Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications

This part of this European Standard defines cold drawn non alloyed steel wire used for the manufacture of: - ropes made of drawn wire for general applications as defined in EN ...; - ropes made of large diameter drawn wire as definied in EN ...; - ropes made of non alloyed drawn wire for which there is no specific EN standard. This part of this standard does not apply to steel wire taken from manufactured ropes.

Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 2: Kaltgezogener Draht aus unlegiertem Stahl für Seile für allgemeine Verwendungszwecke

Dieser Teil dieser Europäischen Norm legt Anforderungen für kaltgezogenen Draht aus unlegiertem Stahl fest, der für die Herstellung von
3 Seilen für allgemeine Verwendungszwecke und für Aufzüge,
3 Seilen für Anwendungen, für die es keine spezielle Europäische Norm gibt,
verwendet wird.
Dieser Teil dieser Europäischen Norm gilt nicht für Drähte aus dem fertigen Seil.
Dieser Teil dieser Europäischen Norm legt zu folgenden Punkten Anforderungen für kaltgezogenen Draht aus unlegiertem Stahl für Seile für allgemeine Anwendungszwecke fest:
3 Maßtoleranzen
3 Mechanische Eigenschaften
3 Anforderungen an die chemische Zusammensetzung des Stahldrahtes
3 Anforderungen an Überzüge
Neben den Anforderungen dieses Teils dieser Europäischen Norm gelten immer auch die Anforderungen von prEN 10264-1.

Fils et produits tréfilés en acier - Fils pour câbles - Partie 2: Fil écrou a froid par tréfilage en acier non allié pour câbles d'usage courant

La présente partie de la Norme européenne définit les fils tréfilés en acier non allié utilisés pour la fabrication de :
câbles pour usage général et ascenseurs ;
câbles pour applications pour lesquelles il n'existe pas de norme EN particuliere.
Cette partie de la présente norme ne s'applique pas aux fils d'acier prélevés sur câbles fabriqués.
La présente partie de la présente norme spécifie pour les fils tréfilés en acier non allié pour câbles d'usage courant :
3 les tolérances dimensionnelles ;
3 les caractéristiques mécaniques ;
3 les exigences concernant la composition chimique des fils en acier ;
3 les conditions auxquelles le revetement éventuel doit satisfaire.
En plus des spécifications de la présente partie 2, les spécifications du prEN 10264-1 s'appliquent toujours.

Jeklena žica in žični izdelki - Jeklena žica za vrvi - 2. del: Hladno vlečena nelegirana jeklena žica za vrvi za splošno uporabo

General Information

Status
Withdrawn
Publication Date
31-Mar-2003
Withdrawal Date
18-Jan-2012
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Jan-2012
Due Date
11-Feb-2012
Completion Date
19-Jan-2012

Relations

Buy Standard

Standard
EN 10264-2:2003
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 2: Kaltgezogener Draht aus unlegiertem Stahl für Seile für allgemeine VerwendungszweckeFils et produits tréfilés en acier - Fils pour câbles - Partie 2: Fil écrou a froid par tréfilage en acier non allié pour câbles d'usage courantSteel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10264-2:2002SIST EN 10264-2:2003en01-april-2003SIST EN 10264-2:2003SLOVENSKI
STANDARD



SIST EN 10264-2:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10264-2March 2002ICS 77.140.65English versionSteel wire and wire products - Steel wire for ropes - Part 2: Colddrawn non alloy steel wire for ropes for general applicationsFils et produits tréfilés en acier - Fils pour câbles - Partie 2:Fil écroui à froid par tréfilage en acier non allié pour câblesd'usage courantStahldraht und Drahterzeugnisse - Stahldraht für Seile -Teil 2: Kaltgezogener Draht aus unlegiertem Stahl für Seilefür allgemeine VerwendungszweckeThis European Standard was approved by CEN on 20 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10264-2:2002 ESIST EN 10264-2:2003



EN 10264-2:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Product designation.44General conditions of manufacture.55Characteristics of wire.55.1Tensile strength grades.55.2Requirements for wire characteristics.66Test methods.106.1General.106.2Measurement of diameter.106.3Tensile test.106.4Reverse bend test.106.5Torsion test.106.6Inspection of zinc or Zn95/Al5 alloy coating.10SIST EN 10264-2:2003



EN 10264-2:2002 (E)3ForewordThis document (EN 10264-1:2002) has been prepared by Technical Committee ECISS/TC 30 "Steelwires", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by September 2002, and conflicting national standards shallbe withdrawn at the latest by September 2002.This European Standard for wire for ropes is made up of the following parts:Part 1:General requirementsPart 2: Cold drawn non alloy steel wire for ropes for general applicationsPart 3:Cold drawn and cold shaped non alloy steel wire for high duty applicationsPart 4:Stainless steel wireAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 10264-2:2003



EN 10264-2:2002 (E)41 ScopeThis part of this European Standard defines cold drawn non alloy steel wire used for the manufactureof: Ropes for general applications and lifts; Ropes for applications for which there is no specific EN standard.This part of this standard does not apply to steel wire taken from manufactured ropes.This part of this European standard specifies the following for cold drawn non alloy steel wire forropes for general applications: dimensional tolerances; mechanical characteristics; requirements relating to the chemical composition of the steel wire; conditions to be satisfied by any coating.In addition to the requirements of this part of this European standard, the requirements of prEN10264-1 also apply.2 Normative referencesThis European Standard incorporates by dated or undated reference provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).EN 10016-1, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements.EN 10016-2, Non alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements forgeneral purposes rod.EN 10218-1, Steel wire and wire products — General — Part 1: Test methods.EN 10244-2, Steel wire and wire products — Non ferrous metallic coatings on steel wire — Part 2:Zinc or zinc alloy coatings.EN 10264-1, Steel wire and wire products – Steel wire for ropes – Part 1: General requirements.3 Product designationThe designation of round wire for ropes, covered by this part of EN 10264, shall be based on thenominal diameter (d), surface appearance and tensile strength classification.
The abbreviation for thesurface finish condition is:U(uncoated) for bright wireA or B for zinc or zinc alloy coating depending on coating class.SIST EN 10264-2:2003



EN 10264-2:2002 (E)5A distinction is made between a zinc and a zinc alloy coating by the addition in brackets of “Zn/Al” forthe zinc alloy.EXAMPLE 1:Wire for rope for general applications with nominal diameter d = 1,5 mm, surface a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.