SIST EN ISO 15614-1:2017/kFprA2:2020

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 2 (ISO 15614-1:2017/FDAM 2:2020)

2020-12-01 (data): WI abandoned to follow cancellation of WI at ISO

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 1: Lichtbogen- und Gasschweißen von Stählen und Lichtbogenschweißen von Nickel und Nickellegierungen - Änderung 2 (ISO 15614-1:2017/FDAM 2:2020)

No scope available

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 1 : Soudage à l'arc et aux gaz des aciers et soudage à l'arc du nickel et des alliages de nickel - Amendement 2 (ISO 15614-1:2017/FDAM 2:2020)

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 1. del: Obločno in plamensko varjenje jekel in obločno varjenje niklja in nikljevih zlitin - Dopolnilo A2 (ISO 15614-1:2017/FDAM 2:2020)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Oct-2019
• ICS: 25.160.10 - Welding processes
• ICS: 77.080.20 - Steels
• ICS: 77.120.40 - Nickel, chromium and their alloys
• Technical Committee: VAR - Welding
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 09-Mar-2021
• Due Date: 14-Mar-2021
• Completion Date: 09-Mar-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 15614-1:2017/FprA2 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 2 (ISO 15614-1:2017/FDAM 2:2020)

Relations

• Revised: SIST EN ISO 15614-1:2017 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
• Effective Date: 01-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15614-1:2017/oprA2:2019
01-oktober-2019
Specifikacija in razvrščanje varilnih postopkov za kovinske materiale - Preskus
varilnega postopka - 1. del: Obločno in plamensko varjenje jekel in obločno
varjenje niklja in nikljevih zlitin - Dopolnilo A2 (ISO 15614-1:2017/DAM 2:2019)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and
nickel alloys - Amendment 2 (ISO 15614-1:2017/DAM 2:2019)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 1: Lichtbogen- und Gasschweißen von Stählen und
Lichtbogenschweißen von Nickel und Nickellegierungen - Änderung 2 (ISO 15614-
1:2017/DAM 2:2019)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 1:
Soudage à l'arc et aux gaz des aciers et soudage à l'arc du nickel et des alliages de
nickel - Amendement 2 (ISO 15614-1:2017/DAM 2:2019)
Ta slovenski standard je istoveten z: EN ISO 15614-1:2017/prA2
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST EN ISO 15614-1:2017/oprA2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15614-1:2017/oprA2:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 15614-1:2017/oprA2:2019
DRAFT AMENDMENT
ISO 15614-1:2017/DAM 2
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-08-15 2019-11-07
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 1:
Arc and gas welding of steels and arc welding of nickel and
nickel alloys
AMENDMENT 2
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 1: Soudage à l'arc et aux gaz des aciers et soudage à l'arc du nickel et des alliages de nickel
AMENDEMENT 2
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 15614-1:2017/DAM 2:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
SIST EN ISO 15614-1:2017/oprA2:2019
ISO 15614-1:2017/DAM 2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
SIST EN ISO 15614-1:2017/oprA2:2019
ISO 15614-1:2017/DAM 2:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with
...