SIST EN 13523-29:2017
(Main)Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
This part of EN 13523 specifies a procedure for the comparative evaluation of resistance to soiling of an organic coating on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as "Tiger stripes".
Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)
Dieser Teil der Normenreihe EN 13523 legt ein Verfahren zum vergleichenden Bewerten der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat (Bandbeschichtung) gegen Schmutz-aufnahme in einer Umgebung im Außenbereich fest, insbesondere die Verschmutzung, die als "Tigerstreifen" bekannt ist.
Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)
La présente partie de l'EN 13523 prescrit un mode opératoire à appliquer pour déterminer, par comparaison, la résistance à la pollution d'un revêtement organique appliqué sur un support métallique (prélaquage) dans un environnement d'exposition extérieur, en particulier la résistance au défaut appelé « zébrures ».
Prevlečene kovine, ki se navijajo - Preskusne metode - 29. del: Odpornost proti onesnaženju iz okolja (zbiranje nesnage in priprava vzorcev)
Ta del standarda EN 13523 določa postopek za primerjalno vrednotenje odpornosti proti onesnaženju organske prevleke na kovinski podlagi (prevleke kovin, ki se navijajo) na prostem, zlasti proti učinku onesnaženja, ki se imenuje »tigrasti vzorec«.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)25.220.60Organske prevlekeOrganic coatings13.020.40Onesnaževanje, nadzor nad onesnaževanjem in ohranjanjePollution, pollution control and conservationICS:Ta slovenski standard je istoveten z:EN 13523-29:2017SIST EN 13523-29:2017en,fr,de01-maj-2017SIST EN 13523-29:2017SLOVENSKI
STANDARDSIST EN 13523-29:20111DGRPHãþD
SIST EN 13523-29:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-29
March
t r s y ICS
t wä t t rä x r Supersedes EN
s u w t uæ t {ã t r s rEnglish Version
Coil coated metals æ Test methods æ Part
t {ã Resistance to Tôles prélaquées æ Méthodes d 5essai æ Partie
t { ã
Bandbeschichtete Metalle æ Prüfverfahren æ Teil
t {ã Beständigkeit gegen Verschmutzung This European Standard was approved by CEN on
u r December
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u w t uæ t {ã t r s y ESIST EN 13523-29:2017
EN 13523-29:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus and materials . 5 6 Sample preparation . 6 7 Procedure. 6 8 Evaluation . 7 9 Test report . 8 Bibliography . 9
SIST EN 13523-29:2017
EN 13523-29:2017 (E) 3 European foreword This document (EN 13523-29:2017) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-29:2010. The main changes are: a) the washing procedure was corrected; b) the procedure in Clause 7 has been clarified; c) the text has been revised editorially and the normative references have been updated. The EN 13523 series, Coil coated metals — Test methods, consists of the following parts: — Part 0: General introduction — Part 1: Film thickness — Part 2: Gloss — Part 3: Colour difference — Instrumental comparison — Part 4: Pencil hardness — Part 5: Resistance to rapid deformation (impact test) — Part 6: Adhesion after indentation (cupping test) — Part 7: Resistance to cracking on bending (T-bend test) — Part 8: Resistance to salt spray (fog) — Part 9: Resistance to water immersion — Part 10: Resistance to fluorescent UV radiation and water condensation — Part 11: Resistance to solvents (rubbing test) — Part 12: Resistance to scratching — Part 13: Resistance to accelerated ageing by the use of heat — Part 14: Chalking (Helmen method) SIST EN 13523-29:2017
EN 13523-29:2017 (E) 4 — Part 15: Metamerism — Part 16: Resistance to abrasion — Part 17: Adhesion of strippable films — Part 18: Resistance to staining — Part 19: Panel design and method of atmospheric exposure testing — Part 20: Foam adhesion — Part 21: Evaluation of outdoor exposed panels — Part 22: Colour difference — Visual comparison — Part 23: Resistance to humid atmospheres containing sulfur dioxide — Part 24: Resistance to blocking and pressure marking — Part 25: Resistance to humidity — Part 26: Resistance to condensation of water — Part 27: Resistance to humid poultice (Cataplasm test) — Part 29: Resistance to environmental soiling (Dirt pick-up and striping) According to
...
SLOVENSKI STANDARD
oSIST prEN 13523-29:2016
01-januar-2016
3UHYOHþHQHNRYLQHNLVHQDYLMDMR3UHVNXVQHPHWRGH GHO 2GSRUQRVWSURWL
RQHVQDåHQMXL]RNROMD ]ELUDQMHQHVQDJHLQSULSUDYDY]RUFHY
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt
pick-up and striping)
Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung
(Schmutzaufnahme und Streifenbildung)
Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution
environnementale (salissures)
Ta slovenski standard je istoveten z: prEN 13523-29
ICS:
25.220.60 Organske prevleke Organic coatings
oSIST prEN 13523-29:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13523-29:2016
---------------------- Page: 2 ----------------------
oSIST prEN 13523-29:2016
DRAFT
EUROPEAN STANDARD
prEN 13523-29
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 25.220.60 Will supersede EN 13523-29:2010
English Version
Coil coated metals - Test methods - Part 29: Resistance to
environmental soiling (Dirt pick-up and striping)
Tôles prélaquées - Méthodes d'essai - Partie 29 : Bandbeschichtete Metalle - Prüfverfahren - Teil 29:
Résistance à la pollution environnementale (salissures) Beständigkeit gegen Verschmutzung
(Schmutzaufnahme und Streifenbildung)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 139.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13523-29:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13523-29:2016
prEN 13523-29:2015 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus and materials . 5
6 Sample preparation . 6
7 Procedure. 6
8 Evaluation . 7
9 Test report . 8
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 13523-29:2016
prEN 13523-29:2015 (E)
European foreword
This document (prEN 13523-29:2015) has been prepared by Technical Committee CEN/TC 139 “Paints
and varnishes”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13523-29:2010.
The main changes are:
a) the washing procedure was corrected;
b) the text has been revised editorially and the normative references have been updated.
The EN 13523 series, Coil coated metals — Test methods, consists of the following parts:
— Part 0: General introduction;
— Part 1: Film thickness;
— Part 2: Gloss;
— Part 3: Colour difference — Instrumental comparison;
— Part 4: Pencil hardness;
— Part 5: Resistance to rapid deformation (impact test);
— Part 6: Adhesion after indentation (cupping test);
— Part 7: Resistance to cracking on bending (T-bend test);
— Part 8: Resistance to salt spray (fog);
— Part 9: Resistance to water immersion;
— Part 10: Resistance to fluorescent UV radiation and water condensation;
— Part 11: Resistance to solvents (rubbing test);
— Part 12: Resistance to scratching;
— Part 13: Resistance to accelerated ageing by the use of heat;
— Part 14: Chalking (Helmen method);
— Part 15: Metamerism;
— Part 16: Resistance to abrasion;
— Part 17: Adhesion of strippable films;
3
---------------------- Page: 5 ----------------------
oSIST prEN 13523-29:2016
prEN 13523-29:2015 (E)
— Part 18: Resistance to staining
— Part 19: Panel design and method of atmospheric exposure testing
— Part 20: Foam adhesion
— Part 21: Evaluation of outdoor exposed panels
— Part 22: Colour difference
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.