Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)

This document specifies requirements for the measurement of preheating temperature, interpass
temperature and preheat maintenance temperature for fusion welding. This document can also
be applied as appropriate in the case of other welding processes. This document does not cover the
measurement of post weld heat treatment temperatures.

Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur (ISO 13916:2017)

Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage (ISO 13916:2017)

L'ISO 13916 :2017 définit les prescriptions relatives à la mesure de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage lors du soudage par fusion. L'ISO 13916 :2017 peut également s'appliquer si nécessaire à d'autres procédés de soudage. L'ISO 13916 :2017 ne couvre pas la mesure des températures lors du traitement thermique après soudage.

Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne temperature in temperature vzdrževanja (ISO 13916:2017)

Ta dokument opredeljuje zahteve za merjenje temperature predgrevanja, medvarkovne temperature in temperature vzdrževanja za talilno varjenje. Ta dokument se lahko uporablja, kot je to ustrezno, tudi za druge postopke varjenja. Ta dokument ne zajema merjenja temperatur za toplotno obdelavo po varjenju.

General Information

Status
Published
Public Enquiry End Date
09-May-2017
Publication Date
11-Jan-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jan-2018
Due Date
12-Mar-2018
Completion Date
12-Jan-2018

Relations

Buy Standard

Standard
EN ISO 13916:2018
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 13916:2017
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 13916:2015
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13916:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 13916:1998
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature vzdrževanja (ISO 13916:2017)
Welding - Measurement of preheating temperature, interpass temperature and preheat
maintenance temperature (ISO 13916:2017)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO 13916:2017)
Soudage - Mesurage de la température de préchauffage, de la température entre passes
et de la température de maintien du préchauffage (ISO 13916:2017)
Ta slovenski standard je istoveten z: EN ISO 13916:2017
ICS:
17.200.99 Drugi standardi v zvezi s Other standards related to
termodinamiko thermodynamics
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 13916:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13916:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 13916:2018


EN ISO 13916
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2017
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 13916:1996
English Version

Welding - Measurement of preheating temperature,
interpass temperature and preheat maintenance
temperature (ISO 13916:2017)
Soudage - Mesurage de la température de Schweißen - Anleitung zur Messung der Vorwärm-,
préchauffage, de la température entre passes et de la Zwischenlagen- und Haltetemperatur (ISO
température de maintien du préchauffage (ISO 13916:2017)
13916:2017)
This European Standard was approved by CEN on 5 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13916:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13916:2018
EN ISO 13916:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 13916:2018
EN ISO 13916:2017 (E)
European foreword
This document (EN ISO 13916:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13916:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13916:2017 has been approved by CEN as EN ISO 13916:2017 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 13916:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 13916:2018
INTERNATIONAL ISO
STANDARD 13916
Second edition
2017-10
Welding — Measurement of
preheating temperature, interpass
temperature and preheat
maintenance temperature
Soudage — Mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du
préchauffage
Reference number
ISO 13916:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 13916:2018
ISO 13916:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 13916:2018
ISO 13916:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 Point of measurement. 1
4.2 Time of measurement . 3
4.3 Test equipment . 3
5 Test report . 3
6 Designation . 3
6.1 General .
...

SLOVENSKI STANDARD
oSIST prEN ISO 13916:2017
01-maj-2017
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature dogrevanja (ISO/DIS 13916:2017)
Welding - Guidance on the measurement of preheating temperature, interpass
temperature and preheat maintenance temperature (ISO/DIS 13916:2017)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO/DIS 13916:2017)
Soudage - Lignes directrices pour le mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du préchauffage (ISO/DIS
13916:2017)
Ta slovenski standard je istoveten z: prEN ISO 13916
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 13916:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13916:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13916:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13916
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-01-18 2017-04-11
Welding — Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
Soudage — Lignes directrices pour le mesurage de la température de préchauffage, de la température
entre passes et de la température de maintien du préchauffage
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13916:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement. 1
3.2 Time of measurement . 2
3.3 Test equipment . 3
4 Test report . 3
5 Designation . 3
5.1 Example 1 . 3
5.2 Example 2 . 3
Bibliography . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

Foreword
ISO 13916 was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding.
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison wi
...

SLOVENSKI STANDARD
oSIST prEN ISO 13916:2015
01-december-2015
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature dogrevanja (ISO/DIS 13916:2015)
Welding - Guidance on the measurement of preheating temperature, interpass
temperature and preheat maintenance temperature (ISO/DIS 13916:2015)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO/DIS 13916:2015)
Soudage - Lignes directrices pour le mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du préchauffage (ISO/DIS
13916:2015)
Ta slovenski standard je istoveten z: prEN ISO 13916:2015
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 13916:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13916:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13916:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13916
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2015-09-24 2015-12-24
Welding — Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
Soudage — Lignes directrices pour le mesurage de la température de préchauffage, de la température
entre passes et de la température de maintien du préchauffage
ICS: 25.160.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13916:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13916:2015
ISO/DIS 13916:2015(E) ISO/CD 13916

Contents Page
Foreword . iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement . 1
3.2 Time of measurement . 3
3.3 Test equipment . 3
4 Test report . 3
5 Designation . 3
5.1 Example 1 . 3
5.2 Example 2 . 3
Bibliography . 4


COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
iii
© ISO 2015 – All rights reserved
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13916:2015
ISO/CD 13916
Contents Page
Foreword . iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement . 1
3.2 Time of measurement . 3
3.3 Test equipment . 3
4 Test report . 3
5 Designation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.