iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 50232:2002

(Main)

Aeronautical ground lighting electrical installation - Isolating transformer: Equipment specifications and tests

Aeronautical ground lighting electrical installation - Isolating transformer: Equipment specifications and tests

D105/108: Lifetime of ENV extended up to 2002-11-01 * D117/066: ENV withdrawn with immediate effect

Aeronautical ground lighting electrical installation - Isolating transformer: Equipment specifications and tests

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
09-Jun-2009
ICS
29.140.50 - Lighting installation systems
93.120 - Construction of airports
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
27-May-2009
Due Date
19-Jun-2009
Completion Date
10-Jun-2009
Ref Project
ENV 50232:1997 - Aeronautical ground lighting electrical installation - Isolating transformer: Equipment specifications and tests

Relations

Replaced By
SIST EN 61823:2003 - Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
Effective Date
06-May-2014
Replaced By
SIST EN 61823:2003 - Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
Effective Date
07-Jun-2022
Replaced By
SIST EN 61823:2003 - Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
Effective Date
29-Jan-2023

Buy Standard

ENV 50232:2002ENV 50232:2002
PreviousNext
Standardization document
ENV 50232:2002
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 50232:2002
01-september-2002
Aeronautical ground lighting electrical installation - Isolating transformer:
Equipment specifications and tests
Aeronautical ground lighting electrical installation - Isolating transformer: Equipment
specifications and tests
Ta slovenski standard je istoveten z: ENV 50232:1997
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
93.120 *UDGQMDOHWDOLãþ Construction of airports
SIST ENV 50232:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 50232:2002

---------------------- Page: 2 ----------------------

SIST ENV 50232:2002

---------------------- Page: 3 ----------------------

SIST ENV 50232:2002

---------------------- Page: 4 ----------------------

SIST ENV 50232:2002

---------------------- Page: 5 ----------------------

SIST ENV 50232:2002

---------------------- Page: 6 ----------------------

SIST ENV 50232:2002

---------------------- Page: 7 ----------------------

SIST ENV 50232:2002

---------------------- Page: 8 ---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61820-3-4:2023(Main)
Electrical installations for lighting and beaconing of aerodromes - Part 3-4: Safety secondary circuits in series circuits - General safety requirements (IEC 61820-3-4:2023)
EN IEC 61820-3-4:2023

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation.
The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes.
This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63067:2020(Main)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests (IEC 63067:2020)
EN IEC 63067:2020

This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61820-1:2019(Main)
Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles (IEC 61820-1:2019)
EN IEC 61820-1:2019

This part of IEC 61820 covers principles of design and installation requirements for AGL
systems including control, monitoring and transformation of energy, the cables and any
electrical component utilized to produce the light intended to be used as a visual aid for air
and ground navigation.
This document defines in general the fundamental principles to provide safe, reliable and
efficient operation of AGL systems independent of the particular system design. Where certain
aspects of design are specific to a particular type of system (e.g. series-circuit), these are
supplemented in the applicable part.
NOTE Local / national regulations can be different from the provisions of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61822:2009
Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
EN 61822:2009

This International Standard specifies the requirements for a Constant Current Regulator (CCR) having a nominal output of 6,6 A for use in an aeronautical ground lighting constant current series circuit. However, CCRs may be manufactured which have a different power rating (kVA) and current steps than those specified in this standard in order to be used on existing circuits. This standard should be applied where appropriate for these CCRs.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50512:2009
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
EN 50512:2009

This European Standard specifies requirements of electrical and mechanical design, installation, maintenance and testing procedures for advanced visual docking guidance systems.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61820-2:2023(Main)
Electrical installations for lighting and beaconing of aerodromes - Part 1-2: Particular requirements for series circuits
prEN IEC 61820-2:2023
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 61820-3-2:2023(Main)
Electrical installations for lighting and beaconing of aerodromes - Particular requirements for series circuit power supplies
FprEN IEC 61820-3-2:2023
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61820-3-4:2023(Main)
Electrical installations for lighting and beaconing of aerodromes - Part 3-4: Safety secondary circuits in series circuits - General safety requirements (IEC 61820-3-4:2023)
EN IEC 61820-3-4:2023

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation.
The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes.
This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63067:2020(Main)
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests (IEC 63067:2020)
EN IEC 63067:2020

This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61820-1:2019(Main)
Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles (IEC 61820-1:2019)
EN IEC 61820-1:2019

This part of IEC 61820 covers principles of design and installation requirements for AGL
systems including control, monitoring and transformation of energy, the cables and any
electrical component utilized to produce the light intended to be used as a visual aid for air
and ground navigation.
This document defines in general the fundamental principles to provide safe, reliable and
efficient operation of AGL systems independent of the particular system design. Where certain
aspects of design are specific to a particular type of system (e.g. series-circuit), these are
supplemented in the applicable part.
NOTE Local / national regulations can be different from the provisions of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day