Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995)

Describes a method for the determination of lead and cadmium given off by the glaze of ceramic tiles. They are placed in an acetic acid solution and the amount of lead and cadmium released is determined by an appropriate method.

Keramische Fliesen und Platten - Teil 15: Bestimmung der Abgabe von Blei und Cadmium-Glasierte Fliesen und Platten (ISO 10545-15:1995)

Dieser Teil von ISO 10545 legt ein Verfahren fest, mit dem die Abgabe von Blei  und Cadmium aus glasierten Fliesen und Platten bestimmt werden kann.

Carreaux et dalles céramiques - Partie 15: Détermination de la teneur en plomb et en cadmium dégagés par les carreaux émaillés (ISO 10545-15:1995)

La présente partie de l'ISO 10545 prescrit une méthode pour la détermination de la teneur en plomb et en cadmium dégagés par la couche d'émail de carreaux céramiques.

Keramične ploščice - 15. del: Ugotavljanje količine svinca in kadmija, ki se izlužita iz loščenih ploščic

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
06-Jul-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jul-2021
Due Date
30-Jul-2021
Completion Date
07-Jul-2021

RELATIONS

Buy Standard

Standard
SIST EN ISO 10545-15:1998
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 10545-15:1998
01-april-1998

.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHNROLþLQHVYLQFDLQNDGPLMDNLVHL]OXåLWD

L]ORãþHQLKSORãþLF

Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO

10545-15:1995)
Keramische Fliesen und Platten - Teil 15: Bestimmung der Abgabe von Blei und
Cadmium-Glasierte Fliesen und Platten (ISO 10545-15:1995)

Carreaux et dalles céramiques - Partie 15: Détermination de la teneur en plomb et en

cadmium dégagés par les carreaux émaillés (ISO 10545-15:1995)
Ta slovenski standard je istoveten z: EN ISO 10545-15:1997
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-15:1998 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10545-15:1998
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-15:1998
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-15:1998
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-15:1998
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-15:1998
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-15:1998
INTERNATIONAL ISO
STANDARD 1054545
First edition
1995-11-01
Ceramic tiles -
Part 15:
Determination of lead and Cadmium given off by
glazed tiles
Carreaux et dailes chramiques -
Partie ? 5: D&ermination de Ia teneur en plomb et en Cadmium dkgag6s par
/es carreaux &maill&
Reference number
ISO 10545-15: 1995(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-15:1998
ISO 10545=15:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide fed-
eration of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO tech-
nical committees. Esch member body interested in a subject for which a
technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO collabor-
ates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are cir-
culated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10545-15 was prepared by Technical Commit-
tee ISOfTC 189, Ceramic tile.
ISO 10545 consists of the following Parts, under the general title Ceramic
tiles:
- Part 7: Sampling and basis for acceptance
- Part 2: Determination of dimensions and surface quality
- Part 3: Determination of water absorption, apparent porosity, apparen t
relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of Impact resis tance by measurement of coef-
ficient of restitution
- Part 6: Determination of resis tance to deep abrasion for unglazed tiles
0 ISO 1995

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced

or utilized in any form or by any means, electronie or mechanical, including photocopying and

microfilm, without permission in writing from the publisher.
International Organization for Standardization
l CH-1 211 Geneve 20 l Switzerland
Case postale 56
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-15:1998
ISO 10545=15:1995(E)
0 ISO
- Part 7: Determination of resistance to surface abrasion for glazed tiles
- Part 8: Determination of linear thermal expansion
- Part 9: Determination of resistance to thermal shock
- Part 7 0: Determination of moisture expansion
- Part 7 7: Determination of crazing resis tance for glazed tiles
- Part 72: Determination of frost resistance
- Part 73: Determination of Chemical resistance
- Part 74: Determination of resistance to stains
- Part 75: Determination of lead and Cadmium given off by glazed tiles
- Part 76: Determination of small colour differentes
- Part 7 7: Determination of coefficient of friction
---------------------- Page: 9 ----------------------
SIST EN ISO 10545-15:1998
This page in nally left blank
tentio
---------------------- Page: 10 ----------------------
SIST EN ISO 10545-15:1998
INTERNATIONAL STANDARD o ISO ISO 105&15:1995(E)
Ceramic tiles -
Part 15:
Determination of lead and Cadmium given off by glazed tiles
4.1 Test solution: acetic acid Solution, 4 % (V/V).
1 Scope
Add 40 ml of glacial acetic acid (R 1 of ISO 6353-2:
1983) to 960 ml of distilled water of grade 2.
This part of ISO 10545 specifies a method for the
determination of lead and Cadmium given off by the
glaze of ceramic tiles.
5 Apparatus and materials
5.1 Atomic absorption spectrometer, or ot
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.