SIST EN IEC 63129:2020/oprA1:2024
(Amendment)Amendment 1 - Determination of inrush current characteristics of lighting products
Amendment 1 - Determination of inrush current characteristics of lighting products
Bestimmung der Eigenschaften des Einschaltstroms von Beleuchtungsprodukten
Amendement 1 - Détermination des caractéristiques du courant d'appel des produits d'éclairage
Določitev značilnosti vklopnega toka pri izdelkih za razsvetljavo - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Določitev značilnosti vklopnega toka pri izdelkih za razsvetljavo - Dopolnilo A1
Amendment 1 - Determination of inrush current characteristics of lighting products
Bestimmung der Eigenschaften des Einschaltstroms von Beleuchtungsprodukten
Amendement 1 - Détermination des caractéristiques du courant d'appel des produits
d'éclairage
Ta slovenski standard je istoveten z: EN IEC 63129:2020/prA1:2024
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
34/1235/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63129/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-10-25 2025-01-17
SUPERSEDES DOCUMENTS:
34/1183/CD, 34/1203A/CC
IEC TC 34 : LIGHTING
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
TC 23,SC 23B,SC 23E,SC 34A,SC 34C,SC 121A
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 1 - Determination of inrush current characteristics of lighting products
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
IEC CDV 63129 A1 © IEC 2024 2 34/1235/CDV
1 FOREWORD
2 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
3 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
4 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
5 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
6 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
7 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
8 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
9 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
10 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
11 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
12 consensus of opinion on the relevant subjects since each technical committee has representation from all
13 interested IEC National Committees.
14 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
15 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
16 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
17 misinterpretation by any end user.
18 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
19 transparently to the maximum extent possible in their national and regional publications. Any divergence between
20 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
21 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
22 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
23 services carried out by independent certification bodies.
24 6) All users should ensure that they have the latest edition of this publication.
25 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
26 members of its technical committees and IEC National Committees for any personal injury, property damage or
27 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
28 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
29 Publications.
30 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
31 indispensable for the correct application of this publication.
32 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
33 patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
34 respect thereof. As of the date of publication of this document, IEC had received notice of (a) patent(s), which
35 may be required to implement this document. However, implementers are cautioned that this may not represent
36 the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
37 shall not be held responsible for identifying any or all such patent rights.
38 This amendment has been prepared by IEC technical committee 34: Lighting. It is an
39 International Standard.
40 This edition includes a modification of Annex A: Application of inrush current characteristics.
42 The text of this amendment is based on the following documents:
Draft Report on voting
XX/XXX/FDIS XX/XXX/RVD
44 Full information on the voting for its approval can be found in the report on voting indicated in
45 the above table.
46 The language used for the development of this International Standard is English.
47 This document was drafted in accordance with and developed in accordance with
48 ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement available at
49 www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
50 described in greater detail at www.iec.ch/publications.
51 The committee has decided that the contents of this document will remain unchanged until the
52 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
53 specific document. At this date, the document will be
54 • reconfirmed,
55 • withdrawn,
IEC CDV 63129 A1 © IEC 2024 3 34/1235/CDV
56 • replaced by a revised edition, or
57 • amended.
IEC CDV 63129 A1 © IEC 2024 4 34/1235/CDV
60 AMENDMENT 1 - DETERMINATION OF INRUSH CURRENT
61 CHARACTERISTICS OF LIGHTING PRODUCTS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.