EN ISO 17225-1:2014
(Main)Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014)
Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014)
ISO 17225-1:2014 determines the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from a) forestry and arboriculture; b) agriculture and horticulture; and c) aquaculture.
Chemically treated material may not include halogenated organic compounds or heavy metals at levels higher than those in typical virgin material values or higher than typical values of the country of origin.
Biogene Festbrennstoffe - Brennstoffspezifikationen und -klassen - Teil 1: Allgemeine Anforderungen (ISO 17225-1:2014)
Dieser Teil von ISO 17225 legt die qualitätsbezogenen Brennstoffklassen und Spezifikationen für biogene Festbrennstoffe aus Rohmaterial und verarbeitetem Material fest, die aus folgenden Quellen stammen:
a) Forstwirtschaft und Baumkultur;
b) Landwirtschaft und Gartenbau;
c) Aquakultur.
Chemisch behandeltes Material darf halogen-organische Verbindungen oder Schwermetalle nicht in Konzentrationen enthalten, die über denen der typischen Werte für naturbelassenes Material (siehe Anhang B) oder der typischen Werte für das Herkunftsland liegen.
ANMERKUNG Roh und verarbeitetes Material umfasst holzartige Biomasse, halmgutartige Biomasse, Biomasse von Früchten, aquatische Biomasse und biologisch abbaubaren Abfall aus den vorstehend genannten Bereichen.
Biocombustibles solides - Classes et spécifications des combustibles - Partie 1: Exigences générales (ISO 17225-1:2014)
L'ISO 17225-1:2014 détermine les classes de qualité et les spécifications des biocombustibles solides de matières premières et de matières transformées provenant de:
a) la sylviculture et l'arboriculture;
b) l'agriculture et l'horticulture;
c) l'aquaculture.
Les niveaux de composés organiques halogénés ou de métaux lourds inclus dans les matériaux traités chimiquement ne doivent pas dépasser les valeurs des matériaux vierges ou les valeurs types du pays d'origine.
Trdna biogoriva - Specifikacije goriv in razredi - 1. del: Splošne zahteve (ISO 17225-1:2014)
Standard EN ISO 17225-1 določa razrede kakovosti goriva in specifikacije za trdna biogoriva iz surovih in obdelanih materialov, ki izvirajo iz a) gozdarstva in gojenja dreves, b) kmetijstva in vrtnarstva, c) gojenja vodnih organizmov. Kemično obdelan material ne sme vsebovati večje količine halogeniranih organskih spojin ali težkih kovin, kot jih vsebujejo običajni primarni materiali (glejte Dodatek B) ali količine, večje od običajne v državi izvora.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN 14961-1:2010
Trdna biogoriva - Specifikacije goriv in razredi - 1. del: Splošne zahteve (ISO 17225
-1:2014)
Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO
17225-1:2014)
Feste Biobrennstoffe - Brennstoffspezifikationen und -klassen - Teil 1: Allgemeine
Anforderungen (ISO 17225-1:2014)
Biocombustibles solides - Classes et spécifications des combustibles - Partie 1:
Exigences générales (ISO 17225-1:2014)
Ta slovenski standard je istoveten z: EN ISO 17225-1:2014
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17225-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 27.190; 75.160.10 Supersedes EN 14961-1:2010
English Version
Solid biofuels - Fuel specifications and classes - Part 1: General
requirements (ISO 17225-1:2014)
Biocombustibles solides - Classes et spécifications des Feste Biobrennstoffe - Brennstoffspezifikationen und -
combustibles - Partie 1: Exigences générales (ISO 17225- klassen - Teil 1: Allgemeine Anforderungen (ISO 17225-
1:2014) 1:2014)
This European Standard was approved by CEN on 3 April 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17225-1:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 17225-1:2014) has been prepared by Technical Committee ISO/TC 238 “Solid
biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14961-1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17225-1:2014 has been approved by CEN as EN ISO 17225-1:2014 without any modification.
INTERNATIONAL ISO
STANDARD 17225-1
First edition
2014-05-01
Solid biofuels — Fuel specifications
and classes —
Part 1:
General requirements
Biocombustibles solides — Classes et spécifications des
combustibles —
Partie 1: Exigences générales
Reference number
ISO 17225-1:2014(E)
©
ISO 2014
ISO 17225-1:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 17225-1:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Principle . 3
6 Classification of origin and sources of solid biofuels . 4
6.1 General . 4
6.2 Woody biomass . 9
6.3 Herbaceous biomass . 9
6.4 Fruit biomass . 9
6.5 Aquatic biomass .10
6.6 Biomass blends and mixtures .10
7 Specification of solid biofuels based on traded forms and properties .10
7.1 Traded forms of solid biofuels .10
7.2 Specification of properties of solid biofuels .11
Annex A (informative) Illustrations of typical forms of wood fuels .37
Annex B (informative) Typical values of solid biomass fuels .39
Annex C (informative) Examples of possible causes for deviant levels for different properties and
of consequences of handling and treatments for the properties of biomass .49
Annex D (informative) Calculation of the net calorific value at different bases and energy density
as received .51
Annex E (informative) Comparison of moisture content as received and dry basis .54
Bibliography .56
ISO 17225-1:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 238, Solid biofuels.
ISO 17225 consists of the following parts, under the general title Solid biofuels — Fuel specifications and
classes:
— Part 1: General requirements
— Part 2: Graded wood pellets
— Part 3: Graded wood briquettes
— Part 4: Graded wood chips
— Part 5: Graded firewood
— Part 6: Graded non-woody pellets
— Part 7: Graded non-woody briquettes
iv © ISO 2014 – All rights reserved
ISO 17225-1:2014(E)
Introduction
The objective of the ISO 17225 series is to provide unambiguous and clear classification principles for
solid biofuels and to serve as a tool to enable efficient trading of biofuels and to enable good understanding
between seller and buyer as well as a tool for communication with equipment manufacturers. It will also
facilitate authority permission procedures and reporting.
The ISO 17225 series is made for all stakeholders.
Solid biomass covers organic, non-fossil material of biological origin which may be used as fuel for heat
and electrical generation.
Figure 1 describes the bioenergy utilization chain from sources of biomass, to biofuel production to final
use of bioenergy. Although biomass can be used for energy generation it has many other primary uses
(non-fuels) as a raw material for construction, furniture, packaging, paper products, etc.
Figure 1 — ISO TC 238 within the biomass — Biofuel — Bioenergy field
The classifications given in this International Standard are provided with the objective of using biomass
as a solid biofuel and therefore do not deal with all other uses.
Although these product standards may be obtained separately, they require a general understanding of
the standards based on and supporting ISO 17225-1. It is recommended to obtain and use ISO 17225-1
in conjunction with these standards.
In these product standards, graded means that solid biofuel is used either in commercial applications,
such as in households and small commercial and public sector buildings
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.