ENV 1090-2:1998

Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting

Preparation ENV approved by BTS1 C18/1994.
Derogation from the PNE rules for prENV 1090-1 to -5 (for the ENV phase only) according to BT C 55/1996 (this resolution replaces resolution BT 8/1996)
Res. 3/97 : FV launched (MB970718)

Ausführung von Tragwerken aus Stahl - Teil 2: Ergänzende Regeln für kaltgeformte dünnwandige Bauteile und Bleche

Exécution des structures en acier - Partie 2: Règles supplémentaires pour les bacs nervurés et les éléments minces formés à froid

This part of ENV 1090 specifies particular requirements for the execution of steel structures produced from cold formed thin gauge members and sheeting designated construction classes I and II in ENV 1993-1-1. Note 1: Supplementary rules for execution of cold formed hollow sections are given in ENV 1090-4. Note 2: The construction classes differentiate between levels of reliability.

Izdelava in montaža jeklenih konstrukcij - 2. del: Dodatna pravila za hladno oblikovane tankostenske profile in pločevine

General Information

• Status: Withdrawn
• Publication Date: 21-Jul-1998
• Withdrawal Date: 22-Jul-2008
• ICS: 77.140.50 - Flat steel products and semi-products
• ICS: 91.080.10 - Metal structures
• ICS: 91.080.13 - Steel structures
• Technical Committee: CEN/TC 135 - Execution of steel structures
• Drafting Committee: CEN/TC 135/WG 6 - Execution of cold formed thin gauge members and sheeting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Jul-2008
• Completion Date: 23-Jul-2008
• Ref Project: SIST ENV 1090-2:2001 - Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting

Relations

• Replaced By: EN 1090-2:2008 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
• Effective Date: 22-Dec-2008

Standards Content (Sample)

S L O V E N S K I SIST ENV 1090-2
prva izdaja
PREDSTANDARD
julij 2001
Izdelava in montaža jeklenih konstrukcij – 2. del: Dopolnilna pravila za
hladno oblikovane tankostenske profile in pločevine
(prevzet ENV 1090-2:1998 z metodo platnice)
Execution of steel structures - Part 2: Supplementary rules for cold formed thin
gauge components and sheeting
Exécution des structures en acier - Partie 2: Règles supplémentaires pour les
bacs nervurés et les élémentes minces formés à froid
Ausführung von Tragwerken aus Stahl - Teil 2: Ergänzende Regeln für
kaltgeformte dünnwandige Bauteile und Bleche
Deskriptorji: jeklene konstrukcije, konstrukcijska jekla, pločevine, hladno oblikovanje, pogoji
izvajanja, izdelava, stikovanje, varjenje, spojna sredstva, geometrijska
odstopanja, zaščita, pregledi
Referenčna številka
ICS 77.140.50; 91.080.10 SIST ENV 1090-2:2001 ((sl),en)
Nadaljevanje na straneh od II do IV in od 1 do 35
© Standard je založil in izdal Urad Republike Slovenije za meroslovje. Razmnoževanje ali kopiranje celote ali delov tega standarda ni
dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1090-2 : 2001
NACIONALNI UVOD
Predstandard SIST ENV 1090-2 ((sl),en), Izdelava in montaža jeklenih konstrukcij - 2. del: Dopolnilna
pravila za hladno oblikovane tankostenske profile in pločevine, prva izdaja, 2001, ima status
slovenskega predstandarda in je z metodo platnice prevzet evropski predstandard ENV 1090-2 (en),
Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and
sheeting, July 1998.
NACIONALNI PREDGOVOR
Evropski predstandard ENV 1090-2:1998 je pripravil tehnični odbor Evropskega komiteja za
standardizacijo CEN/TC 135 Izdelava in montaža jeklenih konstrukcij.
Odločitev za prevzem tega predstandarda po metodi platnice je sprejela delovna skupina USM/TC
KON/WG 3 Jeklene konstrukcije, ki je pripravila tudi nacionalni dokument za uporabo v Sloveniji,
potrdil pa tehnični odbor USM/TC
...