iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 414:2000

(Main)

Safety of machinery - Rules for the drafting and presentation of safety standards

Safety of machinery - Rules for the drafting and presentation of safety standards

This document specifies requirements for the drafting and presentation of European machinery safety standards and standards for safety components, primarily to achieve consistency and acceptable quality, throughout the programme, of the various standards to be prepared (also to meet the requirements of the Mandate from the European Commission). It also gives requirements on the criteria for the selection of new work items and for procedures to prepare and produce standards in an efficient and effective way.

Sicherheit von Maschinen - Regeln für die Abfassung und Gestaltung von Sicherheitsnormen

Dieses Dokument legt Anforderungen für die Abfassung und Gestaltung von Europäischen Sicherheitsnormen für Maschinen und Sicherheitsbauteile fest, in erster Linie um innerhalb des Arbeitsprogrammes die Übereinstimmung und eine annehmbare Qualität der verschiedenen Normen, die erarbeitet werden, zu erreichen (und auch, um die Anforderungen des Mandates der Europäischen Kommission zu erfüllen). Es werden auch Anforderungen bezüglich der Kriterien für die Auswahl von neuen Arbeitsthemen sowie für die Durchführung der Arbeiten angeboten, die eine schnelle und wirksame Vorbereitung und Erarbeitung von Normen ermöglichen.

Sécurité des machines - Règles pour l'élaboration et la présentation des normes de sécurité

Le présent document précise les prescriptions pour la préparation et la présentation des normes de sécurité européennes, relatives aux machines, et des normes relatives aux composants de sécurité, principalement pour améliorer la cohésion et une qualité acceptable des diverses normes à préparer (également pour satisfaire les prescriptions du mandat de la Commission Européenne). Des prescriptions sont également données sur les critères de sélection des travaux nouveaux et sur les procédures de préparation et d'élaboration des normes de manière efficace et productive.

Varnost strojev - Pravila za načrtovanje in predstavljanje varnostnih standardov

General Information

Status
Withdrawn
Publication Date
18-Apr-2000
Withdrawal Date
14-Dec-2004
ICS
01.120 - Standardization. General rules
13.110 - Safety of machinery
Technical Committee
CEN/TC 114 - Safety of machinery
Drafting Committee
CEN/TC 114/WG 4 - Rules for the drafting and presentation of safety standards
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2004
Completion Date
15-Dec-2004
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 414:2002 - Safety of machinery - Rules for the drafting and presentation of safety standards

Relations

Replaces
EN 414:1992 - Safety of machinery - Rules for the drafting and presentation of safety standards
Effective Date
22-Dec-2008

Buy Standard

EN 414:2002EN 414:2002
PreviousNext
Standard
EN 414:2002
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 414:2002
01-september-2002
1DGRPHãþD
SIST EN 414:1995
9DUQRVWVWURMHY3UDYLOD]DQDþUWRYDQMHLQSUHGVWDYOMDQMHYDUQRVWQLKVWDQGDUGRY
Safety of machinery - Rules for the drafting and presentation of safety standards
Sicherheit von Maschinen - Regeln für die Abfassung und Gestaltung von
Sicherheitsnormen
Sécurité des machines - Regles pour l'élaboration et la présentation des normes de
sécurité
Ta slovenski standard je istoveten z: EN 414:2000
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
13.110 Varnost strojev Safety of machinery
SIST EN 414:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 414:2002

---------------------- Page: 2 ----------------------

SIST EN 414:2002

---------------------- Page: 3 ----------------------

SIST EN 414:2002

---------------------- Page: 4 ----------------------

SIST EN 414:2002

---------------------- Page: 5 ----------------------

SIST EN 414:2002

---------------------- Page: 6 ----------------------

SIST EN 414:2002

---------------------- Page: 7 ----------------------

SIST EN 414:2002

---------------------- Page: 8 ----------------------

SIST EN 414:2002

---------------------- Page: 9 ----------------------

SIST EN 414:2002

---------------------- Page: 10 ----------------------

SIST EN 414:2002

---------------------- Page: 11 ----------------------

SIST EN 414:2002

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12786:2013(Main)
Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards
SIST EN 12786:2013

This European Standard gives guidance for the writers of harmonized type-C machinery safety standards on how to deal with vibration where hand-transmitted vibration and/or whole-body vibration is identified as a significant hazard.
This European Standard also gives guidance on how to deal with the requirement for declaration of the vibration emission of portable hand-held and/or hand-guided machinery and for mobile machinery.
This European Standard supplements EN ISO 12100.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2612:2023(Main)
Analysis of natural gas - Biomethane - Determination of ammonia content by Tuneable Diode Laser Absorption Spectroscopy (ISO 2612:2023)
kSIST prEN ISO 2612:2023

This document describes several test methods for measuring the ammonia amount fraction in natural gas and biomethane at the trace level (µmol mol-1). The suitable handling and sampling of pressurised mixtures of ammonia in methane that are applied to several different ammonia measurement systems are described. The measurement systems are comprised of readily available commercial spectroscopic analysers that are specific to ammonia. These NH3 analysers are considered as a black box in terms of their operation, which is dependent on the instructions of the manufacturer. The document describes suitable calibration and measurement strategies to quantify ammonia in (bio)methane around and above the 10 mg m-3 (14 µmol mol-1) level and applies to analysis within absolute pressure ranges of 1 bar – 2 bar, temperatures of 0 °C – 40 °C and relative humidity <90 %.
References are also made to additional standards that are applied either to natural gas analysis or air quality measurements. In this document the matrix gas is always methane or biomethane and the measurand is the amount fraction NH3.
NOTE            1 bar = 0,1 MPa =105 Pa; 1 MPa = 1 N/mm2.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14025:2023(Main)
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
kSIST FprEN 14025:2023

This document specifies the minimum requirements for the design and construction of metallic
pressure tanks for the transport of dangerous goods by road and rail and sea. It is not
applicable to gravity-discharge tanks according to RID/ADR 6.8.2.1.14 (a).
This document includes requirements for openings, closures and structural equipment; it does not cover requirements of service equipment. For tanks for the transport of cryogenic liquids, EN 13530-1 and EN 13530-2 apply.
Design and construction of pressure tanks according to the Scope of this document are primarily subject to the requirements of RID/ADR, Subsections 6.8.2.1, 6.8.3.1 and 6.8.5, as relevant. In addition, the relevant requirements of RID/ADR, Table A, columns 12 and 13, to Chapters 3.2, 4.3 and Subsection 6.8.2.4 apply. For the structural equipment RID/ADR, Subsections 6.8.2.2 and 6.8.3.2 apply, as relevant. The definitions of RID/ADR, Subsection 1.2.1, are referred to. For portable tanks see also RID/ADR, Chapter 4.2 and Sections 6.7.2 and 6.7.3. In addition, the relevant requirements of RID/ADR, Table A, Columns 10 and 11 to Chapters 3.2, 4.2, and Sections 6.7.2 and 6.7.3 apply. The paragraph numbers above relate to the 2017 issue of RID/ADR which are subject to regular revisions. This can lead to temporary non-compliances with EN 14025.
This document is applicable to liquefied gases including LPG; however for a dedicated LPG standard see EN 12493.
If not otherwise specified, provisions which take up the whole width of the page apply to all kind of tanks. Provisions contained in a single column apply only to:
-tanks according to RID/ADR Chapter 6.8 (left-hand column);
-portable tanks according to RID/ADR Chapter 6.7 (right-hand column).

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
kSIST FprEN 15185:2023

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2996-006:2023(Main)
Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm and 2,8 mm blade terminal - With polarized signal contact - Product standard
kSIST FprEN 2996-006:2023

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between -55 °C and 125 °C for ratings ≤ 15 A and -55 °C to 90 °C for ratings > 15 A and at an altitude of 15 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping.
They will continue to function up to the short-circuit current.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16307-5:2023(Main)
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
kSIST FprEN 16307-5:2023

This document specifies requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5:2015.
This document is intended to be used in conjunction with EN ISO 3691-5:2015.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to pedestrian-propelled trucks, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   protection against crushing, shearing and trapping;
-   electrical requirements;
-   electromagnetic immunity.
These requirements are supplementary to those stated in EN ISO 3691-5:2015 with the addition of requirements for the following hazard:
-   electromagnetic immunity (external radiation).
This document partially replaces the following requirement of EN ISO 3691-5:2015:
-   electrical requirements.
This document specifies supplementary requirements to EN ISO 3691-5:2015:
-   protection against crushing, shearing and trapping;
-   information for use (instruction handbook and marking).
This document does not specify supplementary requirements to EN ISO 3691-5:2015:
-   static electricity;
-   radiation;
-   general principles for the drafting of instructions;
-   sales literature.
Annex A (informative) contains the list of significant hazards covered by this document.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3774-006:2023(Main)
Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal - Product standard
oSIST prEN 3774-006:2020

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between −55 °C and 125 °C for ratings ≤ 15 A and −55 °C to 90 °C for ratings > 15 A and at an altitude of 15 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping.
They will continue to function up to the short-circuit current.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10088-3:2023(Main)
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
kSIST FprEN 10088-3:2023

This document specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resistant stainless steels for general purposes.
NOTE   General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this document, unless otherwise specified in this document.
This document does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 6042:2023(Main)
Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
kSIST FprEN 6042:2023

This test method describes the principles applicable to infrared transmission spectrophotometric analysis of organic compounds (elastomers, basic resins, resin mixes or resin systems) used as the matrix in reinforced polymers, adhesives, bonding primers and, in general terms, all organic compounds.
The method could also be applied to some inorganic products.
It is intended to be used jointly with special test conditions specified in the materials specification invoking the test.
This document does not give any directions necessary to meet the health and safety requirements. It is the responsibility of the user of this document to adopt appropriate health and safety precautions.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17818:2023(Main)
Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis
kSIST FprEN 17818:2023

This document defines the minimum requirements for treatment systems, which generate the active substance - “Active chlorine” - from sodium chloride by electrolysis for on-site (in situ) operation.
The in situ generated active substance (IGAS), in this case active chlorine, may be put into a solution (“off-line”) or directly generated in the pipes (“in-line”).
This document specifies the device construction, and test methods for the equipment used for in situ generation of active chlorine. It specifies requirements for instructions for installation, operation, maintenance, safety and for documentation to be provided with the product.
The in situ generation of active substances and the placing of their precursors on the EU market are subject to the specifications of the Biocidal Products Regulation (EU) 528/2012 [“Biocidal products”]. Active substances, generated by devices, which are claiming compliance with this document, shall comply with the BPR for both the registered active chlorine, quality standards and the precursor in accordance with appropriate application and “Product Type” as listed in the BPR.
This standard does not identify applications for in situ devices for generation of active chlorine. The range of applications for in situ generation of chlorine is diverse. It is the responsibility of the economic operator/product supplier, claiming compliance with this standard, to identify the appropriate system type and operating conditions for the specific application and to:
-   specify the quality of the biocide appropriate to the application. This may be defined in national or international standards;
-   specify the appropriate product type and operating conditions (concentration, dosage rate and quality of the active chlorine);
-   specify any other regulatory requirements relevant to the specific application;
-   specify the appropriate precursor sodium chloride, for the application;
-   and to label the product accordingly.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day