EN 15381:2008
(Main)Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
This European Standard specifies the relevant characteristics of metallic and non-metallic geotextiles and geotextile-related products used in the construction of pavements and asphalt overlays and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles and geotextile-related products is to fulfil one or more of the following functions: reinforcement, stress relief and barrier. The use of geotextiles and geotextile-related products is to be considered as a part of an interlayer and asphalt overlay system.
This standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318.
This standard provides for evaluation of conformity of the product to this European Standard and for factory production control procedures.
This standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.
NOTE 1 Particular application cases or national specifications may contain additional requirements regarding product application or installation and specifying preferably standardized test methods, if they are technically relevant and not conflicting with European Standards.
Geotextilien und geotextilverwandte Produkte - Eigenschaften, die für die Anwendung beim Bau von Fahrbahndecken und Asphaltdeckschichten erforderlich sind
Diese Europäische Norm legt die relevanten Eigenschaften von metallischen und nicht metallischen Geotextilien und geotextilverwandten Produkten, die beim Bau von Fahrbahndecken und Asphaltdeckschichten verwendet werden, sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Die bestimmungsgemäße Anwendung dieser Geotextilien und geotextilverwandten Produkte besteht in der Erfüllung einer oder mehrerer der folgenden Funktionen: Bewehren, Spannungsentlastung und Abdichten. Die Verwendung von Geotextilien und geotextilverwandten Produkten ist als ein Bestandteil eines Zwischenschicht und Asphalt¬deckschichtsystems zu betrachten.
Diese Europäische Norm ist nicht auf geosynthetische Dichtungsbahnen, wie in EN ISO 10318 festgelegt, anwendbar.
Diese Europäische Norm behandelt die Konformitätsbewertung des Produktes bezüglich dieser Europäischen Norm und die werkseigene Produktionskontrolle.
Diese Europäische Norm legt Anforderungen fest, die von Herstellern und Händlern für die Darstellung von Produkteigenschaften zu beachten sind.
ANMERKUNG Besondere Anwendungen oder nationale Bestimmungen können Anforderungen hinsichtlich zusätzlicher Eigenschaften und — vorzugsweise genormter — Prüfverfahren enthalten, wenn diese technisch relevant sind und sie Europäischen Normen nicht entgegenstehen.
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les chaussées et couches de roulement en enrobés
La présente Norme européenne spécifie les caractéristiques applicables des géotextiles et produits apparentés utilisés dans la construction des chaussées et de couches de roulement en enrobés et les méthodes d'essai appropriées pour la détermination de ces caractéristiques.
L'utilisation prévue de ces géotextiles et produits apparentés est de satisfaire l'une ou plusieurs des fonctions suivantes : le renforcement, la réduction de contraintes et l’utilisation en tant que couche d'étanchéité. L'utilisation de géotextiles et produits apparentés doit être considérée comme faisant partie d'un complexe intercouches et de couche de roulement en enrobé.
La présente norme ne s'applique pas aux géomembranes définies dans l’EN ISO 10318.
La présente norme donne les informations permettant d'évaluer la conformité du produit à la présente Norme européenne et définissant les procédures de contrôle de fabrication en usine.
La présente norme définit les exigences auxquelles les fabricants et distributeurs doivent satisfaire pour la présentation des propriétés du produit.
NOTE 1 Dans certains cas particuliers d'application ou pour des spécifications nationales, des propriétés et des méthodes d'essai supplémentaires - de préférence normalisées - peuvent être définies à condition qu'elles soient pertinentes d'un point de vue technique et qu'elles ne soient pas en opposition avec les Normes européennes.
Geotekstilije in geotekstilijam sorodni izdelki - Zahtevane lastnosti za uporabo na voziščih in asfaltnih prevlekah
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotextilien und geotextilverwandte Produkte - Eigenschaften, die für die Anwendung beim Bau von Fahrbahndecken und Asphaltdeckschichten erforderlich sindGéotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les chaussées et couches de roulement en enrobésGeotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays93.080.20Materiali za gradnjo cestRoad construction materials59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 15381:2008SIST EN 15381:2009en,fr,de01-januar-2009SIST EN 15381:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15381August 2008ICS 59.080.70; 93.080.20 English VersionGeotextiles and geotextile-related products - Characteristicsrequired for use in pavements and asphalt overlaysGéotextiles et produits apparentés - Caractéristiquesrequises pour l'utilisation dans les chaussées et couchesde roulement en enrobésGeotextilien und geotextilverwandte Produkte -Eigenschaften, die für die Anwendung beim Bau vonFahrbahndecken und Asphaltdeckschichten erforderlichsindThis European Standard was approved by CEN on 18 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15381:2008: ESIST EN 15381:2009
Characteristics relevant to specific conditions of use.10 4.2.1 General.10 4.2.2 Alkaline resistance.10 4.2.3 Melting point.11 4.2.4 Resistance to weathering.11 5 Evaluation of conformity.11 5.1 General.11 5.2 Verification of values.11 5.3 Initial type tests.12 5.4 Factory production control.12 5.5 Inspection.13 6 Marking.13 Annex A (normative)
Factory production control.14 A.1 Items to be addressed in a factory production control system.14 A.1.1 General.14 A.1.2 Product design.14 A.1.3 Production.14 A.1.4 Finished products.14 A.1.5 Applicable to A.1.2, A1.3 and A.1.4 (to be used where appropriate).15 A.2 Checklist for the assessment of a factory production control system.16 A.2.1 General.16 A.2.2 Checklist.16 Annex B (normative)
Durability aspects.21 B.1 Weathering.21 B.2 Alkaline resistance.22 B.3 Corrosion resistance.22 Annex C (normative)
Test method for the determination of the bitumen retention in paving fabrics used in pavements and asphalt overlays.23 C.0 Introduction.23 C.1 Scope.23 C.2 Test specimens.23 C.2.1 Handling.23 C.2.2 Selection.23 C.2.3 Number and dimensions.23 C.2.4 Condition of specimens.24 C.3 Testing procedure.24 C.4 Test report.25 Annex D (normative)
Tensile test on steel wire mesh.26 SIST EN 15381:2009
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.27 ZA.1 Scope and relevant characteristics.27 ZA.2 Procedure for the attestation of conformity of geotextiles and geotextile-related products used in pavements and asphalt overlays.30 ZA.2.1 Systems of attestation of conformity.30 ZA2.2 Certificate and declaration of conformity.31 ZA.3 CE-marking and labelling.32 Bibliography.36
The intended use of these geotextiles and geotextile-related products is to fulfil one or more of the following functions: reinforcement, stress relief and barrier. The use of geotextiles and geotextile-related products is to be considered as a part of an interlayer and asphalt overlay system. This standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318. This standard provides for evaluation of conformity of the product to this European Standard and for factory production control procedures. This standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties. NOTE 1 Particular application cases or national specifications may contain additional requirements regarding product application or installation and specifying preferably standardized test methods, if they are technically relevant and not conflicting with European Standards. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1426, Bitumen and bituminous binders – Determination of needle penetration EN 10002-1, Metallic materials – Tensile testing – Part 1: Method of test at ambient temperature EN 10080, Steel for the reinforcement of concrete – Weldable reinforcing steel – General
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.