EN 13523-23:2023

Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide

This document describes the procedure for determining the resistance of an organic coating on a metallic substrate to humid atmospheres containing sulfur dioxide.

Bandbeschichtete Metalle - Prüfverfahren - Teil 23: Beständigkeit gegen feuchte, Schwefeldioxid enthaltende Atmosphären

Dieses Dokument legt das Verfahren zum Bestimmen der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat gegen feuchte, Schwefeldioxid enthaltende Atmosphären fest.

Tôles prélaquées - Méthodes d'essai - Partie 23 : Résistance à des atmosphères humides contenant du dioxyde de soufre

Le présent document décrit la méthode de détermination de la résistance d’un revêtement organique appliqué sur un subjectile métallique à des atmosphères humides contenant du dioxyde de soufre.

Prevlečene kovine, ki se navijajo - Preskusne metode - 23. del: Odpornost proti vlažni atmosferi, ki vsebuje žveplov dioksid

Ta del standarda EN 13523 opisuje postopek za določanje barvne stabilnosti organske prevleke na kovinski podlagi ob izpostavljenosti vlažni atmosferi, ki vsebuje žveplov dioksid. Ta metoda je bila zasnovana za pospešeno preskušanje oz. ocenjevanje barvne obstojnosti prevlečenih kovin, ki se navijajo, v atmosferi, ki vsebuje žveplov dioksid (običajno za industrijske atmosfere).

General Information

• Status: Published
• Publication Date: 17-Oct-2023
• ICS: 17.180.20 - Colours and measurement of light
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Oct-2023
• Due Date: 14-May-2024
• Completion Date: 18-Oct-2023
• Ref Project: SIST EN 13523-23:2023 - Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide

Relations

• Replaces: EN 13523-23:2015 - Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2023
Nadomešča:
SIST EN 13523-23:2015
Prevlečene kovine, ki se navijajo - Preskusne metode - 23. del: Odpornost proti
vlažni atmosferi, ki vsebuje žveplov dioksid
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres
containing sulfur dioxide
Bandbeschichtete Metalle - Prüfverfahren - Teil 23: Beständigkeit gegen feuchte,
Schwefeldioxid enthaltende Atmosphären
Tôles prélaquées - Méthodes d'essai - Partie 23 : Résistance à des atmosphères
humides contenant du dioxyde de soufre
Ta slovenski standard je istoveten z: EN 13523-23:2023
ICS:
25.220.60 Organske prevleke Organic coatings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13523-23
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 17.180.20; 25.220.60 Supersedes EN 13523-23:2015
English Version
Coil coated metals - Test methods - Part 23: Resistance to
humid atmospheres containing sulfur dioxide
Tôles prélaquées - Méthodes d'essai - Partie 23 : Bandbeschichtete Metalle - Prüfverfahren - Teil 23:
Résistance à des atmosphères humides contenant du Beständigkeit gegen feuchte, Schwefeldioxid
dioxyde de soufre enthaltende Atmosphären
This European Standard was approved by CEN on 12 May 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13523-23:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
6 Sampling . 7
7 Test specimens . 7
8 Procedure . 7
9 Expression of results . 8
10 Precision . 8
11 Test report . 8
Bibliography . 9

European foreword
This document (EN 13523-23:2023) has been prepared by Technical Committee CEN/TC 139 “Paints and
varnishes”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13523-23:2015.
In comparison with the previous edition, the following technical modifications have been made:
a) the normative references have been updated;
b) the text has been editorially revised.
The EN 13523 series, Coil coated metals — Test methods, consists of the following parts:
— Part 0: General introduction
— Part 1: Film thickness
— Part 2: Gloss
— Part 3: Colour difference and metamerism — Instrumental comparison
— Part 4: Pencil hardness
— Part 5: Resistance to rapid deformation (impact test)
— Part 6: Adhesion after indentation (cupping test)
— Part 7: Resistance to cracking on bending (T-bend test)
— Part 8: Resistance to salt spray (fog)
— Part 9: Resistance to water immersion
— Part 10: Resistance to fluorescent UV radiation and water condensation
— Part 11: Resistance to solvents (rubbing test)
— Part 12: Resistance to scratching
— Part 13: Resistance to accelerated ageing by the use of heat
— Part 14: Chalking (Helmen method)
— Part 16: Resistance to abrasion
prEN 13523-23:2022 (E)
— Part 17: Adhesion of strippable films
— Part 18: Resistance to staining
— Part 19: Panel design and method of atmospheric exposure testing
— Part 20: Foam adhesion
— Part 21: Evaluation of outdoor exposed panels
— Part 22: Colour difference — Visual comparison
— Part 23: Resistance to humid atmospheres containing sulfur dioxide
— Part 24: Resistance to blocking and pressure marking
— Part 25: Resistance to humidity
— Part 26: Resistance to condensation of water
— Part 27: Resistance to humid poultice (Cataplasm test)
— Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European St
...