SIST EN IEC 60335-2-82:2022
(Main)Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric commercial amusement machines
and personal service machines, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances.
NOTE 101 Examples of appliances that are within the scope of this standard are
– amusement machines:
• tables;
• bowling machines;
• dartboards;
• driving simulators;
• gaming machines;
• kiddie rides;
• laser shooting appliances;
• pinball machines;
• video games;
• personal service machines;
• card re-value machines;
• currency dispensers;
• luggage lockers;
• weighing machines;
• shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by users and maintenance persons.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
– in many countries, additional requirements are specified by the national authorities responsible for health, for
the protection of labour and similar authorities.
NOTE 103 This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);
– appliances within the scope of IEC 60065, such as jukeboxes and household video games
– appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller
machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels;
– self-balancing personal transport devices.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-82: Besondere Anforderungen für Dienstleistungs- und Unterhaltungsautomaten
Appareils électrodomestiques et analogues - Sécurité - Partie 2-82: Règles particulières pour les machines de service et les machines de divertissement
L'IEC 60335-2-82:2017 traite de la sécurité des machines de divertissement électriques et des machines électriques de service pour les personnes, à usage commercial, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils.
Il est possible de citer, à titre d’exemple d'appareils compris dans le domaine d'application de la présente norme, les machines de divertissement:
- tables;
- jeux de quilles;
- fléchettes;
- simulateurs de conduite;
- machines de jeu;
- animaux ou véhicules animés pour enfants («kiddie rides»);
- jeux à laser;
- billards électriques;
- jeux vidéo;
- machines de service pour les personnes;
- machines à recharger les cartes;
- distributeurs de monnaie;
- consignes à bagages;
- balances;
- appareils à cirer les chaussures.
Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils, encourus par les utilisateurs et les agents d’entretien.
L’attention est attirée sur le fait que:
- pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires;
- dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, et par des organismes similaires.
La présente norme ne s’applique pas:
- aux appareils prévus exclusivement pour des usages domestiques;
- aux appareils prévus exclusivement pour des usages industriels;
- aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz);
- aux appareils de lavage des voitures;
- aux distributeurs avec ou sans moyen de paiement (IEC 60335-2-75);
- aux appareils entrant dans le domaine d'application de l’IEC 60065, tels que juke-boxes et jeux vidéo à usage domestique;
- aux appareils entrant dans le domaine d'application de l’IEC 60950, tels que les machines à photocopier, les distributeurs de tickets et les distributeurs de billets;
- aux appareils destinés à être utilisés en présence d’un surveillant formé, tels que les systèmes de réalité virtuelle;
- aux équipements destinés à être utilisés exclusivement dans des foires, tels que les manèges;
- aux dispositifs de transport personnel autoéquilibrés.
Cette troisième édition annule et remplace la deuxième édition parue en 2002, son Amendement 1 (2008) et son Amendement 2 (2015). Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- Il est précisé que le 22.44 n’est pas applicable aux machines de divertissement;
- Modification de certaines notes pour les transformer en texte normatif (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102).
- Une référence au 22.106 est faite à l’Annexe R.
La présente partie 2 doit être utilisée conjointement avec la dernière édition de l’IEC 60335-1 et ses amendements. Elle a été établie sur la base de la cinquième édition (2010) de cette norme.
La présente partie 2 complète ou modifie les articles correspond
Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne zahteve za naprave za razvedrilo in naprave za storitvene dejavnosti
To točko 1. dela nadomešča naslednje besedilo.
Ta mednarodni standard opisuje varnost električnih naprav za razvedrilo
in naprav za storitvene dejavnosti za komercialno uporabo, pri čemer njihova nazivna napetost ni večja od 250 V za enofazne aparate in 480 V za druge aparate.
OPOMBA 101: Primeri aparatov, ki spadajo na področje uporabe tega standarda:
– naprave za razvedrilo:
• mize;
• naprave za kegljanje;
• table za pikado;
• simulatorji vožnje;
• igralni avtomati;
• otroški vrtiljaki;
• aparati za streljanje z laserjem;
• fliper naprave;
• video igre;
• naprave za storitvene dejavnosti;
• naprave za polnjenje kartic;
• avtomati za izdajanje valut;
• omarice za prtljago;
• naprave za tehtanje;
• aparati za loščenje čevljev.
Ta standard v največji možni meri obravnava splošne nevarnosti, ki jih predstavljajo
aparati ter s katerimi se srečujejo uporabniki in vzdrževalno osebje.
OPOMBA 102: Opozoriti je treba, da:
– so za aparate, ki so namenjeni za uporabo v vozilih ali na krovu ladij ali letal, morda potrebne dodatne
zahteve;
– v številnih državah nacionalni organi, odgovorni za zdravje in
varstvo pri delu, ter drugi podobni organi določajo dodatne zahteve.
OPOMBA 103: Ta standard se ne uporablja za:
– aparate za izključno gospodinjsko uporabo;
– aparate za izključno industrijske namene;
– aparate, ki so namenjeni za uporabo na lokacijah, kjer veljajo posebne razmere, kot je prisotnost
korozivne ali eksplozivne atmosfere (prah, hlapi ali plin);
– aparate za pranje avtomobilov;
– aparate za prodajo hrane in pijače ter prodajne avtomate (IEC 60335-2-75);
– aparate, ki spadajo na področje uporabe standarda IEC 60065 (npr. glasbeni avtomati, video igre za domačo uporabo);
– aparate, ki spadajo na področje uporabe standarda IEC 60950-1 (npr. kopirni stroji, avtomati za prodajo vstopnic, bančni
avtomati);
– aparate, ki so namenjeni za uporabo ob prisotnosti usposobljenega upravljavca (npr. sistemi navidezne resničnosti);
– opremo, ki je namenjena uporabi izključno na sejmiščih (npr. vrtiljaki);
– naprave za prevoz oseb s samodejnim uravnavanjem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60335-2-82:2022
01-maj-2022
Nadomešča:
SIST EN 60335-2-82:2003
SIST EN 60335-2-82:2003/A1:2008
SIST EN 60335-2-82:2003/A2:2020
Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne zahteve
za naprave za razvedrilo in naprave za storitvene dejavnosti
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements
for amusement machines and personal service machines
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-82:
Besondere Anforderungen für Dienstleistungs- und Unterhaltungsautomaten
Appareils électrodomestiques et analogues - Sécurité - Partie 2-82: Règles particulières
pour les machines de service et les machines de divertissement
Ta slovenski standard je istoveten z: EN IEC 60335-2-82:2022
ICS:
97.180 Razna oprema za dom in Miscellaneous domestic and
trgovino commercial equipment
97.200.99 Druga oprema za razvedrilo Other equipment for
entertainment
SIST EN IEC 60335-2-82:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60335-2-82:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 60335-2-82:2022
EUROPEAN STANDARD EN IEC 60335-2-82
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 97.180; 97.200.40 Supersedes EN 60335-2-82:2003 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-82:
Particular requirements for amusement machines and personal
service machines
(IEC 60335-2-82:2017)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-82: Règles particulières pour les machines de ähnliche Zwecke - Teil 2-82: Besondere Anforderungen für
service et les machines de divertissement Dienstleistungs- und Unterhaltungsautomaten
(IEC 60335-2-82:2017) (IEC 60335-2-82:2017)
This European Standard was approved by CENELEC on 2017-11-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-82:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60335-2-82:2022
EN IEC 60335-2-82:2022 (E)
European foreword
The text of document (61/5293/CDV), future edition 3 of IEC 60335-2-82, prepared by IEC/TC 61
“Safety of household and similar electrical appliances” was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 60335-2-82:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025–03–25
document have to be withdrawn
This document supersedes EN 60335-2-82:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-82:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60335-2-75 NOTE Harmonized as EN 60335-2-75
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60335-2-82:2022
EN IEC 60335-2-82:2022 (E)
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZC of EN 60335-1:2012 applies, except as follows:
Publication Year Title EN/HD Year
Addition
IEC 60068-2-52 1996 Environmental testing - Part 2-52: Tests - EN 60068-2-52 1996
Test Kb: Salt mist, cyclic (sodium chloride
solution)
IEC 62368-1 - Audio/video, information and EN IEC 62368-1 -
communication technology equipment -
Part 1: Safety requirements
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60335-2-82:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 60335-2-82:2022
IEC 60335-2-82
®
Edition 3.0 2017-10
INTERNATIONAL
STANDARD
Household and similar electrical appliances – Safety –
Part 2-82: Particular requirements for amusement machines and personal
service machines
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 97.180, 97.200.40 ISBN 978-2-8322-4871-3
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN IEC 60335-2-82:2022
– 2 – IEC 60335-2-82:2017 IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 9
7 Marking and instructions . 9
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Void . 11
13 Leakage current and electric strength at operating temperature . 11
14 Transient overvoltages . 11
15 Moisture resistance . 11
16 Leakage current and electric strength . 12
17 Overload protection of transformers and associated circuits . 12
18 Endurance . 12
19 Abnormal operation . 12
20 Stability and mechanical hazards . 14
21 Mechanical strength . 14
22 Construction . 14
23 Internal wiring . 15
24 Components . 16
25 Supply connection and external flexible cords . 17
26 Terminals for external conductors . 17
27 Provision for earthing . 17
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 18
31 Resistance to rusting . 18
32 Radiation, toxicity and similar hazards . 18
Annexes . 19
Bibliography . 20
---------------------- Page: 8 ----------------------
SIST EN IEC 60335-2-82:2022
IEC 60335-2-82:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-82: Particular requirements for amusement machines
and personal service machines
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60335-2-82 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
This third edition cancels and replaces the second edition published in 2002 including its
Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical
revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– It is clarified that 22.44 is not applicable to amusement machines;
– Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102,
15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102).
– Reference to 22.106 is made in Annex R.
---------------------- Page: 9 ----------------------
SIST EN IEC 60335-2-82:2022
– 4 – IEC 60335-2-82:2017 IEC 2017
The text of this International Standard is based on the following documents:
CDV Report on voting
61/5293/CDV 61/5379A/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fifth edition (2010) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for amusement machines
and personal service machines.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
---------------------- Page: 10 ----------------------
SIST EN IEC 60335-2-82:2022
IEC 60335-2-82:2017 © IEC 2017 – 5 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer's instructions. It also covers abnormal
situations that can be expected in practice and takes into account the way in which
electromagnetic phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into
consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of
the requirements and, if found to be substantially equivalent, may be considered to comply
with the standard.
---------------------- Page: 11 ----------------------
SIST EN IEC 60335-2-82:2022
– 6 – IEC 60335-2-82:2017 IEC 2017
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-82: Particular requirements for amusement machines
and personal service machines
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric commercial amusement machines
and personal service machines, their rated voltage being not more than 250 V for single-
phase appliances and 480 V for other appliances.
NOTE 101 Examples of appliances that are within the scope of this standard are
– amusement machines:
• tables;
• bowling machines;
• dartboards;
• driving simulators;
• gaming machines;
• kiddie rides;
• laser shooting appliances;
• pinball machines;
• video games;
• personal service machines;
• card re-value machines;
• currency dispensers;
• luggage lockers;
• weighing machines;
• shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by users and maintenance persons.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
– in many countries, additional requirements are specified by the national authorities responsible for health, for
the protection of labour and similar authorities.
NOTE 103 This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);
– appliances within the scope of IEC 60065, such as jukeboxes and household video games;
---------------------- Page: 12 ----------------------
SIST EN IEC 60335-2-82:2022
IEC 60335-2-82:2017 © IEC 2017 – 7 –
– appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller
machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels;
– self-balancing personal transport devices.
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-52:1996, Environmental testing – Part 2: Tests – Test Kb: Salt mist, cyclic
(sodium, chloride solution)
IEC 62368-1, Audio/video, information and communication technology equipment – Part 1:
Safety requirements
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.1.9 Replacement:
normal operation
operation of the appliance under the following conditions
The appliance is operated in the stand-by mode until steady conditions are established and
then under the most unfavourable conditions of normal use.
The appliance is refilled when necessary in accordance with the instructions for use, or the
instructions for maintenance, and the next operating period started as soon as possible.
Appliances that support persons in normal use are loaded as follows:
– kiddie rides, 50 kg for each riding position;
– other appliances, 100 kg for the first riding position and 75 kg for each additional riding
position.
Note 1 to entry: The riding position may be for a sitting or standing person.
If the instructions state that higher loads are allowed, the appliance is loaded accordingly.
Audio amplifiers are operated in accordance with the normal operating conditions specified in
IEC 60065.
3.5.101
kiddie ride
moving appliance having a stationary base for use by one or two children between the ages of
three and ten years, under the supervision of an adult
3.6.2 Replacement:
detachable part
part that can be removed without the aid of a tool, part that is removed in accordance with the
instructions for use or instructions for maintenance, even if a tool or access key is needed
for removal, or part that does not fulfil the test of 22.11
---------------------- Page: 13 ----------------------
SIST EN IEC 60335-2-82:2022
– 8 – IEC 60335-2-82:2017 IEC 2017
Note 1 to entry: If a part has to be removed for installation purposes, this part is not considered to be detachable
even if the instructions state that it is to be removed.
Note 2 to entry: A part that can be opened is considered to be a part that can be removed.
3.6.101
access key
key or other means that gives access to the maintenance area but does not give access to
the service area
Note 1 to entry: "Other means” includes a tool or operation by codes or signals produced by optical or
electromagnetic sources.
3.6.102
override key
key or other means that is used to render an interlock inoperative
3.6.103
user area
area where access is gained without the use of an access key or a tool
3.6.104
maintenance area
area where access can only be gained by the use of an access key
3.6.105
service area
area where access cannot be gained by the use of an access key alone
3.7.3 Replacement:
thermal cut-out
device that during abnormal operation limits the temperature of the controlled part by
automatically opening the circuit, or reducing the current, and constructed so that its setting
cannot be altered by the user or the maintenance person
3.8.5 Replacement:
maintenance operation
operation that the user or maintenance person is intended to perform as stated in the
instructions for use, or the instructions for maintenance, or as marked on the appliance
Note 1 to entry: The instructions for maintenance marked on the appliance, or supplied with the appliance or
subsequently, are applicable only to the user area and the maintenance area.
Note 2 to entry: Maintenance operation includes preparing and commissioning the appliance for new operating
methods. It does not include operations that are to be performed in the service area.
3.8.101
instructions for maintenance
instructions explaining how to carry out cleaning, replenishing, coin collecting, setting of
controls and similar operations
3.8.102
maintenance person
person who maintains the appliance in accordance with the instructions for maintenance
3.8.103
stand-by mode
mode of the appliance when it is energized and ready for use, while filled as intended but with
empty cash boxes
---------------------- Page: 14 ----------------------
SIST EN IEC 60335-2-82:2022
IEC 60335-2-82:2017 © IEC 2017 – 9 –
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.6 Replacement:
Controls or switching devices in the user area are adjusted to the most unfavourable setting.
Controls, switching devices or other parts in the maintenance area are adjusted to the most
unfavourable setting within the limits stated in the instructions for maintenance; however,
controls or switching devices in the service area are not adjusted.
5.9 Addition:
When alternative software is made available by the appliance manufacturer, the appliance is
tested with the software that gives the most unfavourable results.
5.101 The requirements of this standard for the maintenance area are applicable when the
instructions for maintenance are being followed. If an override key is provided for access
to the maintenance area, it is used before a test is carried out if this is more unfavourable.
5.102 When reference is made to the application of test probe B, test probe 18 of IEC 61032
is also applied in the user area.
5.103 Appliances incorporating transformers, electronic circuits and lamps are tested as
motor-operated appliances unless they incorporate a heat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.