SIST EN ISO 29470:2020
(Main)Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)
Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)
This Standard is applicable to full size thermal insulating products and test specimens. This standard can also be applied to the individual layers of multi layered products. It specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Rohdichte (ISO 29470:2020)
Dieses Dokument legt Prüfeinrichtungen und Verfahren zur Bestimmung der Rohdichte und der Kern-Rohdichte unter Bezugsbedingungen fest. Dieses Dokument gilt für Wärmedämmstoffe in Liefermaßen und Probekörper. Dieses Dokument kann auch für die einzelnen Schichten von mehrschichtigen Produkten verwendet werden.
Produits isolants thermiques destinés aux applications du bâtiment -- Détermination de la masse volumique apparente (ISO 29470:2020)
Le présent document spécifie l'équipement et les modes opératoires permettant de déterminer la masse volumique globale apparente et la masse volumique apparente à cœur, dans des conditions de référence. Le présent document s'applique aux produits isolants thermiques en vraies dimensions et à leurs éprouvettes d'essai. Le présent document peut également s'appliquer à chacune des couches d'un produit multicouche.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje prostorninske mase (ISO 29470:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 29470:2020
01-oktober-2020
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje
prostorninske mase (ISO 29470:2020)
Thermal insulating products for building applications - Determination of the apparent
density (ISO 29470:2020)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Rohdichte (ISO 29470:2020)
Produits isolants thermiques destinés aux applications du bâtiment -- Détermination de
la masse volumique apparente (ISO 29470:2020)
Ta slovenski standard je istoveten z: EN ISO 29470:2020
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 29470:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 29470:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 29470:2020
EN ISO 29470
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 91.100.60
English Version
Thermal insulating products for building applications -
Determination of the apparent density (ISO 29470:2020)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la masse volumique der Rohdichte (ISO 29470:2020)
apparente (ISO 29470:2020)
This European Standard was approved by CEN on 21 June 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29470:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 29470:2020
EN ISO 29470:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 29470:2020
EN ISO 29470:2020 (E)
European foreword
This document (EN ISO 29470:2020) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 29470:2020 has been approved by CEN as EN ISO 29470:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 29470:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 29470:2020
INTERNATIONAL ISO
STANDARD 29470
Second edition
2020-06
Thermal insulating products
for building applications —
Determination of the apparent density
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination de la masse volumique apparente
Reference number
ISO 29470:2020(E)
©
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 29470:2020
ISO 29470:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 29470:2020
ISO 29470:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens. 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 2
6.3 Preparation of test specimens . 2
6.4 Conditioning of test specimens . 2
7 Procedure. 3
7.1 Test conditions . 3
7.2 Test procedure . 3
8 Calculation and expression of results . 3
9 Test report . 3
© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 29470:2020
ISO 29470:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO docum
...
SLOVENSKI STANDARD
oSIST prEN ISO 29470:2019
01-maj-2019
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje
prostorninske mase (ISO/DIS 29470:2019)
Thermal insulating products for building applications - Determination of the apparent
density (ISO/DIS 29470:2019)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Rohdichte (ISO/DIS
29470:2019)
Produits isolants thermiques destinés aux applications du bâtiment -- Détermination de la
masse volumique apparente (ISO/DIS 29470:2019)
Ta slovenski standard je istoveten z: prEN ISO 29470
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN ISO 29470:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 29470:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 29470:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29470
ISO/TC 163/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-03-19 2019-06-11
Thermal insulating products for building applications —
Determination of the apparent density
Produits isolants thermiques destinés aux applications du bâtiment — Détermination de la masse
volumique apparente
ICS: 91.100.60
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 29470:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 29470:2019
ISO/DIS 29470:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 29470:2019
ISO/DIS 29470:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens. 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 2
6.3 Preparation of test specimens . 2
6.4 Conditioning of test specimens . 2
7 Procedure. 3
7.1 Test conditions . 3
7.2 Test procedure . 3
8 Calculation and expression of results . 3
9 Accuracy of the measurement . 3
10 Test report . 4
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 29470:2019
ISO/DIS 29470:2019(E)
Foreword
This EN ISO/FDIS 29470 includes the original EN 1602:1996 and EN 1602:1996/AC: 1997 test methods
prepared by Technical Committee CEN/TC 88 "Thermal insulating materials and products" in
cooperation with ISO TC 61 SC 10 and under the CEN lead by CEN TC 88 WG 1, being modified in the
following chapters:
Clause 6.4 conditioning of test specimen;
Clause 7.1 test conditions and
Clause 10 test report
to reflect the conditions for tropical countries.
The standard also includes the ISO 845 as published by ISO TCX 61 SC 10. The standard is identical to
the technical content of EN 1602.
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
This ISO/FDIS 29470 is one of a series of existing European Standards on test methods which shall be
adopted by ISO. This "package" of standards comprises the following group of interrelated standards:
ISO/FDIS Title respective
EN standard
12344 Thermal insulating products for building applications - Determination of EN 12089
bending behaviour
12968 Thermal insulation products for building applications - Determination of EN 13495
the pull-off resistance of external thermal insulation composite systems
(ETICS) (foam block test)
29465 Thermal insulating products for building applications - Determination of EN 822
length and width
29466 Thermal insulating products for building applications - Determination of EN 823
thickness
29467 Thermal insulating products for building applications - Determination of EN 824
squareness
29468 Thermal insulating products for building applications - Determination of EN 825
flatness
iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 29470:2019
ISO/DIS 29470:2019(E)
29469 Thermal insulating products for building applications - Determination of EN 826
compression behaviour
29470 Thermal insulating products for building applications - Determination of EN 1602
the apparent density
29471 Thermal insulating products for building applications - Determination EN 1603
of dimensional stability under constant normal laboratory conditions
(23°C/50 % relative humidity)
29472 Thermal insulating products for building applications - Determination of EN 1604
dimensional stability under specified temperature and humidity conditions
29764 Thermal insulating products for building applications - Determination of EN 1605
deformation under specified compressive load and temperature conditions
29765 Thermal insulating products for building applications - Determination of EN 1607
tensile strength perpendicular to faces
29766 Thermal insulating products for building applications - Determination of EN 1608
tensile strength parallel to faces
29767 Thermal insulating products for building applications - Determination of EN 1609
short term water absorption by partial immersion
29768 Thermal insulating products for building applications - Determination of EN 12085
linear dimensions of test specimens
29769 Thermal insulating products for building applications - Determination of EN 12430
behaviour under point load
29770 Thermal insulating products for building applications_- Determination of EN 12431
thickness for floating floor insulating products
29771 Thermal insulating materials for building applications - Determination of EN 13820
organic content
29803 Thermal insulation products for building applications_- Determination EN 13497
of the resistance to impact of external thermal insulation composite sys-
tems (ETICS)
29804 Thermal insulation products for buil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.