iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1710:2006+A1:2008/AC:2010

(Corrigendum)

Equipment and components intended for use in potentially explosive atmospheres in underground mines

Equipment and components intended for use in potentially explosive atmospheres in underground mines

TC - Correction to the English version only in Subclause 6.2.

Geräte und Komponenten für den Einsatz in schlagwettergefährdeten Bereichen von untertägigen Bergwerken

Appareils et composants destinés à être utilisés dans les mines souterraines grisouteuses

Oprema in komponente, namenjene za uporabo v potencialno eksplozivnih atmosferah v podzemnih rudnikih

Ta evropski standard določa zahteve za varovanje pred eksplozijami pri izgradnji in označevanju opreme, ki je lahko posamezni predmet ali konstrukcija.  To vključuje stroje in komponente, dane na trg s strani posameznega dobavitelja za uporabo v rudnikih, dovzetnih za eksplozivne atmosfere zaradi jamskega plina in/ali gorljivega prahu (pri atmosferskih pogojih, kot so opredeljeni v EN 1127-2).

General Information

Status
Withdrawn
Publication Date
13-Sep-2010
Withdrawal Date
21-Mar-2017
ICS
73.100.30 - Equipment for drilling and mine excavation
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Jan-2017
Due Date
26-Jan-2017
Completion Date
22-Mar-2017
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
98/37/EC - Machinery
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 1710:2005+A1:2008/AC:2010 - Equipment and components intended for use in potentially explosive atmospheres in underground mines

Relations

Corrects
SIST EN 1710:2006+A1:2008 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
Effective Date
01-Oct-2010
Replaced By
SIST EN ISO/IEC 80079-38:2017 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
Effective Date
28-Dec-2016
Corrects
SIST EN 1710:2006+A1:2008 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
Effective Date
08-Jun-2022

Buy Standard

EN 1710:2006+A1:2008/AC:2010EN 1710:2006+A1:2008/AC:2010
PreviousNext
Corrigendum
EN 1710:2006+A1:2008/AC:2010
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema in komponente, namenjene za uporabo v potencialno eksplozivnih atmosferah v podzemnih rudnikihGeräte und Komponenten für den Einsatz in schlagwettergefährdeten Bereichen von untertägigen BergwerkenAppareils et composants destinés à être utilisés dans les mines souterraines grisouteusesEquipment and components intended for use in potentially explosive atmospheres in underground mines73.100.30Oprema za vrtanje in izkopavanjeEquipment for drilling and mine excavationICS:Ta slovenski standard je istoveten z:EN 1710:2005+A1:2008/AC:2010SIST EN 1710:2006+A1:2008/AC:2010en01-oktober-2010SIST EN 1710:2006+A1:2008/AC:2010SLOVENSKI
STANDARD



SIST EN 1710:2006+A1:2008/AC:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1710:2005+A1:2008/AC
August 2010
Août 2010
August 2010 ICS 73.100.30 English version Version Française Deutsche Fassung
Equipment and components intended for use in potentially explosive atmospheres in underground mines
Appareils et composants destinés à être utilisés dans les mines souterraines grisouteuses
Geräte und Komponent
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO/IEC 80079-38:2017/A1:2018(Amendment)
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016/A1:2018

2018-05-03 CV: CEN BT C218/2017 - decision: new Annex ZA to be published as amendment prior to offer EN ISO/IEC 80079-39:2016 + amd for citation in the OJEU

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 80079-38:2017(Main)
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016

This International Standard specifies the explosion protection requirements for the design, construction, assessment and information for use (maintenance, repair, marking) of equipment that may be an individual item or form an assembly. This
includes machinery and components placed on the market by a single supplier for use in mines susceptible to explosive atmospheres of firedamp and/or combustible dust. The standard atmospheric conditions (relating to the explosion characteristics
of the atmosphere) under which it may be assumed that equipment can be operated are:
 temperature -20 °C to +60 °C;
 pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and
 air with normal oxygen content, typically 21 % v/v.
This International Standard applies for equipment and components according to EPL Mb to be used in explosive atmospheres containing firedamp and/or combustible dust.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19225:2018/A1:2020(Amendment)
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019)
EN ISO 19225:2017/A1:2019

2019-09-17 JF: TC request for the editorial change in Annex ZA to adress the Consultant's comment
2019-03-19 The Enquiry draft of the standard had not been submitted for the assessment. In February, the TC provided a detailed Annex ZA  in line with the general EC request. CCMC requested the missing assessment on 2019-03-19. The indicative deadline to receive it is 2019-04-24.

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 80079-38:2017/A1:2018(Amendment)
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016/A1:2018

2018-05-03 CV: CEN BT C218/2017 - decision: new Annex ZA to be published as amendment prior to offer EN ISO/IEC 80079-39:2016 + amd for citation in the OJEU

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19225:2018(Main)
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
EN ISO 19225:2017

This European Standard specifies safety requirements which shall be met to minimize the hazards
listed in clause 4 that may occur during the assembly, use, maintenance, repair, decommissioning,
disassembly and disposal of shearer loaders and plough systems when operated in accordance with the
manufacturer’s requirements in underground mining.
The machines work with tools for cutting minerals such as coal, ore, salt and surrounding rock, at a fixed or
variable height and are guided on armoured face conveyors or their attachments. Shearer loaders have builtin
haulage systems. They may be directly operated by one or more drivers or be remotely or program
controlled. Plough systems are remotely controlled. Wireless remote control systems of shearer loaders are
used in the immediate environment of the machines.
This European Standard does not cover any hazards resulting from the electrical equipment
associated with the machine. It does not contain any requirements relating to firedamp hazards.
NOTE For explosive atmospheres see ISO/IEC 80079-38.
It does not cover face conveyors, spill plates and auxiliary devices such as lasers etc.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 80079-38:2017(Main)
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016

This International Standard specifies the explosion protection requirements for the design, construction, assessment and information for use (maintenance, repair, marking) of equipment that may be an individual item or form an assembly. This
includes machinery and components placed on the market by a single supplier for use in mines susceptible to explosive atmospheres of firedamp and/or combustible dust. The standard atmospheric conditions (relating to the explosion characteristics
of the atmosphere) under which it may be assumed that equipment can be operated are:
 temperature -20 °C to +60 °C;
 pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and
 air with normal oxygen content, typically 21 % v/v.
This International Standard applies for equipment and components according to EPL Mb to be used in explosive atmospheres containing firedamp and/or combustible dust.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 10097-1:2001(Main)
Wireline diamond core drilling equipment -- System A -- Part 1: Metric units
ISO 10097-1:1999

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability
of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to
63 mm in diameter.
The equipment is illustrated in Figure 1 and comprises the following:
a) core bit;
b) reaming shell;
c) core lifter;
d) core lifter case;
e) outer tube;
f) inner tube;
g) drill rod (smooth pipe only).

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 10097-2:2001(Main)
Wireline diamond core drilling equipment -- System A -- Part 2: Inch units
ISO 10097-2:1999

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability
of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of
diameter 1,063 in to 2,500 in.
The equipment is illustrated in Figure 1 and comprises the following:
a) core bit;
b) reaming shell;
c) core lifter;
d) core lifter case;
e) outer tube;
f) inner tube;
g) drill rod (smooth pipe only).

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 3552-2:2000(Main)
Rotary core diamond drilling equipment -- System B -- Part 2: Inch units
ISO 3552-2:1992

Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system B of the following equipment: drill rods and couplings, fishing rods and couplings; casing tubes, casing drive shoes, casing shoe bits, casing bits and sediment tubes; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.42 in to 5.74 in and yielding cores from 0.87 in to 4.72 in in diameter.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    43 pages
    French language
    sale 15% off
  • Standard
    43 pages
    French language
    sale 15% off
SIST
SIST ISO 8866 TC 1:2000(Main)
Rotary core diamond drilling equipment - System C - Technical corrigendum 1
ISO 8866:1991/Cor 1:1991

Figure 13: change the value for the dimension D for type M(DM)59C from 49 to 44,3. Figure 30: change the value for the dimension Dx for type DP76C from 75 to 76.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day