SIST EN 10079:1995
(Main)Definition of steel products
Definition of steel products
Defintition of steel products according to : a) their shape and dimensions b) their appearance and surface condition
Begriffsbestimmungen für Stahlerzeugnisse
Diese Europäische Norm hat den Zweck, die Stahlerzeugnisse nach a) ihren Formen und Massen, b) ihrem Aussehen und Oberflächenzustand zu beschreiben.
Définition des produits en acier
La présente norme européenne a pour but de définir les produits en acier, d'après: a) leur forme et leurs dimensions, b) leur aspect et leur état de surface
Definicije jeklenih izdelkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1995
Definicije jeklenih izdelkov
Definition of steel products
Begriffsbestimmungen für Stahlerzeugnisse
Définition des produits en acier
Ta slovenski standard je istoveten z: EN 10079:1992
ICS:
01.040.77 Metalurgija (Slovarji) Metallurg
...
This May Also Interest You
This European Standard defines terms for steel products according to:
a) shape and dimensions; and
b) appearance and surface condition.
NOTE 1 Although the products are generally defined independently of their end uses or manufacturing processes, it has sometimes been necessary to make reference to these criteria.
NOTE 2 All dimensions given in this European Standard are nominal.
- Standard44 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard defines terms for steel products according to:
a) shape and dimensions; and
b) appearance and surface condition.
NOTE 1 Although the products are generally defined independently of their end uses or manufacturing processes, it has sometimes been necessary to make reference to these criteria.
NOTE 2 All dimensions given in this European Standard are nominal.
- Standard44 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 61558-2-20:2022 is available as IEC 61558-2-20:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61558-2-20:2022 deals with the safety of small reactors for general applications. Small reactors incorporating electronic circuits are also covered by this document. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- adjustment of structure and references in accordance with IEC 61558-1:2017.
- additional Annex AA with references for characteristic parameter measurements.
- additional Annex BB for associated reactors with frequencies above 500 Hz.
- additional Annex CC for partial discharge.
It has the status of a group safety publication in accordance with IEC Guide 104.
- Standard25 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Apr-2022
- 06-Apr-2025
- 29.180
- 2014/35/EU
- M/511
- I96
- Amendment6 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 63522-11:2025 is used for testing electrical relay enclosures along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines standard test methods for appropriate enclosure sealing testing.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 31-Oct-2023
- 03-Apr-2025
- 29.120.70
- ISS EIT.ERE
This document specifies general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
- Standard12 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 61558-2-6:2021 is available as IEC 61558-2-6:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61558-2-6:2021 deals with the safety of safety isolating transformers for general applications and power supply units incorporating safety isolating transformers for general applications. Transformers incorporating electronic circuits are also covered by this document. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision.
- adjustment of structure and references in accordance with IEC 61558-1:2017;
- description of constructions moved in IEC 61558-1:2017;
- new symbol for power supply unit with linearly regulated output voltage.
It has the status of a group safety publication in accordance with IEC Guide 104.
This International Standard is to be used in conjunction with IEC 61558-1:2017.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 03-Apr-2025
- 29.180
- 2014/35/EU
- I96
This document (CEN/TS 12697 51:2025) specifies a test method for measuring the surface shear strength for airfield surface courses.
The surface shear strength will depend on the depth of the surface course together with the properties of the surface course material.
The binder course material and any bonding agent applied between the two layers can have an influence on the test result for, in particular, ultra-thin surface course.
- Technical specification15 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of IEC 61558 deals with the safety of control transformers and power supply units incorporating control transformers. Transformers incorporating electronic circuits are also covered by this document.
NOTE 1 Safety includes electrical, thermal and mechanical aspects.
Unless otherwise specified, from here onward, the term transformer covers control transformers and power supply units incorporating control transformers.
For power supply units (linear) this document is applicable. For switch mode power supply units IEC 61558-2-16 is applicable together with this document. Where two requirements are in conflict, the most severe take precedence.
This document does not apply to transformers covered by IEC 60076-11.
This document is applicable to stationary or portable, single-phase or polyphase, air-cooled (natural or forced) independent or associated dry- type transformers. The windings can be encapsulated or non-encapsulated.
The rated supply voltage does not exceed 1 000 V AC and the rated supply frequency and the internal operating frequencies do not exceed 500 Hz.
The rated thermal output does not exceed:
- 25 kVA for single-phase transformers,
- 40 kVA for polyphase transformers;
This document is applicable to transformers without limitation of the rated thermal output, subject to an agreement between the purchaser and the manufacturer.
NOTE 2 Transformers intended to supply distribution networks are not included in the scope.
The no-load output voltage or the rated output voltage does not exceed 1 000 V AC or 1 415 V ripple-free DC. For independent transformers the no-load output voltage and / or the rated output voltage is not less than 50 V AC or 120 V ripple-free DC.
This document is not applicable to external circuits and their components intended to be connected to the input terminals and output terminals of the transformers.
NOTE 3 Transformers covered by this document are only used in applications where double or reinforced insulation between circuits is not required by the installation rules or by the end product standard.
NOTE 4 Normally the control transformers are intended to be used with equipment to provide voltages different from the supply voltage for the functional requirements of the equipment. The protection against electric shock may be provided or completed by other features of the equipment, such as the body. Parts of output circuits may be connected to the input circuits or to protective earthing.
Attention is drawn to the following:
- for transformers intended to be used in vehicles, on board ships, and aircraft, additional requirements (from other applicable standards, national rules, etc.);
- measures to protect the enclosure and the components inside the enclosure against external influences such as fungus, vermin, termites, solar-radiation, and icing;
- the different conditions for transportation, storage, and operation of the transformers;
- additional requirements in accordance with other appropriate standards and national rules may be applicable to transformers intended for use in special environments.
Future technological development of transformers may necessitate a need to increase the upper limit of the frequencies. Until then this document may be used as a guidance document.
This GROUP SAFETY PUBLICATION focusing on SAFETY guidance is primarily intended to be used as a PRODUCT SAFETY STANDARD for the products mentioned in the scope, but is also intended to be used by TCs in the preparation of publications for products similar to those mentioned in the scope of this GROUP SAFETY PUBLICATION, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
One of the RESPONSIBILITIES of a TC is, wherever applicable, to make use of BSPs and/or GSPs in the preparation of its publications.
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
- 29-Nov-2021
- 03-Apr-2025
- 29.180
- 2014/35/EU
- I96
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.