Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products (IEC 60695-4:2021)

The terms and definitions in this part of IEC 60695 are applicable to fire tests for
electrotechnical products.
This basic safety publication focusing on safety guidance is primarily intended for use by
technical committees in the preparation of safety publications in accordance with the
principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications. The requirements, test
methods or test conditions of this basic safety publication will not apply unless specifically
referred to or included in the relevant publications.

Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen elektrotechnischer Produkte (IEC 60695-4:2021)

Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour les produits électrotechniques (IEC 60695-4:2021)

IEC 60695-4:2021 est disponible sous forme de IEC 60695-4:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 60695-4:2021 Les termes et définitions définis dans la présente partie de l'IEC 60695 sont applicables aux essais au feu pour les produits électrotechniques. La présente publication fondamentale de sécurité portant sur des recommandations de sécurité est avant tout destinée à être utilisée par les comités d’études dans le cadre de l'élaboration de publications de sécurité, conformément aux principes établis dans le Guide IEC 104 et le Guide ISO/IEC 51. L’une des responsabilités d’un comité d’études consiste, le cas échéant, à utiliser les publications fondamentales de sécurité dans le cadre de l’élaboration de ses publications. Les exigences, méthodes d’essai ou conditions d’essai de cette publication fondamentale de sécurité ne s’appliquent pas, sauf si elles sont spécifiquement citées en référence ou incluses dans les publications correspondantes. Cette cinquième édition annule et remplace la quatrième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Les termes et définitions qui ne concernent pas spécifiquement l'électrotechnique et qui sont soit identiques soit équivalents à ceux de l'ISO 13943:2017 ont été supprimés. b) Les termes et définitions qui sont spécifiquement électrotechniques et qui figurent dans l'ISO 13943:2017 ont été inclus dans un souci de commodité pour l'utilisateur. Elle a le statut d’une publication fondamentale de sécurité conformément au Guide IEC 104 et au Guide ISO/IEC 51.

Preskušanje požarne ogroženosti - 4. del: Izrazje v zvezi s požarnimi preskusi elektrotehničnih proizvodov (IEC 60695-4:2021)

General Information

Status
Published
Publication Date
22-Aug-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Aug-2021
Due Date
23-Oct-2021
Completion Date
23-Aug-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 60695-4:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60695-4:2021
01-oktober-2021
Nadomešča:
SIST EN 60695-4:2012
Preskušanje požarne ogroženosti - 4. del: Izrazje v zvezi s požarnimi preskusi
elektrotehničnih proizvodov (IEC 60695-4:2021)

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical

products (IEC 60695-4:2021)

Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen

elektrotechnischer Produkte (IEC 60695-4:2021)

Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour

les produits électrotechniques (IEC 60695-4:2021)
Ta slovenski standard je istoveten z: EN IEC 60695-4:2021
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN IEC 60695-4:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60695-4:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60695-4:2021
EUROPEAN STANDARD EN IEC 60695-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 01.040.13; 29.020 Supersedes EN 60695-4:2012 and all of its amendments
and corrigenda (if any)
English Version
Fire hazard testing - Part 4: Terminology concerning fire tests for
electrotechnical products
(IEC 60695-4:2021)

Essais relatifs aux risques du feu - Partie 4: Terminologie Prüfungen zur Beurteilung der Brandgefahr - Teil 4:

relative aux essais au feu pour les produits Terminologie der Brandprüfungen elektrotechnischer

électrotechniques Produkte
(IEC 60695-4:2021) (IEC 60695-4:2021)

This European Standard was approved by CENELEC on 2021-07-28. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60695-4:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60695-4:2021
EN IEC 60695-4:2021 (E)
European foreword

The text of document 89/1462/CDV, future edition 5 of IEC 60695-4, prepared by IEC/TC 89 “Fire

hazard testing” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

EN IEC 60695-4:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2022–04–28

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2024–07–28

document have to be withdrawn

This document supersedes EN 60695-4:2012 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 60695-4:2021 was approved by CENELEC as a European

Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN IEC 60695-4:2021
EN IEC 60695-4:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical Vocabulary - -
IEC Guide 104 - The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO 13943 2017 Fire safety - Vocabulary EN ISO 13943 2017
ISO/IEC Guide 51 - Safety aspects - Guidelines for their - -
inclusion in standards
---------------------- Page: 5 ----------------------
SIST EN IEC 60695-4:2021
---------------------- Page: 6 ----------------------
SIST EN IEC 60695-4:2021
IEC 60695-4
Edition 5.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fire hazard testing –
Part 4: Terminology concerning fire tests for electrotechnical products
Essais relatifs aux risques du feu –
Partie 4: Terminologie relative aux essais au feu pour les produits
électrotechniques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.040.13; 29.020 ISBN 978-2-8322-9906-7

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60695-4:2021
– 2 – IEC 60695-4:2021 © IEC 2021
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

3.1 Use of the term “item” ............................................................................................. 5

3.2 Other terms and definitions ..................................................................................... 5

---------------------- Page: 8 ----------------------
SIST EN IEC 60695-4:2021
IEC 60695-4:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIRE HAZARD TESTING –
Part 4: Terminology concerning fire tests
for electrotechnical products
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whats
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.