iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 549:1996

(Main)

Rubber materials for seals and diaphragms for gas appliances and gas equipment

Rubber materials for seals and diaphragms for gas appliances and gas equipment

This standard specifies requirements and associated test methods for vulcanized rubber materials used in gas appliances and equipment in contact with 1st, 2nd and 3rd family combustible gases. It also establishes a classification based on temperature range and hardness. This standard is applicable to materials from which are manufactured homogeneous seals and homogeneous or reinforced diaphragms.  The normal range of operating temperatures covered by this standard is 0 oC to + 60 oC. Tests are also included for applications using diaphragms within the range - 20 oC to + 80 oC and seals within the range - 20 oC to + 150 oC. For temperatures outside these ranges the user should contact the manufacturer regarding the suitability of the rubber material.  This standard includes two normative annexes for the verification that a component (finished product) was produced from a previously type tested material complying with requirements of this standard as declared by the appliance or equipment manufacturer or supplier of the component.  This standard is not applicable to silicone rubber used either above 200 mbar nominal pressure or at temperatures below 0 oC with 3rd family gases as there is possibility of condensation. This standard is also not applicable to seals and diaphragms for devices in gas transmission systems nor in such equipment used in 1st and 2nd family gas distribution systems.

Elastomer-Werkstoffe für Dichtungen und Membranen in Gasgeräten und Gasanlagen

Diese Norm legt Anforderungen und zugehörige Prüfverfahren für vulkanisierte Elastomer-Werkstoffe fest, die in Gasgeräte und Gasanlagen in Kontakt mit Brenngasen der 1.,2. und 3. Gasfamilie eingesetzt werden. Die stellt ausserdem eine Klassifizierung nach Temperaturbereich und Härte auf. Diese Norm gilt für Werkstoffe, aus denen homogene Dichtungen und homogene oder verstärkte Membranen hergestellt werden.

Matériaux a base de caoutchouc pour joints et membranes destinés aux appareils a gaz et appareillages pour le gaz

La présente norme définit les exigences et les méthodes d'essais associées relatives aux caoutchoucs vulcanisés utilisés dans les appareils d'utilisation et équipement de gaz en contact avec les combustibles gazeux de la premiere, deuxieme ou troisieme famille. Il est aussi établi une classification basée dans une gamme de température et de dureté. Cette norme est applicable aux matériaux a partir desquels sont fabriqués les joints homogenes et les membranes homogenes ou renforcées.

Gumeni materiali za tesnila in membrane v plinskih aparatih in plinskih napravah

General Information

Status
Withdrawn
Publication Date
30-Sep-1996
Withdrawal Date
06-Aug-2019
ICS
83.140.50 - Seals
91.140.40 - Gas supply systems
Technical Committee
PLN - Gas appliances for domestic use
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Aug-2019
Due Date
25-Aug-2019
Completion Date
07-Aug-2019
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
2016/426 - REGULATION (EU) 2016/426 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC
89/106/EEC - Construction products
90/396/EEC - Appliances burning gaseous fuels
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
EN 549:1994 - Rubber materials for seals and diaphragms for gas appliances and gas equipment

Relations

Replaced By
SIST EN 549:2019 - Rubber materials for seals and diaphragms for gas appliances and gas equipment
Effective Date
08-Jun-2022
Replaces
SIST EN 291:1996 - Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specifications for material
Effective Date
01-Dec-1996
Replaced By
SIST EN 549:2019 - Rubber materials for seals and diaphragms for gas appliances and gas equipment
Effective Date
01-Sep-2019

Buy Standard

EN 549:1996EN 549:1996
PreviousNext
Standard
EN 549:1996
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 549:1996
01-oktober-1996
1DGRPHãþD
SIST EN 291:1996
Gumeni materiali za tesnila in membrane v plinskih aparatih in plinskih napravah
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Elastomer-Werkstoffe für Dichtungen und Membranen in Gasgeräten und Gasanlagen
Matériaux a base de caoutchouc pour joints et membranes destinés aux appareils a gaz
et appareillages pour le gaz
Ta slovenski standard je istoveten z: EN 549:1994
ICS:
83.140.50 Tesnila Seals
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST EN 549:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 549:1996

---------------------- Page: 2 ----------------------

SIST EN 549:1996

---------------------- Page: 3 ----------------------

SIST EN 549:1996

---------------------- Page: 4 ----------------------

SIST EN 549:1996

---------------------- Page: 5 ----------------------

SIST EN 549:1996

---------------------- Page: 6 ----------------------

SIST EN 549:1996

---------------------- Page: 7 ----------------------

SIST EN 549:1996

---------------------- Page: 8
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 549:2019(Main)
Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 549:2019

This standard specifies requirements and associated test methods for rubber materials used in gas installations, gas equipment and gas appliances in contact with 1st, 2nd and 3rd family combustible gases as classified in EN 437 e.g. natural gas, LPG, bio methane bio LPG. It also establishes a classification based on temperature range and hardness. This standard is applicable to materials from which are manufactured homogeneous seals and homogeneous or reinforced diaphragms.
Since the dimensions and shape of the components differ from those of standard test pieces taken from sheet material as used for type testing of the rubber materials according to this standard, tolerances have been made in the requirements specified by Annex A for the components with respect to those specified for standard test pieces.
The range of operating temperatures covered by this standard is - 40 °C to + 150 °C.
This standard is not applicable for silicone rubber used either above 200 hPa (200 mbar) nominal pressure or at temperatures below 0 °C with 3rd family gases, as there is the possibility of condensation.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-1:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
EN 751-1:1996

This European Standard specifies requirements and test methods for anaerobic jointing compounds (hereafter referred to as "jointing compounds") suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems.  [The scope of the complete standard includes a table.]

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-2:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 751-2:1996

This European Standard specifies requirements and test methods for non-hardening sealing materials (hereafter referred to as jointing compounds) suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems (Class A), in gas appliances and their auxiliary equipment (Class B) as well as in LPG storage (Class C) according to table 1.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in the form of PTFE-tapes are covered by EN 751-3.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 549:2019+A1:2023(Main + Amendment)
Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 549:2019+A1:2023

This document specifies requirements and associated test methods for rubber materials used in gas installations, gas equipment and gas appliances in contact with 1st, 2nd and 3rd family combustible gases as classified in EN 437:2018, additionally LPG, bio methane and bio LPG, in the same quality, are covered. It also establishes a classification based on temperature range and hardness. This document is applicable to materials from which homogeneous seals and homogeneous or reinforced diaphragms are manufactured.
Since the dimensions and shape of the components differ from those of standard test pieces taken from sheet material as used for type testing of the rubber materials according to this document, tolerances have been made in the requirements specified by Annex A for the components with respect to those specified for standard test pieces.
The range of operating temperatures covered by this document is –40 °C to +150 °C.
For applications with potential condensation, this document is not applicable for silicon rubber, e.g. above 200 hPa (200 mbar) nominal pressure or at temperatures below 0 °C with 3rd family gases.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 549:2019(Main)
Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 549:2019

This standard specifies requirements and associated test methods for rubber materials used in gas installations, gas equipment and gas appliances in contact with 1st, 2nd and 3rd family combustible gases as classified in EN 437 e.g. natural gas, LPG, bio methane bio LPG. It also establishes a classification based on temperature range and hardness. This standard is applicable to materials from which are manufactured homogeneous seals and homogeneous or reinforced diaphragms.
Since the dimensions and shape of the components differ from those of standard test pieces taken from sheet material as used for type testing of the rubber materials according to this standard, tolerances have been made in the requirements specified by Annex A for the components with respect to those specified for standard test pieces.
The range of operating temperatures covered by this standard is - 40 °C to + 150 °C.
This standard is not applicable for silicone rubber used either above 200 hPa (200 mbar) nominal pressure or at temperatures below 0 °C with 3rd family gases, as there is the possibility of condensation.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 682:2002/A1:2005(Amendment)
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 682:2002/A1:2005

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 682:2002(Main)
Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 682:2002

This European Standard specifies requirements for elastomeric materials used in seals for supply pipes and fittings, ancillaries and valves at operating temperatures in general from - 5 °C up to 50 °C and in special cases from - 15 °C up to 50 °C, for the following:
General applications (see Table 4, type G)
a)    gaseous fuel (manufactured, natural and liquefied petroleum gas [LPG] in gaseous phase);
b)    hydrocarbon fluids with aromatic content up to 30 % (V/V), including LPG in liquid phase.
Special applications (see Table 4, type H)
Materials suitable for carrying gaseous fuels containing gas condensates and hydrocarbon fluids of unrestricted aromatic content.
General requirements for finished joint seals are also given; any additional requirements called for by the particular application are specified in the relevant product standards taking into account that the performance of pipe joints is a function of the seal material properties, seal geometry and pipe joint design. This European Standard should be used where appropriate with product standards which specify performance requirements for joints.
This European Standard is applicable to joint seals for all pipeline materials including iron, steel, copper and plastics.
In the case of composite seals requirements in 4.2.8 and 4.2.9 apply only when the materials used for any elastomeric parts come into contact with gaseous fuel or hydrocarbon fluid.
Elongation at break, tensile strength, compression set and stress relaxation requirements for materials of hardness categories 80 and 90 apply only when they constitute that part of the seal which participates directly in the sealing function or in long term stability.
This standard is not applicable to the following:
a)    seals made from cellular materials;
b)    seals with enclosed voids as part of their design;
c)    seals with requirements of resistance to flame or to thermal stress;
d)    seals which contain splices joining pre-vulcanised profile ends.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-1:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
EN 751-1:1996

This European Standard specifies requirements and test methods for anaerobic jointing compounds (hereafter referred to as "jointing compounds") suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems.  [The scope of the complete standard includes a table.]

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-2:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 751-2:1996

This European Standard specifies requirements and test methods for non-hardening sealing materials (hereafter referred to as jointing compounds) suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems (Class A), in gas appliances and their auxiliary equipment (Class B) as well as in LPG storage (Class C) according to table 1.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in the form of PTFE-tapes are covered by EN 751-3.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 549:2019/oprA1:2022(Amendment)
Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 549:2019/prA1

This document specifies requirements and associated test methods for rubber materials used in gas installations, gas equipment and gas appliances in contact with 1st, 2nd and 3rd family combustible gases as classified in EN 437:2018, additionally LPG, bio methane and bio LPG, in the same quality, are covered. It also establishes a classification based on temperature range and hardness. This document is applicable to materials from which homogeneous seals and homogeneous or reinforced diaphragms are manufactured.
Since the dimensions and shape of the components differ from those of standard test pieces taken from sheet material as used for type testing of the rubber materials according to this document, tolerances have been made in the requirements specified by Annex A for the components with respect to those specified for standard test pieces.
The range of operating temperatures covered by this document is –40 °C to +150 °C.
For applications with potential condensation, this document is not applicable for silicon rubber, e.g. above 200 hPa (200 mbar) nominal pressure or at temperatures below 0 °C with 3rd family gases.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day