SIST EN 581-3:2026

Outdoor furniture - Mechanical safety requirements and test methods - Part 3: Tables for camping, domestic and contract use

This document specifies requirements for the general safety and structural safety which include strength, reliability and stability for outdoor tables for camping use, for domestic use and for contract use, used by adults, including those with glass in their construction.
It does not apply to street furniture.
It does not apply to office tables, worktables, desks and laboratory worktops for educational institutions for which other EN standards exist.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in outdoor tables for which other EN standards can be applied.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.

Außenmöbel - Sitzmöbel und Tische für Camping-, Wohn- und Objektbereich - Teil 3: Mechanische Sicherheitsanforderungen für Tische

Dieses Dokument legt Anforderungen an die allgemeine Sicherheit und die Tragsicherheit, wozu Festigkeit, Verlässlichkeit und Standsicherheit gehören, für Außentische für den Camping-, Wohn- und Objektbereich für Erwachsene, einschließlich Ausführungen mit Glas, fest.
Es ist nicht anwendbar für öffentlich aufgestellte Straßenmöbel.
Es ist nicht anwendbar für Büro-, Arbeits- und Schreibtische sowie Laborarbeitsplatten für Bildungseinrich
tungen, für die andere EN-Normen bestehen.
Mit Ausnahme der Standsicherheitsprüfungen enthält dieses Dokument keine Beurteilung der Eignung von in Außentischen enthaltenen Aufbewahrungsmöglichkeiten, für die andere EN-Normen gelten können.
Es definiert keine Anforderungen an die elektrische Sicherheit.
Es definiert keine Anforderungen an die Alterungsbeständigkeit und Verwitterung.

Mobilier d'extérieur - Sièges et tables à usages domestique, collectif et de camping - Partie 3 : Exigences de sécurité mécanique pour les tables

Le présent document spécifie des exigences en matière de sécurité, de résistance, de durabilité et de stabilité de tous les types de tables d’extérieur destinées à être utilisées par des adultes, y compris celles comportant du verre.
Il ne s’applique pas au mobilier urbain.
Il ne s’applique pas aux tables de travail de bureau et aux bureaux, ni aux tables et plans de travail de laboratoire à destination des établissements d’enseignement pour lesquels il existe d’autres Normes européennes.
À l’exception des essais de stabilité, le présent document ne fournit aucune évaluation sur l’aptitude à l’usage des éléments de rangement inclus dans les tables d’extérieur.
Il n’inclut pas d’exigence relative à la sécurité électrique.
Il n’inclut pas d’exigence relative à la résistance au vieillissement et aux détériorations.
Le présent document comporte trois annexes :
—   l’Annexe A (normative), Méthodes d’essai pour le coincement des doigts ;
—   l’Annexe B (informative), Exigences d’essai supplémentaires ;
—   l’Annexe C (informative), Niveau de sévérité des essais en lien avec l’usage des tables.

Vrtno pohištvo - Mehanske varnostne zahteve in preskusne metode - 3. del: Mize za kampiranje, domačo in pogodbeno uporabo

Ta dokument določa zahteve za splošno varnost in strukturno varnost, ki vključujejo trdnost, zanesljivost in stabilnost za zunanje mize za kampiranje, za domačo uporabo in za pogodbeno uporabo, ki jih uporabljajo odrasli, vključno s tistimi, ki imajo v svoji konstrukciji steklo.
Ne velja za ulično pohištvo.
Ne velja za pisarniške mize, delovne mize, pisalne mize in laboratorijske delovne površine za izobraževalne ustanove, za katere obstajajo drugi EN standardi.
Z izjemo testov stabilnosti ta dokument ne zagotavlja ocene primernosti kakršnih koli shranjevalnih lastnosti, vključenih v zunanje mize, za katere se lahko uporabijo drugi EN standardi.
Ne vključuje zahtev za električno varnost.
Ne vključuje zahtev za odpornost na staranje, razgradnjo.

General Information

• Status: Published
• Public Enquiry End Date: 01-Nov-2024
• Publication Date: 10-Jun-2026
• ICS: 97.140 - Furniture
• ICS: 97.200.30 - Camping equipment and camp-sites
• Technical Committee: POH - Furniture
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Jun-2026
• Due Date: 07-Aug-2026
• Completion Date: 11-Jun-2026
• Ref Project: EN 581-3:2026 - Outdoor furniture - Mechanical safety requirements and test methods - Part 3: Tables for camping, domestic and contract use

Relations

• Replaces: SIST EN 581-3:2017 - Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables
• Effective Date: 01-Jul-2026
• Referred By: SIST-TP CEN/TR 581-4:2006 - Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 4: Requirements and test methods for durability under the influence of climatic conditions
• Effective Date: 27-May-2026
• Referred By: SIST EN 581-1:2006 - Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements
• Effective Date: 27-May-2026

Overview

SIST EN 581-3:2026 specifies the mechanical safety and test methods for outdoor tables, focusing on their strength, reliability, and stability. It applies to tables used in camping, domestic, and contract environments by adults, including outdoor tables that incorporate glass. This standard sets out requirements to prevent physical injury during normal use, addresses structural integrity, and provides guidance for safe design and testing. It does not apply to street furniture, office tables, educational worktops, or include requirements for electrical safety or resistance to ageing.

Key Topics

• Mechanical Safety Requirements

  • General safety: Tables must be designed to prevent injury and avoid damage during intended use.
  • Edges and corners: Accessible edges should be rounded, chamfered, and free from burs and sharp points.
  • Shear and compression points: Criteria are set to minimize risks during both setup and everyday use.

• Structural Safety

  • Stability: Testing under vertical loads and for configuration changes (e.g., extension pieces or parasol support).
  • Strength and durability: Defined parameters based on intended use, such as camping, domestic, or contract, with different test forces and load cycles.
  • Glass safety: Guidelines for glass components to meet safety glass requirements under EN 12150-1 and EN 12600.

• Test Methods

  • Standardized test sequences: Include load, durability, and impact tests (as per EN 1730).
  • Specific probes and test apparatus: For finger entrapment, sharp edges, and shear/compression hazards.
  • Documented procedures for additional performance such as folding durability and castor-wheeled tables.

• User Information

  • Clear instructions for assembly, maintenance, safe use, and any special features (such as parasol holes).
  • Labelling and documentation must be provided in the user's language with required warnings and technical information.

Applications

SIST EN 581-3:2026 is crucial for manufacturers, designers, importers, and retailers of outdoor tables intended for:

• Camping: Lightweight, portable tables designed to fold or be easily transported.
• Domestic Use: Garden or patio tables for private residences, focused on safety in home environments.
• Contract Use: Robust furniture for public areas in commercial or hospitality settings (excluding permanently fixed street furniture).

By following this standard, stakeholders ensure products are safe for adults, compliant with EU and international expectations, and suitable for repeated use under a variety of environmental conditions. Adhering to this standard supports consumer safety, product reliability, and legal compliance, while enhancing market trust in outdoor furniture.

Related Standards

Compliance with SIST EN 581-3:2026 often requires reference to related standards, including:

• EN 581-1: General safety requirements for outdoor furniture.
• EN 1730: Test methods for stability, strength, and durability of tables.
• EN 12150-1: Thermally toughened safety glass for building applications.
• EN 12600: Impact test methods for flat glass used in furniture.
• EN 581-2: Mechanical safety for outdoor seating.
• prEN 17684 (under development): Electrical safety for outdoor furniture.

Adopting SIST EN 581-3:2026 ensures your outdoor tables meet essential safety and durability benchmarks, reducing liability and promoting consumer confidence.

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2026
Nadomešča:
SIST EN 581-3:2017
Zunanje pohištvo - Mehanske varnostne zahteve in preskusne metode - 3. del:
Mize za domačo in javno uporabo ter taborjenje
Outdoor furniture - Mechanical safety requirements and test methods - Part 3: Tables for
camping, domestic and contract use
Außenmöbel - Sitzmöbel und Tische für Camping-, Wohn- und Objektbereich - Teil 3:
Mechanische Sicherheitsanforderungen für Tische
Mobilier d'extérieur - Sièges et tables à usages domestique, collectif et de camping -
Partie 3 : Exigences de sécurité mécanique pour les tables
Ta slovenski standard je istoveten z: EN 581-3:2026
ICS:
97.140 Pohištvo Furniture
97.200.30 Oprema za taborjenje in Camping equipment and
tabori camp-sites
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 581-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2026
EUROPÄISCHE NORM
ICS 97.140 Supersedes EN 581-3:2017
English Version
Outdoor furniture - Mechanical safety requirements and
test methods - Part 3: Tables for camping, domestic and
contract use
Mobilier d'extérieur - Sièges et tables à usages Außenmöbel - Sitzmöbel und Tische für Camping-,
domestique, collectif et de camping - Partie 3 : Wohn- und Objektbereich - Teil 3: Mechanische
Exigences de sécurité mécanique pour les tables Sicherheitsanforderungen für Tische
This European Standard was approved by CEN on 13 April 2026.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 581-3:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test conditions . 5
5 Safety requirements . 6
5.1 General safety requirements . 6
5.2 Stability . 6
5.2.1 General. 6
5.2.2 Stability under vertical load . 6
5.2.3 Stability for tables with extension elements. 6
5.2.4 Stability of tables designed to support a parasol . 6
5.3 Structural safety . 7
5.3.1 General. 7
5.3.2 Glass . 7
5.3.3 Test sequences and parameters . 7
5.3.4 Requirements . 9
6 Information for use . 9
7 Test report . 10
Annex A (informative) Additional test recommendations . 11
A.1 General. 11
A.2 Deflection of tabletops test . 11
A.3 Durability of tables with castors . 11
A.4 Durability of folding table . 12
Annex B (informative) Purchase information (guidelines) . 13
Bibliography . 14
European foreword
This document (EN 581-3:2026) has been prepared by Technical Committee CEN/TC 207 “Furniture”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2026, and conflicting national standards shall
be withdrawn at the latest by November 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 581-3:2017.
a) general safety requirements have been added;
b) modification of tests on glass tops;
c) addition of different types of tables with an adjustment of the surface area threshold from 0,25 m to
0,30 m ;
d) modification of the load mass for horizontal durability tests at camping level;
e) clarification of the concept of cantilever tables;
f) vertical durability test for cantilever or pedestal table has been added;
g) vertical impact test has been added;
h) additional test recommendations have been added (Annex B);
i) Annex A of EN 581-3:2017 was changed in Annex B;
j) new definitions for table for camping use, table for domestic use and table for contract use have been
added.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies requirements for the general safety and structural safety which include strength,
reliability and stability for outdoor tables for camping use, for domestic use and for contract use, used by
adults, including those with glass in their construction.
It does not apply to street furniture.
It does not apply to office tables, worktables, desks and laboratory worktops for educational institutions
for which other EN standards exist.
With exception of the stability tests, this document does not provide assessment of the suitability of any
storage features included in outdoor tables for which other EN standards can be applied.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 581-1, Outdoor furniture — Seating and tables for camping, domestic and contract use — Part 1:
General safety requirements
EN 1730:2012, Furniture — Tables — Test methods for the determination of stability, strength and
durability
EN 12150-1:2015+A1:2019, Glass in building — Thermally toughened soda lime silicate safety glass —
Part 1: Definition and description
EN 12600:2002, Glass in building — Pendulum test — Impact test method and classification for flat glass
EN 14072:2003, Glass in furniture — Test methods
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
table for camping use
table for outdoor use light in weight, intended for occasional use in connection with camping and
travelling and can be reduced in volume for transporting and storing
Note 1 to entry: Such products are often foldable or knock-down.
3.2
table for domestic use
table for outdoor use intended for private use in places without public access
Note 1 to entry: Such products can be foldable or knock-down.
3.3
table for contract use
table for outdoor use intended for non-private use in places with public access
Note 1 to entry: Such products can be foldable or knock-down.
3.4
street furniture
outdoor furniture used in public space, permanently fixed to the ground or any structure or not able to
be manually removed
Note 1 to entry: Examples of structure where the outdoor street furniture is attached include bus stop shelter, wall
and art structure.
3.5
accessible part
part to which access can easily be gained by the user when the table is in its intended configuration of use
and for which the probability of unintentional user contact is high, including all parts 100 mm in from the
edges
[SOURCE: EN 12521:2023, definition 3.1]
3.6
extension element
component that can be pulled out and pushed in
EXAMPLE Drawers, suspended pocket files, keyboard trays.
[SOURCE: EN 16122:2012, definition 3.4]
3.7
ancillary surface
surface additional to the main surface intending for occasional use
...