SIST EN 50663:2018
(Main)Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
This European standard provides simple conformity assessment methods for low-power electronic and electrical equipment operating at frequencies between 10 MHz and 300 GHz to an electromagnetic field (EMF) exposure limit. If such equipment cannot be shown to comply with the applicable EMF exposure requirements using the exposure assessment methods in this standard, then other EMF product standards, may be used for conformity assessment.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of Radio Equipment Directive 2014/53/EU. Annex ZZ establishes relationships between this standard and that EU Directives.
Other standards can apply to products covered by this document. In particular this document is not designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety requirements other than those specifically related to human exposure to electromagnetic fields.
Fachgrundnorm für die Beurteilung der Übereinstimmung von elektronischen und elektrischen Geräten kleiner Leistung mit den Basisgrenzwerten für die Exposition von Personen gegenüber elektromagnetischen Feldern (10 MHz bis 300 GHz)
Norme de produit pour l'évaluation de la conformité des appareils électriques et électroniques de faible puissance aux restrictions de base concernant l'exposition des personnes aux champs électromagnétiques (10 MHz à 300 GHz)
La présente Norme européenne fournit des méthodes simples pour l’évaluation de la conformité des appareils électriques et électroniques de faible puissance fonctionnant à des fréquences comprises entre 10 MHz et 300 GHz, à une limite d’exposition aux champs électromagnétiques (EMF, electromagnetic field). S'il ne peut pas être démontré, en utilisant les méthodes d’évaluation de l'exposition de la présente norme, qu’un appareil satisfait aux exigences d'exposition aux champs électromagnétiques applicables, d'autres normes de produit sur les champs électromagnétiques peuvent alors être utilisées pour l'évaluation de la conformité.
Le présent document a été élaboré dans le cadre d'un mandat donné au CENELEC par la Commission européenne et l’Association européenne de libre-échange, et vient à l'appui des exigences essentielles de la Directive sur les équipements radioélectriques 2014/53/UE. L'Annexe ZZ établit des relations entre la présente norme et cette Directive UE.
D'autres normes peuvent s'appliquer aux produits couverts par le présent document. En particulier, ce document n'est pas destiné à évaluer la compatibilité électromagnétique avec d'autres appareils; par ailleurs, il ne reflète pas les exigences de sécurité du produit autres que celles liées spécifiquement à l'exposition des personnes aux champs électromagnétiques.
Splošni standard za oceno skladnosti nizkonapetostne elektronske in električne opreme glede na mejne vrednosti izpostavljenosti ljudi elektromagnetnemu sevanju (10 MHz - 300 GHz)
Ta evropski standard določa preproste metode za ocenjevanje skladnosti za nizkonapetostno elektronsko in električno opremo, ki deluje pri frekvencah med 10 MHz in 300 GHz glede na mejne vrednosti izpostavljenosti elektromagnetnemu sevanju (EMF). Če skladnosti take opreme z veljavnimi zahtevami glede izpostavljenosti elektromagnetnemu sevanju ni mogoče prikazati z metodami za ocenjevanje v tem standardu, se lahko za oceno skladnosti uporabijo drugi standardi za proizvode elektromagnetnega sevanja.
Ta dokument je bil pripravljen v okviru mandata, ki sta ga CENELEC dodelila Evropska komisija in Evropsko združenje za prosto trgovino, ter podpira bistvene zahteve Direktive o radijski opremi EU 2014/53/EU. Dodatek ZZ navaja razmerja med tem standardom in tistimi evropskimi direktivami.
Za proizvode, ki jih obravnava ta dokument, se lahko uporabljajo drugi standardi. Ta standard ni namenjen za ocenjevanje elektromagnetne združljivosti z drugo opremo in ne odraža nobenih varnostnih zahtev za proizvode, razen tistih, ki se posebej navezujejo na izpostavljenost delavcev elektromagnetnemu sevanju.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50663:2018
01-januar-2018
6SORãQLVWDQGDUG]DRFHQRVNODGQRVWLQL]NRQDSHWRVWQHHOHNWURQVNHLQHOHNWULþQH
RSUHPHJOHGHQDPHMQHYUHGQRVWLL]SRVWDYOMHQRVWLOMXGLHOHNWURPDJQHWQHPX
VHYDQMX 0+]*+]
Generic standard for assessment of low power electronic and electrical equipment
related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
Norme de produit pour l'évaluation de la conformité des appareils électriques et
électroniques de faible puissance aux restrictions de base concernant l'exposition des
personnes aux champs électromagnétiques (10 MHz à 300 GHz)
Ta slovenski standard je istoveten z: EN 50663:2017
ICS:
13.280 Varstvo pred sevanjem Radiation protection
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 50663:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50663:2018
---------------------- Page: 2 ----------------------
SIST EN 50663:2018
EUROPEAN STANDARD EN 50663
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2017
ICS 17.240
English Version
Generic standard for assessment of low power electronic and
electrical equipment related to human exposure restrictions for
electromagnetic fields (10 MHz - 300 GHz)
Norme de produit pour l'évaluation de la conformité des Produktnorm für die Beurteilung der Übereinstimmung von
appareils électriques et électroniques de faible puissance elektronischen und elektrischen Geräten kleiner Leistung
aux restrictions de base concernant l'exposition des mit den Basisgrenzwerten für die Exposition von Personen
personnes aux champs électromagnétiques (10 MHz à 300 gegenüber elektromagnetischen Feldern (10 MHz bis 300
GHz) GHz)
This European Standard was approved by CENELEC on 2017-08-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50663:2017 E
---------------------- Page: 3 ----------------------
SIST EN 50663:2018
EN 50663:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Exposure conditions . 4
5 Normative limits . 5
5.1 Equipment used by the general public . 5
5.2 Equipment used only by workers . 5
6 Evaluation of compliance . 5
7 Assessment uncertainty . 5
8 Evaluation report . 5
Annex ZZA (informative) Relationship between this European standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered . 6
Annex ZZB (informative) Relationship between this European standard and the essential
requirements of Directive 2014/53/EU [2014 OJ L153] aimed to be covered. 8
2
---------------------- Page: 4 ----------------------
SIST EN 50663:2018
EN 50663:2017 (E)
European foreword
This document (EN 50663:2017) has been prepared by the Technical Committee CENELEC/TC 106X
“Electromagnetic fields in the human environment”.
The following dates are fixed:
– latest date by which the EN has to be implemented (dop) 2018-08-07
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2020-08-07
with the EN have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under mandates (M/511 and M/536) given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of the Radio
Equipment Directive 2014/53/EU and the Low Voltage Directive 2014/35/EU.
For relationships with EU Directives, see informative Annexes ZZA and ZZB, which are an integral part of
this document.
This European Standard is intended to be read in conjunction with EN 62479:2010 “Assessment of the
compliance of low power electronic and electrical equipment with the basic restrictions related to human
exposure restrictions for to electromagnetic fields (10 MHz to 300 GHz)”.
3
---------------------- Page: 5 ----------------------
SIST EN 50663:2018
EN 50663:2017 (E)
1 Scope
This European Standard provides simple conformity assessment methods for low-power electronic and
electrical equipment operating at frequencies between 10 MHz and 300 GHz to an electromagnetic field
(EMF) exposure limit. If such equipment cannot be shown to comply with the applicable EMF exposure
requirements using the exposure assessment methods in this standard, then other EMF product standards
may be used for conformity assessment.
NOTE Other standards can apply to equipment covered by this document. In particular, this document is not
designed to evaluate the electromagnetic compatibility with other equipment; nor does it reflect any product safety
requirements other than those specifically related to human exposure to electromagnetic fields.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 62479:2010, Assessment of the compliance of low power electronic and electrical equipment with the
basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
(IEC 62479:2010)
EN 62311:2008, Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz - 300 GHz) (IEC 62311:2007)
Council Recommendation 1999/519/EC of 12 July 1999, on the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz), Official Journal, L199, of 1999-7-30, p.59-70
Directive 2013/35/EU of 26 June 2013, on the minimum health and safety requirements regarding the
exposure of workers to the risks arising from physical agents (electromagnetic fields). Official Journal, L179,
of 2013-6-29, p. 1–21
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
basic restrictions
restrictions on exposure of the general public to electric, magnetic and electromagnetic fields that are based
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.