iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50125-1:2001

(Main)

Railway applications - Environmental conditions for equipment -- Part 1: Equipment on board rolling stock

Railway applications - Environmental conditions for equipment -- Part 1: Equipment on board rolling stock

This standard intends to define environmental conditions within Europe (it can also be applied elsewhere by agreement). The scope of this standard covers the definitions and ranges of the following parameters: Altitude, Temperature, Humidity, Air movement, Rain, Snow and hail, Ice, Solar radiation, Lightning, Pollution, Vibrations and shocks, Electromagnetic interference environment, Acoustic noise environment, Supply system characteristics, for complete rolling stock and all on-board equipment (mechanical, electromechanical, electrical, electronic). In particular the standard defines interface conditions between the vehicle and its environment. The defined environmental conditions are considered as normal in service. Acceptable deviations are defined in the relevant clauses dealing with the environmental parameters, together with any mitigation in operation that may be required. Microclimates surrounding components may be defined by relevant product standards or by special requirements. Passenger effects on the equipment and equipment effects on the passengers are not considered in this standard. The standar does not apply to cranes, mining vehicle, cable cars. The standard also does not apply to natural disaster (earthquakes).

Bahnanwendungen - Umweltbedingungen für Betriebsmittel -- Teil 1: Betriebsmittel auf Bahnfahrzeugen

Applications ferroviaires - Conditions d'environnement pour le matériel -- Partie 1: Equipement embarqué du matériel roulant

Železniške naprave – Okoljski pogoji za opremo – 1. del: Oprema na voznih sredstvih

General Information

Status
Published
Publication Date
31-Jan-2001
ICS
13.020.99 - Other standards related to environmental protection
45.060.01 - Railway rolling stock in general
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2001
Due Date
01-Feb-2001
Completion Date
01-Feb-2001
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
96/48/EC - Interoperability of the trans-European high-speed rail system
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
Ref Project
EN 50125-1:1999 - Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock

Relations

Replaced By
SIST EN 50125-1:2014 - Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
Effective Date
28-Jan-2023
Revised
SIST EN 50125-1:2014 - Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
Effective Date
06-May-2014
Revised
SIST EN 50125-1:2014 - Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
Effective Date
07-Sep-2012

Buy Standard

EN 50125-1:2001EN 50125-1:2001
PreviousNext
Standard
EN 50125-1:2001
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50125-1:2001
01-februar-2001
Železniške naprave – Okoljski pogoji za opremo – 1. del: Oprema na voznih
sredstvih
Railway applications - Environmental conditions for equipment -- Part 1: Equipment on
board rolling stock
Bahnanwendungen - Umweltbedingungen für Betriebsmittel -- Teil 1: Betriebsmittel auf
Bahnfahrzeugen
Applications ferroviaires - Conditions d'environnement pour le matériel -- Partie 1:
Equipement embarqué du matériel roulant
Ta slovenski standard je istoveten z: EN 50125-1:1999
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 50125-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50125-1:2001

---------------------- Page: 2 ----------------------

SIST EN 50125-1:2001

---------------------- Page: 3 ----------------------

SIST EN 50125-1:2001

-------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50125-1:2014(Main)
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
EN 50125-1:2014

EN 50125-1 intends to define environmental conditions within Europe. The scope of this European Standard covers the definitions and ranges of the following parameters: Altitude, temperature, humidity, air movement, rain, snow and hail, ice, solar radiation, lightning, pollution for rolling stock and on-board equipment (mechanical, electromechanical, electrical, electronic). In particular, this European Standard defines interface conditions between the vehicle and its environment. The defined environmental conditions are considered as normal in service. Rolling stock or parts of it can also be used outside the specification with reduced performance. Microclimates surrounding components may be defined by relevant product standards or by special requirements. Passenger effects on the equipment and equipment effects on the passengers are not considered in this European Standard. This European Standard does not apply to cranes, mining vehicles, cable cars. This European Standard also does not apply to natural disaster (e.g. earthquake).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50125-2:2003(Main)
Railway applications - Environmental conditions for equipment -- Part 2: Fixed electrical installations
EN 50125-2:2002

This European Standard takes into account environmental conditions within Europe.
This European Standard deals with the environmental influences on fixed electrical installations for traction power supply and equipment essential to operate a railway
-   in open air;
-   in covered areas;
-   in tunnels;
-   within enclosures placed in above areas.
Escalators, lifts, fire protection, lighting in tunnels and on platforms, ticket machines, ventilation systems and non-essential functions are not included.
Such influences include altitude, temperature and humidity, air movement, rain, snow, hail, ice, sand, solar radiation, lightning, pollution, vibration, shocks and EMC.
This standard does not specify the test requirements for equipment.
In case of environmental conditions not covered by the standard the data to be adopted for a specific project should be clearly stipulated when preparing a specification.
This standard is not intended to apply to cranes, installations in underground mines, suspended cable cars and funicular railways.
Nuclear radiation is excluded.
Signalling and telecommunications systems are not considered in this standard.
Fixed installed signalling and telecommunication equipment shall comply with EN 50125-3.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50125-3:2003(Main)
Railway applications - Environmental conditions for equipment -- Part 3: Equipment for signalling and telecommunications
EN 50125-3:2003

This European Standard specifies the environmental conditions encountered within Europe. It can also be applied elsewhere by agreement between the supplier and the customer.
The scope of this European Standard covers the design and the use of equipment and any portable equipment for signalling and telecommunications systems (including test, measure, monitoring equipment, etc.).
The portable equipment must comply with the sections of this European Standard relevant to their use.
This European Standard does not specify the test requirements for equipment.
In particular the standard intends to define
–   interface conditions between the equipment and its environment,
–   parameters to be used by designers when calculating R.A.M.S. and life time with respect to environmental condition effects.
In this respect it gives general guidance in order to allow consistent assessments of contract documentation for European projects.
The defined environmental conditions are considered as normal in service.
Microclimates surrounding components may need special requirements to be defined by the product standard.
The effects of any signalling and telecommunications equipment (in either or failure mode of operation) on the overall signalling system safety are not within the scope of this European Standard. This European Standard does not provide the designer with information to enable him to determine the safety risk associated with environmental conditions. The safety of persons in the vicinity of (or working on) the signalling and telecommunications equipment is also out of the scope of this European Standard. The effects of vandalism on the equipment are not considered in this European Standard.
This European Standard applies to all signalling and telecommunications systems except those used for cranes, mining vehicles and cable cars. It does not define the specifications for train-borne signalling and telecommunications systems.
The train-borne signalling and telecommunications systems must comply with rolling stock environmental conditions specifications (EN 50125-1).

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50125-1:2014(Main)
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
EN 50125-1:2014

EN 50125-1 intends to define environmental conditions within Europe. The scope of this European Standard covers the definitions and ranges of the following parameters: Altitude, temperature, humidity, air movement, rain, snow and hail, ice, solar radiation, lightning, pollution for rolling stock and on-board equipment (mechanical, electromechanical, electrical, electronic). In particular, this European Standard defines interface conditions between the vehicle and its environment. The defined environmental conditions are considered as normal in service. Rolling stock or parts of it can also be used outside the specification with reduced performance. Microclimates surrounding components may be defined by relevant product standards or by special requirements. Passenger effects on the equipment and equipment effects on the passengers are not considered in this European Standard. This European Standard does not apply to cranes, mining vehicles, cable cars. This European Standard also does not apply to natural disaster (e.g. earthquake).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50125-2:2003(Main)
Railway applications - Environmental conditions for equipment -- Part 2: Fixed electrical installations
EN 50125-2:2002

This European Standard takes into account environmental conditions within Europe.
This European Standard deals with the environmental influences on fixed electrical installations for traction power supply and equipment essential to operate a railway
-   in open air;
-   in covered areas;
-   in tunnels;
-   within enclosures placed in above areas.
Escalators, lifts, fire protection, lighting in tunnels and on platforms, ticket machines, ventilation systems and non-essential functions are not included.
Such influences include altitude, temperature and humidity, air movement, rain, snow, hail, ice, sand, solar radiation, lightning, pollution, vibration, shocks and EMC.
This standard does not specify the test requirements for equipment.
In case of environmental conditions not covered by the standard the data to be adopted for a specific project should be clearly stipulated when preparing a specification.
This standard is not intended to apply to cranes, installations in underground mines, suspended cable cars and funicular railways.
Nuclear radiation is excluded.
Signalling and telecommunications systems are not considered in this standard.
Fixed installed signalling and telecommunication equipment shall comply with EN 50125-3.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50125-3:2003(Main)
Railway applications - Environmental conditions for equipment -- Part 3: Equipment for signalling and telecommunications
EN 50125-3:2003

This European Standard specifies the environmental conditions encountered within Europe. It can also be applied elsewhere by agreement between the supplier and the customer.
The scope of this European Standard covers the design and the use of equipment and any portable equipment for signalling and telecommunications systems (including test, measure, monitoring equipment, etc.).
The portable equipment must comply with the sections of this European Standard relevant to their use.
This European Standard does not specify the test requirements for equipment.
In particular the standard intends to define
–   interface conditions between the equipment and its environment,
–   parameters to be used by designers when calculating R.A.M.S. and life time with respect to environmental condition effects.
In this respect it gives general guidance in order to allow consistent assessments of contract documentation for European projects.
The defined environmental conditions are considered as normal in service.
Microclimates surrounding components may need special requirements to be defined by the product standard.
The effects of any signalling and telecommunications equipment (in either or failure mode of operation) on the overall signalling system safety are not within the scope of this European Standard. This European Standard does not provide the designer with information to enable him to determine the safety risk associated with environmental conditions. The safety of persons in the vicinity of (or working on) the signalling and telecommunications equipment is also out of the scope of this European Standard. The effects of vandalism on the equipment are not considered in this European Standard.
This European Standard applies to all signalling and telecommunications systems except those used for cranes, mining vehicles and cable cars. It does not define the specifications for train-borne signalling and telecommunications systems.
The train-borne signalling and telecommunications systems must comply with rolling stock environmental conditions specifications (EN 50125-1).

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-18:2023(Main)
Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2023)
EN ISO 3262-18:2023

This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated sodium aluminium
silicate.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12309-1:2023(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
EN 12309-1:2023

1.1   Scope of EN 12309
Appliances covered by this European Standard include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump.
This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems,
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012).
In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this text should be used regardless of the language used.
1.2   Scope of this Part 1 of EN 12309
This part of this European Standard specifies the terms and definitions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-14:2023(Main)
Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)
EN ISO 3262-14:2023

This part of ISO 3262 specifies requirements and corresponding methods of test for cristobalite.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-7:2023(Main)
Extenders - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:2023)
EN ISO 3262-7:2023

This document specifies requirements and corresponding methods of test for dolomite.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day