SIST EN 1837:1999+A1:2009
(Main)Safety of machinery - Integral lighting of machines
Safety of machinery - Integral lighting of machines
This standard specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out.
This standard does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European Standard dealing with the lighting of work places. This European Standard is under preparation.
This standard does not establish additional requirements for the operation of lighting systems
- in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.);
- subject to special rules (e.g. explosive atmospheres);
- where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc.
Sicherheit von Maschinen - Maschinenintegrierte Beleuchtung
Diese Norm legt die Parameter für integrierte Beleuchtungssysteme fest, die für die Beleuchtung in und/oder
an sowohl stationären als auch mobilen Maschinen entworfen sind, um den sicheren Gebrauch der Maschine
und die wirkungsvolle Durchführung der Sehaufgabe in und/oder an der Maschine zu ermöglichen.
Diese Norm spezifiziert keine Beleuchtungssysteme, die an der Maschine montiert sind, um insbesondere
Sehaufgaben außerhalb der Maschine zu beleuchten. Die Funktion und die Anforderungen dieser Systeme
sind in der Europäischen Norm für die Arbeitsstättenbeleuchtung festgelegt. Diese Europäische Norm ist in
Vorbereitung.
Diese Norm legt keine zusätzlichen Anforderungen fest für den Betrieb der Beleuchtungssysteme
⎯ unter schwierigen Bedingungen (extreme Umgebungseinflüsse, wie Anwendungen in Kühlaggregaten,
bei hohen Temperaturen, etc.);
⎯ bei bestehenden speziellen Vorschriften (z. B. für Anforderungen des Explosionsschutzes);
⎯ wenn der Transmissionsgrad durch Umgebungseinflüsse beeinträchtigt ist, wie durch Rauch, Spritzer,
usw.
Sécurité des machines - Eclairage intégré aux machines
La présente norme spécifie les paramètres des systèmes d'éclairage intégrés conçus pour fournir l'éclairage dans et/ou sur les machines fixes et mobiles en assurant la sécurité d'utilisation et l'exécution de la tâche visuelle dans et/ou sur la machine.
Cette norme ne définit pas les systèmes d'éclairage disposés sur les machines, pour éclairer spécifiquement des zones extérieures à la machine où s'effectuent des tâches visuelles.
La fonction et les prescriptions de ces systèmes sont indiqués dans la norme européenne traitant de l'éclairage des lieux de travail. Cette norme européenne est en préparation.
La présente norme ne prescrit pas d'exigences supplémentaires pour le fonctionnement des systèmes d'éclairage :
- dans des conditions difficiles (dans des conditions environnantes extrêmes, comme des applications congélateur, à des températures élevées, etc.) ;
- lorsqu'il est soumis à des règles spéciales (par exemple des atmosphères explosives) ;
- lorsque le facteur de transmission est réduit par des conditions environnantes, comme la fumée, des éclaboussures, etc.
Varnost strojev - Integralna razsvetljava strojev
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost strojev - Integralna razsvetljava strojevSicherheit von Maschinen - Maschinenintegrierte BeleuchtungSécurité des machines - Eclairage intégré aux machinesSafety of machinery - Integral lighting of machines91.160.10Notranja razsvetljavaInterior lighting13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1837:1999+A1:2009SIST EN 1837:1999+A1:2009en,fr,de01-december-2009SIST EN 1837:1999+A1:2009SLOVENSKI
STANDARDSIST EN 1837:19991DGRPHãþD
SIST EN 1837:1999+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1837:1999+A1
September 2009 ICS 13.110; 91.160.10 Supersedes EN 1837:1999English Version
Safety of machinery - Integral lighting of machines
Sécurité des machines - Eclairage intégré aux machines
Sicherheit von Maschinen - Maschinenintegrierte Beleuchtung This European Standard was approved by CEN on 25 January 1999 and includes Amendment 1 approved by CEN on 30 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1837:1999+A1:2009: ESIST EN 1837:1999+A1:2009
EN 1837:1999+A1:2009 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .43!!!!Terms and definitions"""" .54Lighting requirements .55Lighting equipment and installation .66Verification procedures .77Information for use .8Annex A (informative)
Examples .9Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 13Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 14!!!!Bibliography"""" . 15 SIST EN 1837:1999+A1:2009
EN 1837:1999+A1:2009 (E) 3 Foreword This document (EN 1837:1999+A1:2009) has been prepared by Technical Committee CEN/TC 169 "Light and lighting", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. This document includes Amendment 1, approved by CEN on 2009-07-30. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." !This European Standard is a type B standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 1837:1999+A1:2009
EN 1837:1999+A1:2009 (E) 4 Introduction To illuminate visual tasks within and/or at machines integral lighting systems (built in or at machines) can be required. These integral lighting systems require special characteristics that allow both safe use and efficient performance of the visual task by the operator during operation and service. 1 Scope This standard specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out. This standard does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European Standard dealing with the lighting of work places. This European Standard is under preparation. This standard does not establish additional requirements for the operation of lighting systems in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.); subject to special rules (e.g. explosive atmospheres); where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the last edition of the referenced document (including any amendments) applies." !deleted text" !deleted text" !EN 1838, Lighting applications – Emergency lighting" !deleted text" !EN 12464-1:2002, Light and lighting - Lighting of work places – Part 1: Indoor work places EN 12464-2, Light and lighting – Lighting of work places – Part 2: Outdoor work places" !EN 12665:2002, Light and lighting – Basic terms and criteria for specifying lighting requirements" !EN ISO 12100-1:2003, Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery – Basic concepts, general principles for design – Part 2: Technical principles (ISO 12100-2:2003)" SIST EN 1837:1999+A1:2009
EN 1837:1999+A1:2009 (E) 5 3 !!!!Terms and definitions"""" !For the purposes of this document, the terms and definitions given in EN 12464-1:2002 and EN 12665:2002 together with the following apply." 3.1 machinery (machine) An assembly of linked parts or components, at least one of which moves, with the appropriate machine actuators, control and power circuits, etc., joined together for a specific application, in particular for the processing, treatment, moving or packaging of a material. The term "machinery" also covers an assembly of machines which, in order to achieve one and the same end, are arranged and controlled so that they function as an integral whole. ![EN ISO 12100-1:2003]" 3.2 integral lighting system (of a machine) a lighting system consisting of lamp(s), luminaire(s) and associated mechanical and electrical control devices which forms a permanent part of the machine, designed to provide illumination in and/or at the machine !!!!3.3 intended use of a machine use of a machine in accordance with the information provided in the user information (see EN ISO
12100-1:2003, 3.22)" 4 Lighting requirements 4.1 General When arranging the lighting for machines, ergonomic and lighting-engineering principles shall be taken into account. The visual tasks to be carried out in and/or at the machine vary in size, contrast, position and speed of movement. Thus for adequate vision, the exact lighting condition required shall be determined from detailed task analysis. !The lighting requirements specified in this European Standard are based on average difficu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.