EN ISO 11177:2016
(Main)Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2016)
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2016)
ISO 11177:2016 specifies the requirements for product quality and product testing of enamelled valves and pressure pipe fittings for untreated and potable water supply. It is not applicable for chemical service glass-enamel and apparatus enamel.
Emails und Emaillierungen - Innen- und außenemaillierte Armaturen und Druckrohrformstücke für die Roh- und Trinkwasserversorgung - Qualitätsanforderungen und Prüfung (ISO 11177:2016)
Diese Norm legt die Anforderungen an die Produktqualität sowie die Produktprüfung von emaillierten Armaturen und Druckrohrformstücken in der Roh- und Trinkwasserversorgung fest. Sie gilt nicht für Chemie- und Apparateemails.
Émaux vitrifiés - Robinetterie émaillée à l'intérieur et à l'extérieur et raccords de tuyauterie pour conduites forcées destinées à l'alimentation en eau non traitée et en eau potable - Exigences de qualité et essais (ISO 11177:2016)
ISO 11177:2016 spécifie les exigences quant à la qualité et aux essais des produits de robinetterie émaillée et raccords de tuyauterie pour conduites forcées destinées à l'alimentation en eau non traitée et en eau potable. Elle ne s'applique pas aux émaux vitrifiés et émaux d'appareillage destinés à une utilisation chimique.
Steklasti in keramični emajli - Znotraj in zunaj emajlirani ventili in tlačni cevni fitingi za nepitno in pitno vodo - Zahteve za kakovost in preskušanje (ISO 11177:2016)
Ta standard opredeljuje zahteve za kakovost in preskušanje proizvoda za emajlirane ventile ter tlačne cevne fitinge za nepitno in pitno vodo. Ne uporablja se za kemično obdelavo steklastih emajlov in emajliranih aparatov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2016
6WHNODVWLLQNHUDPLþQLHPDMOL=QRWUDMLQ]XQDMHPDMOLUDQLYHQWLOLLQWODþQLFHYQL
ILWLQJL]DQHSLWQRLQSLWQRYRGR=DKWHYH]DNDNRYRVWLQSUHVNXãDQMH ,62
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe
fittings for untreated and potable water supply - Quality requirements and testing (ISO
11177:2016)
Emails und Emaillierungen - Innen- und außenemaillierte Armaturen und
Druckrohrformstücke für die Roh- und Trinkwasserversorgung - Qualitätsanforderungen
und Prüfung (ISO 11177:2016)
Émails vitrifiés et de porcelaine - Robinetterie émaillée à l'intérieur et à l'extérieur et
raccords de tuyauterie pour conduites forcées destinées à l'alimentation en eau non
traitée et en eau potable - Exigences de qualité et essais (ISO 11177:2016)
Ta slovenski standard je istoveten z: EN ISO 11177:2016
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
25.220.50 Emajlne prevleke Enamels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11177
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 25.220.50; 91.140.60
English Version
Vitreous and porcelain enamels - Inside and outside
enamelled valves and pressure pipe fittings for untreated
and potable water supply - Quality requirements and
testing (ISO 11177:2016)
Émaux vitrifiés - Robinetterie émaillée à l'intérieur et à Emails und Emaillierungen - Innen- und
l'extérieur et raccords de tuyauterie pour conduites außenemaillierte Armaturen und
forcées destinées à l'alimentation en eau non traitée et Druckrohrformstücke für die Roh- und
en eau potable - Exigences de qualité et essais (ISO Trinkwasserversorgung - Qualitätsanforderungen und
11177:2016) Prüfung (ISO 11177:2016)
This European Standard was approved by CEN on 23 January 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11177:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11177:2016) has been prepared by Technical Committee CEN/TC 262 “Metallic
and other inorganic coatings” the secretariat of which is held by BSI, in collaboration with Technical
Committee ISO/TC 107 “Metallic and other inorganic coatings”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11177:2016 has been approved by CEN as EN ISO 11177:2016 without any modification.
INTERNATIONAL ISO
STANDARD 11177
First edition
2016-02-15
Vitreous and porcelain enamels —
Inside and outside enamelled
valves and pressure pipe fittings for
untreated and potable water supply —
Quality requirements and testing
Émaux vitrifiés — Robinetterie émaillée à l’intérieur et à l’extérieur
et raccords de tuyauterie pour conduites forcées destinées à
l’alimentation en eau non traitée et en eau potable — Exigences de
qualité et essais
Reference number
ISO 11177:2016(E)
©
ISO 2016
ISO 11177:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 11177:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
5 Quality requirements and testing procedures . 2
5.1 Enamelling surface quality . 2
5.2 Coat thickness . 2
5.3 Hardness . 2
5.4 Resistance to thermal shock . 2
5.5 Corrosion resistance to water and steam . 2
5.6 Corrosion resistance to citric acid . 3
5.7 Corrosion and chemical resistance to acid soil . 3
5.8 Corrosion and chemical resistance to sub-surface migration of enamel after impact test . 3
5.9 Corrosion resistance after scratch damage . 3
5.10 Corrosion resistance after abrasion damage . 4
5.11 Resistance to climatic exposure and ultraviolet radiation . 4
5.12 Physiological harmlessness . 4
6 Test report . 4
Bibliography . 6
ISO 11177:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 11177 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 262, Metallic and other inorganic coatings, in collaboration with Technical Committee
ISO/TC 107, Metallic and other inorganic coatings, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
iv © ISO 2016 – All rights reserved
ISO 11177:2016(E)
Introduction
The requirements defined in this International Standard regarding the product quality of enamelled
valves and pressure pipe fittings for untreated and potable water supply take into account the real
stress conditions to which a component can be subjected in the course of its operating life. Typical
types of stress are:
— during storage: climate, UV radiation, mechanical stress;
— during transportation: mechanical stress e.g. at certain points (impact), laterally (friction);
— during preparation for installation: cleaning agents, mechanical stress e.g. at certain points (impact),
laterally (friction);
— during installation: mechanical stress;
— during operation: abrasion caused by the carried medium, corrosion from surrounding medium,
mechanical stress from shifting ground loads, UV radiation with valves built in above ground.
INTERNATIONAL STANDARD ISO 11177:2016(E)
Vitreous and porcelain enamels — Inside and
outside enamelled valves and pressure pipe fittings
for untreated and potable water supply — Quality
requirements and testing
1 Scope
This International Standard specifies the requirements for product quality and product testing of
enamelled valves and pressure pipe fittings for untreated and potable water supply. It is not applicable
for chemical service glass-enamel and apparatus enamel.
2 Normative ref
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.