EN 15869-2:2019
(Main)Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.
Fahrzeuge der Binnenschifffahrt - Elektrischer Landanschluss, Drehstrom 400 V, 50 Hz, bis 125 A - Teil 2: Landseitiger Teil, zusätzliche Anforderungen
Dieses Dokument gilt in Verbindung mit EN 15869 1 für die landseitige Versorgung von stillliegenden Fahrzeugen der Binnenschifffahrt mit elektrischer Energie.
Dieses Dokument legt zusätzliche Anforderungen an den landseitigen Teil des elektrischen Landanschlusses fest.
Bateaux de navigation intérieure - Connexion au réseau électrique terrestre, courant triphasé 400 V, 125 A maximum, 50 Hz - Partie 2 : Unité terrestre, exigences supplémentaires
Le présent document s’applique conjointement avec l’EN 15869-1 pour l’alimentation en énergie électrique de bateaux de navigation intérieure à l’arrêt.
Le présent document spécifie des exigences supplémentaires concernant l’unité terrestre de la connexion au réseau électrique terrestre.
Plovila za celinske vode - Električne povezave s kopnim, trifazni tok 400 V, 50 Hz, do 125 A - 2. del: Kopenska enota, dodatne zahteve
Ta dokument se uporablja v povezavi s standardom EN 15869-1 za napajanje privezanih plovil za celinske vode z električno energijo.
Ta del standarda EN 15869 določa dodatne zahteve za kopensko enoto električne povezave s kopnim.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN 15869-2:2010
Plovila za celinske vode - Električne povezave s kopnim, trifazni tok 400 V, 50 Hz,
do 125 A - 2. del: Kopenska enota, dodatne zahteve
Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50
Hz, up to 125 A - Part 2: On-shore unit, additional requirements
Fahrzeuge der Binnenschifffahrt - Elektrischer Landanschluss, Drehstrom 400 V, 50 Hz,
bis 125 A - Teil 2: Landseitiger Teil, zusätzliche Anforderungen
Bateaux de navigation intérieure - Connexion au réseau électrique terrestre, courant
triphasé 400 V, à 125 A, 50 Hz - Partie 2 : Unité terrestre, exigences supplémentaires
Ta slovenski standard je istoveten z: EN 15869-2:2019
ICS:
47.020.60 Električna oprema ladij in Electrical equipment of ships
konstrukcij na morju and of marine structures
47.060 Jezerska in rečna plovila Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15869-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 29.120.30; 47.020.60; 47.060; 93.140 Supersedes EN 15869-2:2010
English Version
Inland navigation vessels - Electrical shore connection,
three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-
shore unit, additional requirements
Bateaux de navigation intérieure - Connexion au réseau Fahrzeuge der Binnenschifffahrt - Elektrischer
électrique terrestre, courant triphasé 400 V, 125 A Landanschluss, Drehstrom 400 V, 50 Hz, bis 125 A -
maximum, 50 Hz - Partie 2 : Unité terrestre, exigences Teil 2: Landseitiger Teil, zusätzliche Anforderungen
supplémentaires
This European Standard was approved by CEN on 22 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15869-2:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Lighting . 7
4.3 Mechanical and environmental requirements . 7
4.4 Electrical safety . 7
4.5 Operating instructions . 7
4.6 Other provisions . 8
5 Designation. 8
6 Marking . 8
Bibliography . 9
Figures
Figure 1 — Block diagram of an electrical power-supply station with one shore connection
unit . 6
European foreword
This document (EN 15869-2:2019) has been prepared by Technical Committee CEN/TC 15 “Inland
navigation vessels”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15869-2:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
A list of all parts in the EN 15869 series, published under the general title Inland navigation vessels —
Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A, can be found on the CEN-
CENELEC website.
The main changes compared to the previous edition are as follows:
— the maximum operating current has been increased up to 125 A;
— the title has been changed accordingly;
— the scope has been changed;
— Terms and definitions have been moved to Part 1;
— Clause 4 has been renamed "Requirements" and divided into four sub clauses;
— Clause 4.5 “Operating instructions” has been added and aligned with requirements of EN 16840;
— requirements for documentation and instructions for use have been added;
— figures have been improved;
— former Clause 7 “Manufacturer’s declaration of conformity” has been removed;
— entries in Bibliography have been moved to Part 1 of EN 15869.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Introduction
Inland navigation vessels are equipped with a variety of electrical loads operating at 230 V or 400 V.
While underway,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.