EN 14584:2005

Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources

This European Standard specifies the method for conducting acoustic emission (AE) + testing of metallic pressure equipment during acceptance pressure testing using a planar location method. General principles of acoustic emissions are described in EN 13554.
The objectives of the AE testing are to provide 100 % volumetric testing to define regions of the structure, which are acoustically active with burst type AE e.g. as a result of sub-critical flaw evolution; thus increasing the reliability of the acceptance test. The test provides a reference map for comparison with results of future tests.

Zerstörungsfreie Prüfung - Schallemissionsprüfung - Prüfung von metallischen Druckgeräten während der Abnahmeprüfung - Planare Ortung von Schallemissionsquellen

Dieses Dokument legt die Methode zur Durchführung einer Schallemissionsprüfung (AT) an metallischen
Druckgeräten während der Druck-Abnahmeprüfung unter Anwendung der planaren Ortung fest. Allgemeine
Grundlagen der Schallemission sind in EN 13554 beschrieben.
Das Ziel der Schallemissionsprüfung ist eine 100 % Volumenprüfung, um jene Regionen in der Struktur zu
bestimmen, die als Folge von subkritischem Fehlerwachstum aktive, transiente Schallemission aufweisen,
was die Zuverlässigkeit der Abnahmeprüfung erhöht. Die Prüfung ergibt Referenzdaten für den Vergleich mit
den Ergebnissen späterer Prüfungen.

Essais non destructifs - Emission acoustique - Vérification des équipements métalliques sous pression pendant l'épreuve - Localisation planaire des sources d'EA

La présente Norme européenne prescrit la méthode à utiliser pour effectuer le contrôle par émission acoustique (EA) des équipements métalliques sous pression, pendant l'épreuve en pression réalisée lors de leur réception, à l'aide de la méthode de localisation planaire. Les principes généraux de l'émission acoustique sont décrits dans l'EN 13554.
Le contrôle par EA a pour objectif d'assurer une vérification volumétrique à 100 % en vue de définir les zones acoustiquement actives de la structure grâce au mesurage des émissions acoustiques en salves, c'est-à-dire celles qui résultent de la propagation sous-critique des défauts. Il permet ce faisant d'améliorer la fiabilité de l'essai de réception. L'essai fournit une cartographie de référence permettant la comparaison avec les résultats des contrôles futurs.

Neporušitveno preiskušanje – Akustična emisija – Pregled kovinskih tlačnih naprav med preskušanjem – Ravninska namestitev virov akustične emisije

General Information

• Status: Withdrawn
• Publication Date: 30-Aug-2005
• Withdrawal Date: 30-Apr-2013
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 77.040.20 - Non-destructive testing of metals
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 7 - Acoustic emission testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2013
• Completion Date: 01-May-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 14584:2005 - Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources

Relations

• Replaced By: EN 14584:2013 - Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14584:2005
01-november-2005
1HSRUXãLWYHQRSUHLVNXãDQMH±$NXVWLþQDHPLVLMD±3UHJOHGNRYLQVNLKWODþQLK
QDSUDYPHGSUHVNXãDQMHP±5DYQLQVNDQDPHVWLWHYYLURYDNXVWLþQHHPLVLMH
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment
during proof testing - Planar location of AE sources
Zerstörungsfreie Prüfung - Schallemissionsprüfung - Prüfung von metallischen
Druckgeräten während der Abnahmeprüfung - Planare Ortung von
Schallemissionsquellen
Essais non destructifs - Emission acoustique - Vérification des équipements métalliques
sous pression pendant l'épreuve - Localisation planaire des sources d'EA
Ta slovenski standard je istoveten z: EN 14584:2005
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN 14584:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14584:2005

---------------------- Page: 2 ----------------------

SIST EN 14584:2005
EUROPEAN STANDARD
EN 14584
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 17.140.20; 77.040.20

English Version
Non-destructive testing - Acoustic emission - Examination of
metallic pressure equipment during proof testing - Planar
location of AE sources
Essais non destructifs - Emission acoustique - Vérification Zerstörungsfreie Prüfung - Schallemissionsprüfung -
des équipements métalliques sous pression pendant Prüfung von metallischen Druckgeräten während der
l'épreuve - Localisation planaire des sources d'EA Abnahmeprüfung - Planare Ortung von
Schallemissionsquellen
This European Standard was approved by CEN on 8 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14584:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14584:2005
EN 14584:2005 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Personnel qualification .4
5 Test method.4
5.1 General.4
5.2 Application of load.5
5.3 Sensors.5
5.4 Location .5
5.5 Preliminary information .5
5.6 Written
...