prEN ISO 4063

Welding, brazing, soldering, cutting, mechanical joining and adhesive bonding - Nomenclature of processes and reference numbers (ISO/DIS 4063:2020)

Schweißen, Hartlöten, Weichlöten, Schneiden, Mechanisches Fügen und Kleben - Liste der Prozesse und Ordnungsnummern (ISO/DIS 4063:2020)

Diese Internationale Norm legt Ordnungsnummern fest für
- Schweißen,
- Hartlöten, Weichlöten und Fugenlöten,
- thermisches Schneiden,
- mechanisches Fügen,
- Kleben,
wobei jedes Verfahren durch eine Ordnungsnummer gekennzeichnet ist. Dieses Dokument ist für alle Werkstoffe anwendbar, bei denen die Fügeverfahren geeignet sind.
ANMERKUNG Zusätzlich zu den Begriffen in Englisch und Französisch, zwei der drei offiziellen ISO-Sprachen, gibt diese Internationale Norm die entsprechenden Begriffe in Deutsch an; diese werden unter der Verantwortung des Mitgliedsorgans für Deutschland (DIN) veröffentlicht. Allerdings können nur die in den offiziellen Sprachen angegebenen Begriffe als ISO-Begriffe betrachtet werden.

Soudage, brasage, coupage, assemblage mécanique et collage - Nomenclature et numérotation des procédés (ISO/DIS 4063:2020)

Varjenje, trdo in mehko spajkanje, rezanje, spajanje z mehansko energijo ter lepljenje - Seznam postopkov in številčne oznake (ISO/DIS 4063:2020)

General Information

• Status: Not Published
• ICS: 01.040.25 - Manufacturing engineering (Vocabularies)
• ICS: 25.160.01 - Welding, brazing and soldering in general
• Technical Committee: CEN/TC 121 - Welding
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Due Date: 10-Mar-2021
• Completion Date: 10-Mar-2021
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: oSIST prEN ISO 4063:2021 - Welding, brazing, soldering, cutting, mechanical joining and adhesive bonding - Nomenclature of processes and reference numbers (ISO/DIS 4063:2020)

RELATIONS

• Revised: EN ISO 4063:2009 - Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009)
• Effective Date: 08-Jun-2022

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 4063:2021
01-februar-2021
Varjenje in sorodni postopki - Seznam postopkov in številčne oznake (ISO/DIS
4063:2020)
Welding, brazing, soldering, cutting, mechanical joining and adhesive bonding -
Nomenclature of processes and reference numbers (ISO/DIS 4063:2020)

Schweißen, Hartlöten, Weichlöten, Schneiden, Mechanisches Fügen und Kleben - Liste

der Prozesse und Ordnungsnummern (ISO/DIS 4063:2020)
Soudage, brasage, coupage, assemblage mécanique et collage - Nomenclature et
numérotation des procédés (ISO/DIS 4063:2020)
Ta slovenski standard je istoveten z: prEN ISO 4063
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN ISO 4063:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4063:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 4063:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4063
ISO/TC 44/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-12-16 2021-03-10
Welding, brazing, soldering, cutting, mechanical joining
and adhesive bonding — Nomenclature of processes and
reference numbers
ICS: 01.040.25; 25.160.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4063:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Designation ................................................................................................................................................................................................................ 1

4.1 General ........................................................................................................................................................................................................... 1

4.2 Hybrid joining .......................................................................................................................................................................................... 2

4.3 Combined joining (Combination of joining processes) ........................................................................................ 2

5 List of processes and reference numbers ................................................................................................................................... 2

5.1 General ........................................................................................................................................................................................................... 2

5.2 Welding .......................................................................................................................................................................................................... 2

5.3 Thermal cutting ...................................................................................................................................................................................... 8

5.4 Brazing, soldering and weld brazing .................................................................................................................................... 9

5.5 Mechanical joining ............................................................................................................................................................................10

5.6 Adhesive bonding ..............................................................................................................................................................................12

Annex A (normative) Process variants ............................................................................................................................................................14

Annex B (informative) Replaced and obsolete processes ............................................................................................................16

Annex C (informative) Acronyms for welding and allied processes commonly used in the USA ........17

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,

Subcommittee SC 7, Representation and terms.

This fifth edition cancels and replaces the fourth edition (ISO 4063:2009), which has been technically

revised.
The main changes compared to the previous edition are as follows:

— addition of processes for welding (thermal joining) of plastics, for mechanical joining and for

adhesive bonding,

Any feedback, question or request for official interpretation related to any aspect of this document

should be directed to the Secretariat of ISO/TC 44/SC 7 via your national standards body. A complete

listing of these bodies can be found at www .iso .org/ members .html. Official interpretations, where they

exist, are available from this page: https:// committee .iso .org/ sites/ tc44/ home/ interpretation .html.

iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
Introduction

In the previous editions of this document, the numbering system only covered processes for welding,

weld brazing, brazing, soldering, cutting and gouging. This allowed the use of a three-digits numbering

system, where one digit corresponds to a main process (e.g.: "1 Arc welding"), two digits to a sub-

process (e.g.: "11 Metal arc welding without gas protection"), and three digits to a sub-sub-process (e.g.:

"111 Manual metal arc welding").

The main change in this fifth edition is the incorporation of processes and reference numbers for

welding (thermal joining) of plastics, for mechanical joining and for adhesive bonding.

Because of the intrinsic limits of the three-digits system, it became necessary to adopt a four-digits

system, where the first digit corresponds to the main type of technology (i.e.: 1xxx for mechanical

joining and 2xxx for adhesive bonding), and the three following digits to the main process, sub-

processes and sub-sub-processes.

However, since any change of a given existing process and reference number can have a very strong and

negative impact in the industry, it was decided to keep the three-digits numbering system for all the

processes already covered in previous editions.
© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 4063:2021
---------------------- Page: 8 ----------------------
oSIST prEN ISO 4063:2021
DRAFT INTERNATIONAL STANDARD ISO/DIS 4063:2020(E)
Welding, brazing, soldering, cutting, mechanical joining
and adhesive bonding — Nomenclature of processes and
reference numbers
1 Scope
This International Standard establishes a nomenclature for
― welding;
― brazing, soldering and weld brazing;
― thermal cutting;
― mechanical joining;
― adhesive bonding;

with each process identified by a reference number. This document is applicable for all materials where

the joining processes are appropriate.

NOTE In addition to terms in English and French, two of the three official ISO languages, this International

Standard gives the equivalent terms in German; these are published under the responsibility of the member body

for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.

2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Designation
4.1 General

Where a full designation is required for a joining process, it shall have the following structure: the

number of this International Standard (i.e. “ISO 4063”), separated by a hyphen from the reference

number of the process, as shown in these examples.
EXAMPLE 1 Process 48 “Cold pressure welding” is designated as:
ISO 4063 – 48

EXAMPLE 2 Process “Radio frequency welding” with reference number 62 is designated as:

ISO 4063 – 62
© ISO 2020 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
EXAMPLE 3 Process “Blind riveting” with reference number 1120 is designated as:
ISO 4063 – 1120

EXAMPLE 4 Process “Adhesive bonding with cold-curing 2C silicones” with reference number 2312 is

designated as:
ISO 4063 – 2312

EXAMPLE 5 Process “Heated wedge welding with hot gas” with reference number 662-A is designated as:

ISO 4063 – 662-A
4.2 Hybrid joining

When multiple processes are used simultaneously in one process area, the processes shall be described

using the designations for each process separated by the symbol “+”.

EXAMPLE Process “Gas laser welding” (reference number 522) together with process “Plasma arc welding”

(reference number 15) is designated as:
ISO 4063 – 522+15
4.3 Combined joining (Combination of joining processes)

When multiple processes are combined sequentially in one process area, the processes shall be

described using the designations for each process separated by the symbol “>”.

EXAMPLE Process “Self-piercing riveting” (reference number 1110) followed by process “Resistance spot

welding” (reference number 21) is designated as:
ISO 4063 – 1110>21
5 List of processes and reference numbers
5.1 General

The first term listed is the preferred term and any subsequent terms are synonyms. US terms are shown

for information where there are differences.
Annex A provides supplementary options for process variants.
Annex B provides an overview for replaced and obsolete processes.

Annex C provides a list of commonly used acronyms and abbreviations for the welding processes in the

USA included in this International Standard.
5.2 Welding
1 Arc welding
11 Metal arc welding without gas protection
111 Manual metal arc welding
Shielded metal arc welding, USA

1) Due to historic reasons (see Introduction) the reference numbers for welding, thermal cutting, brazing, soldering

and weld brazing do not have a first digit corresponding to the main type of technology, as "1xxx" for mechanical

joining or "2xxx" for adhesive bonding.
2 © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 4063:2021
ISO/DIS 4063:2020(E)
112 Gravity welding
Gravity arc welding with covered electrode
Gravity feed welding, USA
114 Self-shielded tubular cored arc welding
12 Submerged arc welding
121 Submerged arc welding with solid wire electrode
122 Submerged arc welding with strip electrode
124 Submerged arc welding with metal powder addition
125 Submerged arc welding with tubular cored electrode
126 Submerged arc welding with cored strip electrode
13 Gas-shielded metal arc welding
Metal inert gas (MIG) welding/ Metal active gas (MAG) welding
Gas metal arc welding (GMAW), USA
131 MIG welding with solid wire electrode
GMAW using inert gas and solid wire electrode, USA
132 MIG welding with flux cored electrode
Gas shielded flux cored arc welding, USA
133 MIG welding with metal cored electrode
GMAW using inert gas and metal cored wire, USA
135 MAG welding with solid wire electrode
GMAW using active gas with solid wire electrode, USA
136 MAG welding with flux cored electrode
GMAW using active gas and flux cored electrode, USA
138 MAG welding with metal cored electrode
GMAW using active gas and metal cored electrode, USA
14 Gas-shielded arc welding with non-consumable tungsten electrode
Tungsten inert gas (TIG) welding/Tungsten active gas (TAG) welding
Gas tungsten arc welding (GTAW), USA
141 TIG welding with solid filler material
GTAW using inert gas and solid filler material, USA
142 Autogenous TIG welding
Autogenous gas tungsten arc welding using inert gas, USA
143 TIG welding with tubular cored filler material
GTAW using inert gas and tubular cored filler mat
...