EN 61427:2005

Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test

This International Standard gives general information relating to the requirements of the secondary batteries used in photovoltaic energy systems (PVES) and to the typical methods of test used for the verification of battery performances. This International Standard does not include specific information relating to battery sizing, method of charge or PVES design.

Wiederaufladbare Zellen und Batterien für photovoltaische Energiesysteme - Allgemeine Anforderungen und Prüfverfahren

Accumulateurs pour les systèmes photovoltaïques (SPV) - Exigences générales et méthodes d'essais

La présente Norme internationale donne des informations générales relatives aux exigences applicables aux accumulateurs utilisés dans les systèmes photovoltaïques (SPV) et aux méthodes d'essais spécifiques utilisées pour la vérification des performances de l'accumulateur. Cette Norme internationale ne contient pas d'informations spécifiques relatives aux dimensions des accumulateurs, aux méthodes de charge ou à la conception des systèmes photovoltaïques.

Sekundarni členi in baterije za fotovoltaične energijske sisteme – Splošne zahteve in metode preskušanja (IEC 61427:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Aug-2005
• Withdrawal Date: 30-Jun-2008
• ICS: 27.160 - Solar energy engineering
• ICS: 29.220.20 - Acid secondary cells and batteries
• Technical Committee: CLC/TC 21X - Secondary cells and batteries
• Drafting Committee: IEC/TC 21 - IEC_TC_21
• Parallel Committee: IEC/TC 21 - IEC_TC_21
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-May-2016
• Completion Date: 28-May-2016
• Ref Project: SIST EN 61427:2006 - Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test

Relations

• Replaces: EN 61427:2001 - Secondary cells and batteries for solar photovoltaic energy systems - General requirements and methods of test
• Effective Date: 29-Jan-2023
• Replaced By: EN 61427-1:2013 - Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SIST EN 61427:2006SLOVENSKIjanuar 2006
STANDARD(istoveten EN 61427:2005)6HNXQGDUQLþOHQLLQEDWHULMH]DIRWRYROWDLþQHHQHUJLMVNHVLVWHPH±6SORãQHzahteve in metode preskušanja (IEC 61427:2005)Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test (IEC 61427:2005) !#"$%&'& *+5HIHUHQþQDãWHYLONDSIST EN 61427:2006(en)ICS27.160; 29.220.20







EUROPEAN STANDARD
EN 61427 NORME EUROPÉENNE EUROPÄISCHE NORM
August 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61427:2005 E
ICS 29.220.20; 27.160 Supersedes EN 61427:2001
English version
Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test (IEC 61427:2005)
Accumulateurs pour les systèmes photovoltaïques (SPV) –
Exigences générales et méthodes d'essais (CEI 61427:2005)
Solarzellen und -batterien für photovoltaische Energiesysteme - Allgemeine Anforderungen und Prüfverfahren (IEC 61427:2005)
This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 61427:2005 - 2 - Foreword The text of document 21/621/FDIS, future edition 2 of IEC 61427, prepared by IEC TC 21, Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61427 on 2005-07-01. This European Standard supersedes EN 61427:2001. This European Standard is a restructuring of EN 61427:2001, clarifying the different clauses with regard to conditions of use, general requirements, functional characteristics, general tests conditions, test method and recommended use of tests, the aim being to ensure a better understanding by the end user. The test method is clearly explained in detail for both technologies: lead-acid and nickel-cadmium. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-07-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61427:2005 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 61427:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication
Year Title EN/HD Year IEC 60050-482 - 1) International Electrotechnical VocabularyPart 482: Primary and secondary cells and batteries
- - IEC 60622 - 1) Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
EN 60622 2003 2) IEC 60623 - 1) Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
EN 60623 2001 2) IEC 60721-1 - 1) Classification of environmental conditionsPart 1: Environmental parameters and their severities
EN 60721-1 1995 2) IEC 60896-11 - 1) Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests
EN 60896-11 2003 2) IEC 60896-21 - 1) Part 21: Valve regulated types - Methods of test
EN 60896-21 2004 2) IEC 61056-1 - 1) General purpose lead-acid batteries (valve regulated types) Part 1: General requirements
...