IEC 60297-3-110:2018
(Main)Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses
IEC 60297-3-110:2018 specifies dimensions, specification for installation, environmental aspects and safety aspect of residential racks and cabinets based on IEC 60297 series, for smart houses, likely to be part of smart cities.
Key words: Racks, Residential, Cabinets, Smart house
Structures mécaniques pour équipements électriques et électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-110: Bâtis et baies domestiques pour maisons intelligentes
IEC 60297-3-110:2018 définit des spécifications d’installation et spécifie les dimensions, aspects liés à environnement et aspects liés à la sécurité des bâtis et baies domestiques sur la base de la série IEC 60297, pour les maisons intelligentes susceptibles de faire partie intégrante de villes intelligentes.
Mots clés: bâtis, baies domestiques, maisons intelligentes
Overhead lines – Characteristcs of greases for aluminium, aluminium alloy and steel bare conductors
General Information
Standards Content (Sample)
IEC 60297-3-110 ®
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electrical and electronic equipment – Dimensions of
mechanical structures of the 482,6 mm (19 in) series –
Part 3-110: Residential racks and cabinets for smart houses
Structures mécaniques pour équipements électriques et électroniques –
Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) –
Partie 3-110: Bâtis et baies domestiques pour maisons intelligentes
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.
IEC 60297-3-110 ®
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electrical and electronic equipment – Dimensions of
mechanical structures of the 482,6 mm (19 in) series –
Part 3-110: Residential racks and cabinets for smart houses
Structures mécaniques pour équipements électriques et électroniques –
Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) –
Partie 3-110: Bâtis et baies domestiques pour maisons intelligentes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.240 ISBN 978-2-8322-5905-4
– 2 – IEC 60297-3-110:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Arrangement overview . 7
5 Dimensions. 8
5.1 Dimensions for residential racks . 8
5.2 Dimensions for residential cabinets . 10
6 Equipment categories and the relevant mounting locations . 11
7 Installation and fixing position . 12
7.1 Installation . 12
7.1.1 Installation of residential racks . 12
7.1.2 Installation of residential cabinets . 13
7.2 Fixing positions . 13
8 Environmental aspects . 15
8.1 General . 15
8.2 Environmental protection performance level . 15
9 Safety aspects . 15
Annex A (informative) Application examples of the residential rack and cabinet for
smart houses under local construction regulations . 16
A.1 Applications of residential racks and cabinets for smart houses under local
construction regulations or guides . 16
A.2 An application example of the residential rack under a local construction
regulation . 16
A.3 An application example of the residential cabinet under a local home-
network construction guide . 17
Figure 1 – Example of a residential rack arrangement for a smart house . 7
Figure 2 – Example of a residential cabinet arrangement for a smart house . 8
Figure 3 – Dimensions of residential racks . 9
Figure 4 – Dimensions of residential cabinets . 10
Figure 5 – Typical equipment categories and their mounting locations of a 2 000 mm
high (40U) residential rack or cabinet . 12
Figure 6 – Fixing positions of residential racks or cabinets. 14
Figure A.1 – An application example of the residential rack under a local construction
regulation . 17
Figure A.2 – An application example of the residential cabinet under a local home-
network construction guide . 18
Table 1 – Dimensions of residential racks . 9
Table 2 –Dimensions of residential cabinets . 11
Table 3 – Environmental protection performance level . 15
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR
ELECTRICAL AND ELECTRONIC EQUIPMENT –
DIMENSIONS OF MECHANICAL STRUCTURES
OF THE 482,6 MM (19 IN) SERIES –
Part 3-110: Residential racks and cabinets for smart houses
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage o
...
SLOVENSKI STANDARD
01-november-1999
Overhead lines – Characteristcs of greases for aluminium, aluminium alloy and
steel bare conductors
Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel
bare conductors
Lignes aériennes - Caractéristiques des produits de protection pour conducteurs nus en
aluminium, en alliage d'aluminium ou en acier
Ta slovenski standard je istoveten z: IEC/TS 61394
ICS:
29.060.20 Kabli Cables
29.240.20 Daljnovodi Power transmission and
distribution lines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.