SIST EN 60335-2-60:2003
(Main)Household and similar electrical appliances - Safety -- Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
Household and similar electrical appliances - Safety -- Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
Deals with the safety of electric whirlpool baths for indoor use, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. Appliances not intended for normal household use, such as appliances intened to be used by layman in hotels, fitness centers and similar places, are within the scope of this standard.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-60: Besondere Anforderungen für Sprudelbadgeräte und Sprudelbäder
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-60: Règles particulières pour les spas et les baignoires à système de brassage d'eau
Traite de la sécurité des baignoires à système de brassage d'eau électriques pour utilisation à l'intérieur, pour usages domestiques et analogues, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Les appareils qui ne sont pas destinés à un usage domestique normal, tels que les appareils destinés à être utilisés par des usagers non avertis dans des hôtels, des centres de remise en forme et lieux analogues, relèvent du domaine d'application de la présente norme.
Gospodinjski in podobni električni aparati - Varnost - 2-60. del: Posebne zahteve za vrtinčne kopeli (IEC 60335-2-60:2002)
Obravnava varnost električnih kadi za notranjo uporabo, za gospodinjstva in podobne namene, katerih napetost je manjša od 250 V za enofazne aparate in od 440 V za ostale aparate. Ta standard prav tako velja za aparate za kroženje zraka ali vode v konvencionalnih kadeh. Aparati, ki niso namenjeni običajni uporabi v gospodinjstvu, kot naprave namenjene uporabi laikov v hotelih, fitnes centrih in podobnih mestih, so v okviru področja uporabe tega standarda.
General Information
- Status
- Published
- Publication Date
- 30-Nov-2003
- Technical Committee
- VGA - Safety of household and similar electrical appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
Relations
- Effective Date
- 07-Jun-2022
- Effective Date
- 24-Jul-2018
- Effective Date
- 01-Mar-2011
- Effective Date
- 21-Sep-2010
- Effective Date
- 21-Sep-2010
- Effective Date
- 21-Sep-2010
- Effective Date
- 13-May-2010
Overview
EN 60335-2-60:2003 (CLC adoption of IEC 60335-2-60) is the European safety standard for whirlpool baths and whirlpool spas intended for indoor household and similar use. It covers electrical safety for appliances with rated voltages up to 250 V for single‑phase installations and up to 480 V for other appliances. The standard also applies to circulating-air or circulating‑water appliances used with conventional baths and includes appliances used by laypersons in hotels, fitness centres and similar premises.
This Part 2 standard is a supplement to EN 60335-1 (Household and similar electrical appliances - General requirements) and must be applied together with Part 1. It implements the safety objectives of the Low Voltage Directive and aligns with relevant aspects of the Machinery Directive where electrical hazards predominate.
Key topics and technical requirements
EN 60335-2-60 focuses on appliance safety through design, testing and documentation. Key technical topics include:
- Electrical protection: leakage current limits, electric strength at operating temperature, transient overvoltages and insulation requirements.
- Earthing and supply connections: requirements for protective earthing, terminals, external flexible cords and plugs.
- Motor and control safety: starting of motor‑operated parts, overload protection and motor endurance.
- Thermal and fire safety: heating limits, resistance to heat and fire, and materials selection.
- Moisture and corrosion resistance: moisture resistance tests and resistance to rusting for bath components.
- Mechanical safety: stability, mechanical strength, guards against moving parts and prevention of mechanical hazards.
- Construction and components: internal wiring, component qualification, clearances and creepage distances, and resistance to radiation/toxicity.
- Abnormal operation and endurance: tests for fault conditions, durability and safe behaviour under foreseeable misuse.
Applications
This standard is used to:
- Ensure product safety for whirlpool baths and spas placed on the European market.
- Define test methods and pass/fail criteria for type testing and certification.
- Guide design and engineering decisions for manufacturers to reduce electrical, thermal and mechanical risks.
- Support compliance with regulatory requirements (e.g., Low Voltage Directive) and market approval.
Who should use this standard
- Appliance manufacturers and product designers (bath and spa equipment)
- Test and certification laboratories and conformity assessment bodies
- Safety and compliance engineers responsible for CE marking and product approvals
- Procurement and facility managers in hotels, spas and fitness centres specifying safe equipment
Related standards
- EN 60335-1 (General requirements for household and similar electrical appliances) - mandatory companion document.
- IEC 60335-2-60 (international edition) - the original technical basis adopted by CENELEC.
Keywords: EN 60335-2-60, whirlpool bath safety standard, whirlpool spas, electrical safety, household appliances standard, leakage current, earthing, CENELEC, IEC 60335-2-60, product compliance.
Frequently Asked Questions
SIST EN 60335-2-60:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety -- Part 2-60: Particular requirements for whirlpool baths and whirlpool spas". This standard covers: Deals with the safety of electric whirlpool baths for indoor use, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. Appliances not intended for normal household use, such as appliances intened to be used by layman in hotels, fitness centers and similar places, are within the scope of this standard.
Deals with the safety of electric whirlpool baths for indoor use, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. Appliances not intended for normal household use, such as appliances intened to be used by layman in hotels, fitness centers and similar places, are within the scope of this standard.
SIST EN 60335-2-60:2003 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 91.140.70 - Sanitary installations. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60335-2-60:2003 has the following relationships with other standards: It is inter standard links to SIST EN 60335-2-60:1998, SIST EN IEC 60335-2-60:2024, SIST EN 60335-2-60:2003/A12:2011, SIST EN 60335-2-60:2003/A2:2009, SIST EN 60335-2-60:2003/A11:2010, SIST EN 60335-2-60:2003/A1:2005, SIST EN 60335-2-60:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60335-2-60:2003 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 60335-2-60:2003 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2003
1DGRPHãþD
SIST EN 60335-2-60:1998
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO3RVHEQH]DKWHYH
]DYUWLQþQHNRSHOL,(&
Household and similar electrical appliances - Safety -- Part 2-60: Particular requirements
for whirlpool baths and whirlpool spas
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-60:
Besondere Anforderungen für Sprudelbadgeräte und Sprudelbäder
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-60: Règles particulières
pour les spas et les baignoires à système de brassage d'eau
Ta slovenski standard je istoveten z: EN 60335-2-60:2003
ICS:
13.120 Varnost na domu Domestic safety
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60335-2-60
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003
ICS 13.120; 97.170 Supersedes EN 60335-2-60:1997
English version
Household and similar electrical appliances –
Safety
Part 2-60: Particular requirements for whirlpool baths
(IEC 60335-2-60:2002)
Appareils électrodomestiques et Sicherheit elektrischer Geräte für den
analogues – Hausgebrauch und ähnliche Zwecke
Sécurité Teil 2-60: Besondere Anforderungen für
Partie 2-60: Règles particulières pour Sprudelbadgeräte
les baignoires à système de brassage (IEC 60335-2-60:2002)
d'eau
(CEI 60335-2-60:2002)
This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-60:2003 E
Foreword
The text of the International Standard IEC 60335-2-60:2002 (61/2223/FDIS), prepared by
IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved
by CENELEC as EN 60335-2-60 on 2003-05-01.
This European Standard replaces EN 60335-2-60:1997.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-05-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2006-05-01
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical
appliances – Safety – Part 1: General requirements. It was established on the basis of the 2002
edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and
the dates when such changes become applicable will be stated in the relevant amendment or revision
of Part 1.
This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into
the European Standard: Safety requirements for electric whirlpool baths.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as
is reasonable. When this standard states "addition", "modification" or "replacement", the relevant text
of Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
- additional annexes are lettered AA, BB, etc.;
- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated
noun are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version.
_____________
- 3 - EN 60335-2-60:2003
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown
that the risks are mainly of electrical origin and consequently this directive is not applicable. However,
the relevant essential safety requirements of the Machinery Directive are covered by this standard
together with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-60:2002 was approved by CENELEC as a
European Standard without any modification.
____________
NORME CEI
INTERNATIONALE
IEC
60335-2-60
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2002-11
Appareils électrodomestiques et analogues –
Sécurité –
Partie 2-60:
Règles particulières pour les baignoires
à système de brassage d'eau
Household and similar electrical appliances –
Safety –
Part 2-60:
Particular requirements for whirlpool baths
IEC 2005 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60335-2-60 IEC:2005 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references.11
3 Definitions.13
4 General requirement.13
5 General conditions for the tests .13
6 Classification.13
7 Marking and instructions.13
8 Protection against access to live parts.15
9 Starting of motor-operated appliances .15
10 Power input and current .15
11 Heating.17
12 Void .17
13 Leakage current and electric strength at operating temperature.17
14 Transient overvoltages .17
15 Moisture resistance.17
16 Leakage current and electric strength.17
17 Overload protection of transformers and associated circuits .17
18 Endurance.17
19 Abnormal operation.17
20 Stability and mechanical hazards .19
21 Mechanical strength .19
22 Construction.19
23 Internal wiring.21
24 Components.21
25 Supply connection and external flexible cords .23
26 Terminals for external conductors.23
27 Provision for earthing .23
28 Screws and connections .23
29 Clearances, creepage distances and solid insulation .23
30 Resistance to heat and fire.23
31 Resistance to rusting.25
32 Radiation, toxicity and similar hazards.25
Annexes .27
Bibliography.27
60335-2-60 IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-60: Particular requirements for whirlpool baths
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
This third edition cancels and replaces the second edition published in 1997. It constitutes a
technical revision.
This bilingual version (2005-09) replaces the English version.
The text of this this part of IEC 60335 is based on the following documents:
FDIS Report on voting
61/2223/FDIS 61/2298/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
60335-2-60 I
...
La norme SIST EN 60335-2-60:2003 est un document essentiel qui traite de la sécurité des appareils de bain à remous électriques destinés à un usage intérieur, ainsi que de leur application pour des usages domestiques et similaires. Cette norme précise que la tension nominale ne doit pas dépasser 250 V pour les appareils monophasés et 480 V pour d'autres types d'appareils, ce qui est critique pour garantir la sécurité des utilisateurs. L'un des points forts de cette norme est son approche exhaustive, qui couvre non seulement les bains à remous, mais également les appareils dédiés à la circulation d'air ou d'eau dans des baignoires conventionnelles. Cette inclusion élargit la portée de la norme, rendant ainsi son application pertinente pour divers scénarios d'utilisation domestique et commerciale. De plus, la norme s'applique également aux appareils qui ne sont pas nécessairement destinés à un usage normal dans les foyers, mais qui peuvent être utilisés par un public non professionnel dans des environnements tels que des hôtels, des centres de remise en forme et d'autres lieux similaires. Ce point renforce la pertinence de la norme pour un large éventail de contextes, assurant que même les utilisateurs occasionnels bénéficient de la sécurité appropriée lorsqu'ils utilisent ces appareils. En conclusion, la SIST EN 60335-2-60:2003 est une norme cruciale qui met l'accent sur la sécurité des appareils de bain à remous et assure un cadre de référence pour leur utilisation sécurisée dans différentes situations, ce qui en fait un document fondamental pour les fabricants, les distributeurs et les utilisateurs finaux.
Die Norm SIST EN 60335-2-60:2003 bietet einen umfassenden Rahmen zur Gewährleistung der Sicherheit von elektrischen Whirlpools und Whirlpools in ähnlichen Anwendungen. Der Anwendungsbereich dieser Norm ist klar und präzise definiert: Sie bezieht sich auf elektrische Whirlpool-Bäder, die für den Innenbereich gedacht sind, und deckt sowohl Haushaltsgeräte als auch ähnliche Geräte ab. Mit einer Nennspannung von maximal 250 V für einphasige Geräte und 480 V für andere Geräte, ist die Norm so gestaltet, dass sie die Sicherheit in üblichen Nutzungsszenarien gewährleistet. Ein wesentlicher Stärke dieser Norm ist der Fokus auf Sicherheit, insbesondere in Bezug auf die Verwendung von Geräten in Umgebungen, die möglicherweise von Laien genutzt werden, wie in Hotels oder Fitnesszentren. Die Berücksichtigung solcher Anwendungen reflektiert die zunehmende Nutzung von Whirlpools außerhalb des traditionellen Haushaltskontexts und verdeutlicht die lebenswichtige Relevanz dieser Norm. Darüber hinaus schließt die Norm auch Geräte ein, die zur Luft- oder Wasserzirkulation in herkömmlichen Bädern bestimmt sind. Dies erweitert den Anwendungsbereich und macht die Norm zu einem unerlässlichen Referenzpunkt für Hersteller und Anwender in der Branche. Die Norm fördert die Entwicklung von Geräten, die nicht nur funktional sind, sondern auch höchsten Sicherheitsansprüchen genügen. Die SIST EN 60335-2-60:2003 ist damit nicht nur ein notwendiges Dokument für die Einhaltung von Sicherheitsstandards, sondern auch ein entscheidendes Instrument zur Gewährleistung des Verbraucherschutzes in der Nutzung von elektrischen Whirlpools. Angesichts der wachsenden Beliebtheit solcher Geräte ist die Relevanz dieser Norm auch im Hinblick auf zukünftige Entwicklungen und Technologien in der Branche von großer Bedeutung.
SIST EN 60335-2-60:2003 표준은 실내에서 사용할 수 있는 전기용 풀 욕조 및 스파의 안전성을 다룹니다. 이 표준의 적용 범위는 가정용 및 유사한 용도로 사용되는 전기 풀 욕조에 대한 안전 요구 사항을 포함하며, 단상 기기의 경우 정격 전압이 250V 이하, 기타 기기는 480V 이하인 제품을 대상으로 합니다. 또한, 이 표준은 일반 욕조에서 공기나 물을 순환시키기 위한 기기도 포함됩니다. 이 표준의 강점은 전기 풀 욕조 및 스파의 안전성을 보장하는 데 있어 필수적인 요구 사항을 명확하게 제시한다는 점입니다. 제조업체가 준수해야 할 안전 기준이 명문화되어 있어, 소비자들이 보다 안전하게 전기 풀 욕조를 사용할 수 있도록 돕습니다. 특히 호텔, 피트니스 센터와 같이 일반 가정용이 아닌 환경에서 사용되는 기기도 해당 표준의 적용을 받는 점은 중요한 특징입니다. 이는 비전문 사용자에게도 안전한 사용 환경을 제공하기 위한 노력의 일환으로, 소비자에게 추가적인 신뢰감을 줄 수 있습니다. SIST EN 60335-2-60:2003 표준은 전기 풀 욕조 및 스파의 안전성을 확보하는 데 핵심적인 역할을 하며, 산업 전반에 걸쳐 높은 안전 기준을 유지하기 위해 매우 중요한 문서입니다. 이는 가정용 전기 기기의 안전성을 높이고, 소비자 보호를 강화하는 데 기여하는 매우 관련성이 높은 표준이라 할 수 있습니다.
SIST EN 60335-2-60:2003は、家庭用および類似の電気機器に関する重要な安全基準であり、特に電気浴槽およびジェットバスに関する特定の要件を定めています。この基準は、屋内における電気浴槽の安全性を確保することを目的としており、単相機器に対しては最大250 V、他の機器に対しては最大480 Vの定格電圧を対象としています。この標準は、従来の浴槽における空気または水の循環に関連する機器にも適用されます。 この標準の強みは、家庭での使用だけでなく、ホテルやフィットネスセンターなど、一般市民によって利用される非通常家庭用の器具も対象に含まれている点です。このような広範な適用範囲により、様々な環境において安全基準が一貫して守られることが保証されています。 また、SIST EN 60335-2-60:2003は、電気浴槽とジェットバスの使用に関連するリスクを特定し、具体的な安全要件を提供することで、ユーザーの安全を第一に考慮した基準となっています。これにより、製造者は製品の設計および製造時にこれらの安全要件を確実に考慮することが可能となります。 この基準は、業界全体に対して明確なガイドラインを示すものであり、消費者の安心感を高めるとともに、製品の品質向上にも寄与しています。家庭用電気機器の安全規格において、SIST EN 60335-2-60:2003は、その適用範囲の広さと具体的な要求事項により、非常に重要な役割を果たしていると言えます。
The SIST EN 60335-2-60:2003 standard is a crucial reference for ensuring the safety of household and similar electric whirlpool baths and whirlpool spas. Its scope is well-defined, focusing specifically on appliances designed for indoor use with rated voltages not exceeding 250 V for single-phase units and 480 V for three-phase installations. This clarity in scope is one of the strengths of this standard, as it delineates the exact conditions under which the safety requirements apply, ensuring that manufacturers, distributors, and users are all on the same page regarding safety protocols. A notable strength of this standard is its comprehensive approach to safety. It addresses various potential hazards associated with electric whirlpool baths, including those designed for not only personal use but also in settings such as hotels and fitness centers-environments where laypeople may interact with these appliances. This inclusion broadens the standard’s applicability and reinforces its relevance across multiple contexts beyond mere household use. Moreover, the standard's focus on appliances designed for circulating air or water in traditional baths further enhances its breadth. This aspect is particularly pertinent as it caters to innovations in bath technology, ensuring that emerging designs within the industry also adhere to rigorous safety requirements. In essence, the SIST EN 60335-2-60:2003 standard is a pivotal document that facilitates the safe use of electric whirlpool baths and whirlpool spas in domestic and similar settings. Its meticulous scope, strengths in comprehensive safety measures, and emphasis on diverse applications make it a relevant and vital contribution to electrical appliance safety standards in the market today.










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...