Standard data element types with associated classification scheme for electric components -- Part 1: Definitions - Principles and methods

Superseded by EN 61360-1:2010

Genormte Datenelementtypen mit Klassifikationsschema für elektrische Bauteile -- Teil 1: Definitionen - Regeln und Methoden

Types normalisés d'éléments de données avec plan de classification pour composants électriques -- Partie 1: Définitions - Principes et méthodes

Električni sestavni deli, standardni tipi elementov s pripadajočimi shematskimi simboli - 1. del: Definicije, načela in metode (IEC 61360-1:2002/A1:2003)

General Information

Status
Withdrawn
Publication Date
31-Oct-2004
Withdrawal Date
23-Nov-2010
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Nov-2010
Due Date
16-Dec-2010
Completion Date
24-Nov-2010

RELATIONS

Buy Standard

Amendment
SIST EN 61360-1:2003/A1:2004
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 61360-1:2003/A1:2004
STANDARD
november 2004
Električni sestavni deli, standardni tipi elementov s pripadajočimi
shematskimi simboli - 1. del: Definicije, načela in metode (IEC 61360-
1:2002/A1:2003)
Standard data element types with associated classification scheme for electric
components – Part 1: Definitions, principles and methods (IEC 61360-
1:2002/A1:2003)
ICS 01.040.29; 29.100.20 Referenčna številka
SIST EN 61360-1:2003/A1:2004(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61360-1/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 31.020
English version
Standard data element types with associated classification scheme
for electric components
Part 1: Definitions –
Principles and methods
(IEC 61360-1:2002/A1:2003)
Types normalisés d'éléments de données Genormte Datenelementtypen mit
avec plan de classification pour Klassifikationsschema für elektrische
composants électriques Bauteile
Partie 1: Définitions – Teil 1: Definitionen –
Principes et méthodes Regeln und Methoden
(CEI 61360-1:2002/A1:2003) (IEC 61360-1:2002/A1:2003)

This amendment A1 modifies the European Standard EN 61360-1:2002; it was approved by CENELEC

on 2004-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this amendment the status of a national standard without any

alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language

made by translation under the responsibility of a CENELEC member into its own language and notified to the

Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,

Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61360-1:2002/A1:2004 E
---------------------- Page: 2 ----------------------
EN 61360-1:2002/A1:2004 - 2 -
Foreword

The text of document 3D/120/FDIS, future amendment 1 to IEC 61360-1:2002, prepared by SC 3D,

Data sets for libraries, of IEC TC 3, Information structures, documentation and graphical symbols, was

submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to

EN 61360-1:2002 on 2004-03-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-12-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of amendment 1:2003 to the International Standard IEC 61360-1:2002 was approved by

CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61360-1:2002/A1:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Add:
Publication Year Title EN/HD Year
IEC 60191-4 1999 Mechanical standardization of EN 60191-4 1999
semiconductor devices
Part 4: Coding system and classification
into forms of package outlines for
semiconductor device packages
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD
61360-1
2002-02
AMENDMENT 1
2003-12
Amendment 1
Standard data element types with associated
classification scheme for electric components –
Part 1:
Definitions – Principles and methods
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

PRICE CODE
Commission Electrotechnique Internationale M
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 61360-1 Amend. 1  IEC:2003(E)
FOREWORD

This amendment has been prepared by subcommittee 3D: Data sets for libraries, of IEC

technical committee 3: Information structures, documentation and graphical symbols.

The text of this amendment is based on the following documents:
FDIS Report on voting
3D/120/FDIS 3D/127/RVD

Full information on the voting for the approval of this amendment can be found in the report

on voting indicated in the above table.

The committee has decided that the contents of the base publication and its amendments will

remain unchanged until 2005. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
_____________
Page 6
1.1 Scope and object
Delete, in the second paragraph, the final sentence:
Provision is also made for definition of the terms used in classification.
Page 7
1.3 Normative references
Insert the following normative reference:

IEC 60191-4:1999, Mechanical standardization of semiconductor devices – Part 4: Coding

system and classification into forms of package outlines for semiconductor device packages

---------------------- Page: 6 ----------------------
61360-1 Amend. 1  IEC:2003(E) – 3 –
Page 8
2 Definitions

Delete, on page 9, definition 2.15 and renumber the remaining definitions accordingly.

Add the following new definitions:
2.21
shape
external form of a component package as given by the set of data element types
2.22
outline style

physical information enclosing the apparently plane figure presented by any object to sight,

contour and/or external boundary of a component
2.23
package

term applied to an electric or electromechanical component which covers the physical outline

of the component, including terminals and any protective material or casing
2.24
drawing

a drawing illustrates the meaning of a group of data element types describing the geometrical

characteristics of a component
Page 13
3.2.2 Version number
Replace the existing list in the “Comments section” with the following new list:
– preferred name – short name
– preferred letter symbol – preferred name of condition
– component class – data element type
(see super/subclass
– value code
as described in figure 10)
– reference class identifier
– value meaning – note
3.2.3 Revision number

Replace the existing list in the “Comments” section with the following new list and sentence:

– synonymous name – source document of DET definition
– synonymous letter symbol – source document of value list
– remark – spelling error in the text of the definition
– data element type class – figure
–formula

The revision number shall be reset to the starting number 01 when the version number is

changed.
---------------------- Page: 7 ----------------------
– 4 – 61360-1 Amend. 1  IEC:2003(E)
Page 18
3.3.6 Source document of data element type definition
Add the following sentence to the third paragraph concerning Comments:
The value of this attribute shall have a maximum length of 80 characters
Page 19
Figure 5 – Attributes of the value list for data element type
Replace the existing Figure 5 by the following new Figure 5
value meaning
value code value
has
1.1
has 1.1
contains
2.n
derived 0.1
source document
VALUE LIST
of value list
IEC 2880/03
Figure 5 – Attributes of the value list for data element type
Page 22
3.4.2 Value format

Add, after the first sentence in the section marked “Comments”, the following new sentence:

The value of this attribute shall have a maximum length of 80 characters.
Page 23
3.4.4.1 Value
Delete the following sentence from the section marked “Comments”:
See also 6.4 for the relations between data element type, term and value
---------------------- Page: 8 ----------------------
61360-1 Amend. 1  IEC:2003(E) – 5 –
Page 24
3.4.4.2 Value code
In the section marked “Comments”, replace the second paragraph by:

The value code of a classifying (non-quantitative) data element type shall have a maximum

length of 18 alphanumeric characters.
Page 24
3.4.4.3 Value meaning

In the section marked “Comments”, replace the existing text by the following text:

for classifying data element types the value meaning shall be defined in the note attribute of

the class that has been defined by this classifying data element type.
The value of this attribute shall have a maximum length of 70 characters
Page 24
3.4.4.4 Source document of value list
Add the following section:

Comments: the value of this attribute shall have a maximum length of 80 characters

Page 24
3.4.5 Referenced class identifier
Replace the Attribute definition by:
Attribute definition: class identifier as defined in 5.5.
Page 28
5 Component class specification
Replace the last sentence of the 7 paragraph by the following text:

Classifying data element types are indicated by black dots, corresponding to the nodes of the

tree, and the branches correspond to their values, the value meanings of which are defined in

the note attribute of the class that has been defined by the classifying data element type.

Page 30
Insert the following new Subclause 5.1 and renumber the subsequent subclauses
accordingly:
---------------------- Page: 9 ----------------------
– 6 – 61360-1 Amend. 1  IEC:2003(E)
5.1 Shape of package outlines for components

The classification scheme for the shapes of package outlines is based on the following three

characteristics of the package according to the codes defined in IEC 60191-4:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.