iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 335-1:1995

(Main)

Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 1: General

Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 1: General

This part of EN 335 defines five hazard classes which represent the different service situations to which wood and wood-based products can be exposed. This part also indicates the biological agents relevant to each situation. Annex A gives information to these biological agents.

Dauerhaftigkeit von Holz und Holzprodukten - Definition der Gefährdungsklassen für einen biologischen Befall - Teil 1: Allgemeines

Dieser Teil von EN 335 legt fünf Gefährdungsklassen fest, die die verschiedenen Gebrauchsbedingungen repräsentieren, denen Holz und Holzprodukte ausgesetzt sein können. Dieser Teil gibt ferner die für jede Behandlung zutreffenden Organismen an. Anhang A enthält Informationen über diese Organismen.

Durabilité du bois et des matériaux dérivés du bois - Définitions des classes de risque d'attaque biologique - Partie 1: Généralités

La présente partie de l'EN 335 définit cinq classes de risque qui correspondent aux différentes situations en service auxquelles peuvent etre exposés le bois et les produits a base de bois. Cette partie indique également les agents biologiques correspondant a chaque situation. L'annexe A donne des informations sur les agents biologiques.

Trajnost lesa in lesnih materialov - Definicija razredov ogroženosti pred biološkim napadom - 1. del: Splošno

General Information

Status
Withdrawn
Publication Date
31-Oct-1995
Withdrawal Date
30-Nov-2006
ICS
71.100.50 - Wood-protecting chemicals
79.040 - Wood, sawlogs and sawn timber
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2006
Due Date
01-Dec-2006
Completion Date
01-Dec-2006
Directive
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
EN 335-1:1992 - Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 1: General

Relations

Replaced By
SIST EN 335-1:2006 - Durability of wood and wood- based products - Definition of use classes - Part 1: General
Effective Date
01-Dec-2006

Buy Standard

EN 335-1:1995EN 335-1:1995
PreviousNext
Standard
EN 335-1:1995
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Trajnost lesa in lesnih materialov - Definicija razredov ogroženosti pred biološkim napadom - 1. del: SplošnoDauerhaftigkeit von Holz und Holzprodukten - Definition der Gefährdungsklassen für einen biologischen Befall - Teil 1: AllgemeinesDurabilité du bois et des matériaux dérivés du bois - Définitions des classes de risque d'attaque biologique - Partie 1: GénéralitésDurability of wood and wood-based products - Def
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 351-1:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 351-1:2023

This part of EN 351 establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These shall be used as a basis for specifying preservative treatments for particular products.
This part of EN 351 provides terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
This part of EN 351 is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE   Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of EN 351 does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of EN 351 does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informatives) provides a decision process for defining preservative treatment requirements.
Annex B (informative) gives an example of the marking system.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 351-2:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood
EN 351-2:2023

This part of EN 351 gives guidance on the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on how to measure the penetration and retention of a wood preservative in the treated wood.
This part of EN 351 is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined by the use classes in EN 335.
This part of EN 351 is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of EN 351 may be applied for the subsequent examination of treated wood in service.
Annex A (informative) provide a selection of number of sampling units.
Annex B (informative) provides examples of retention measurements.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022/AC:2023(Corrigendum)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022/AC:2023

This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14734:2022(Main)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
EN 14734:2022

This document describes a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It can also be used to investigate variation between samples of the same species but of different origin.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14128:2020(Main)
Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests
EN 14128:2020

This European Standard specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test.
Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives.
This European Standard is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This European Standard is also applicable for products applied to prevent the growth of the dry rot fungus through masonry.
This European Standard is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards or as normative annexes to this European Standard.
NOTE 1   For re-testing after making variations in product formulation, guidance is given in Annex A.
NOTE 2   This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR).
This European Standard is not applicable to products used as fumigants.
This European Standard is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1.
Annex A (informative) contains a guidance on re-testing after making variations in product formulation.
Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.
Annex C (informative) contains a guidance for physical chemical properties.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16755:2017/AC:2018(Corrigendum)
Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
EN 16755:2017/AC:2018

CCMC - addition of superseding note in the European Foreword

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 15119-1:2018(Main)
Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method
CEN/TS 15119-1:2018

This Technical Specification describes a laboratory method for obtaining water samples from preservative treated wood exposed out of ground contact (wood held in the storage yard after treatment and which has been in conditions designed to simulate outdoor, out of ground contact situations), at increasing time intervals after exposure.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16755:2017(Main)
Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
EN 16755:2017

This European Standard describes the characteristics that fire-retardant treated wood products should exhibit in order that its fire-retardant properties will persist undiminished throughout the desired service life in the anticipated conditions of use.
The Standard prescribes the classification requirements for the durability of the reaction to fire performance of fire-retardant treated wood products to be used in interior and exterior end use conditions. The products shall initially meet required reaction to fire classification. For interior and exterior use, limited hygroscopicity shall be verified. In addition, products for exterior use shall meet the minimum durability of reaction to fire performance requirements specific to the end use.
The requirements are applicable to wood which has been treated during a production process with fire retardant product applied either by a penetration process or by a superficial process, such as with a film forming or intumescent fire retardant coating. The fire-retardant treated products may be coated with an ordinary paint.
Mechanical properties and biological durability of fire-retardant treated wood products are not covered by this European Standard.
Paints, coatings and varnishes intended to improve the reaction to fire performance of a construction product when incorporated in situ in the construction works, are covered by ETAG 028 [19].
This Standard may be used as a basis for an approval system.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 335:2013(Main)
Durability of wood and wood- based products - Use classes: definitions, application to solid wood and wood based panels
EN 335:2013

This European Standard is applicable to solid wood and wood-based products. This European Standard defines five use classes that represent different service situations to which wood and wood-based products can be exposed. This standard also indicates the biological agents relevant to each situation. A use class is not a performance class and does not give guidance for how long wood and wood-based product will last in service.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12490:2010(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood
EN 12490:2010

This European Standard specifies the reference methods for determining the penetration and retention of creosote in timber freshly treated with creosote, principally in order to ascertain whether the treated timber conforms to specifications written in terms of EN 351-1. It also provides guidance on the acquisition of test samples and their handling between sampling and analysis. NOTE In the day-to-day practice at the plant, other methods (e.g. weighing the charge before and after treatment) can be used for determining the retention, provided that a significant relationship can be established with this method.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day