Source for standards, engineering specifications, manuals and technical publications

This document defines the general considerations applicable to any type of remote monitoring and control system (RMCS) used in irrigation. The document also includes some specific clauses on RMCS that fully or partially incorporate controllers developed for irrigation. These controllers are specific hardware developments designed for specific irrigation monitoring and/or control requirements. An indication is given at the beginning of each section that clearly defines when it is specifically intended for controllers developed for irrigation.

This document specifies the cloud computing reference architecture (CCRA).

The EN 50483 series applies to overhead line fittings for tensioning, supporting and connecting aerial bundled cables (ABC) of rated voltage U0/U (Um): 0,6/1 (1,2) kV.
This document defines the environmental tests in particular the climatic and corrosion ageing tests. The objective of these tests is to predict the behaviour of ABC accessories when subjected to sun radiation, to weather conditions (humidity, spraying water, heat, cold) and pollution. EN 50483-1, EN 50483-2, EN 50483-3 and EN 50483-4 specify which type tests included in this part of the standard are needed.

This document applies to personal dosemeters with the following characteristics:
a)   They are worn on the trunk, close to the eye, or on the extremities.
b)   They measure the personal dose equivalents Hp(10), Hp(3), and Hp(0,07), from external X and gamma, neutron (not for Hp(3)), and beta radiations, and may measure the respective personal dose equivalent rates for the same radiations (for alarming purposes).
c)   They have a digital indication. This indication may or may not be attached.
d)   They have alarm functions for the personal dose equivalents or personal dose equivalent rates except for hybrid dosemeters. For hybrid dosemeters an alarm function for the personal dose equivalents shall be implemented in the associated readout system.

Applies to electric storage heaters intended to heat the room in which they are located. It defines the main performance characteristics and describes methods for measuring these characteristics. It does not apply to heating appliances incorporated in the building structure, to central heating systems or to floor heating appliances.

Building on the consolidated definitions of NbS, this document establishes a terminology to support the development of an agreed vocabulary, forming the basis of the standardisation process.

This document gives guidance on the procedure for the bioaccumulation of substances liable to cause atmospheric pollution. This is done by using the grass species Lolium multiflorum ssp. italicum designated hereafter as Italian rye-grass. It is an active biomonitoring approach insofar as the plants used are first cultivated in set conditions before being exposed at the monitoring locations in the field. The plants then record any pollution events that occur while they are being exposed, allowing such events to be accurately dated.
The document specifies a method for identification and localization of one or more single pollution sources and the tracking of their "plume" on a local or regional scale. The method described also offers a tool to monitor sites in the long term by the repeated application of a clearly defined procedure and to describe the local or regional air pollution situation.
The method described in this document is applicable to solid and gaseous substances deposited on plants, where they can accumulate on their surface or in their tissues. These substances include sulphur, chloride, fluoride and especially metals as well as low volatile organic and halo-organic compounds such as polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB), polybrominated diphenyl ethers (PBDE), polychlorinated dibenzo dioxins (PCDD) and polychlorinated dibenzo furans (PCDF). It is as well possible to verify pesticides which are used in plant protection products. The range of potential substances can be expanded according to the task at hand and the capabilities of conducting trace analyses and assessment.
The method described in this document allows spatial and temporal comparisons and allows for screening, thus providing a first indication of risk. The results of grass culture studies can suggest risks to biota (e.g. via the food chain) which require further investigation.
The method described in this document does not replace physico-chemical methods of direct measurement or modelling of air pollutants and cannot be replaced by them for its part; it complements them by indicating biological effects.
Potential areas of deployment are:
-   permit procedures related to air pollution legislation;
-   preservation of evidence related to the code for protection from pollution;
-   monitoring of emission sources and performance control;
-   assessment of local-scale emission transport;
-   evidence of causation, e.g. related to environmental liability;
-   air quality maintenance plans/strategies;
-   long-term monitoring of ecological effects of atmospheric depositions;
-   detection and assessment of local, regional, and countrywide effects of atmospheric depositions;
-   assessment of risks for humans and/or animals via the food chain.
This document is of interest to those involved in environmental monitoring.

This document specifies requirements for the contents of a technical file to demonstrate the fulfilment of regulatory requirements for an endosseous dental implant that can include:
implant body;
implant abutment;
abutment screw;
implant connecting part;
implant connecting part screw;
prosthetic screw;
implant cover screw;
transmucosal healing component.
This document also specifies requirements for intended use and performance, design attributes, components, biocompatibility, manufacturing, packaging, sterilization, shelf life, marking, labelling and information supplied by the manufacturer.
This document does not apply to the following devices:
dental implants incorporating animal or human components or bioactive characteristics;
custom-made devices that have no pre-fabricated connection;
implantable materials for bone filling and augmentation in oral and maxillofacial surgery;
membrane materials for guided tissue regeneration in oral and maxillofacial surgery;
specific instruments indicated to be used as part of a dental implant system.
NOTE 1        ISO 22794 specifies the necessary content of technical files for implantable materials for bone filling and augmentation in oral and maxillofacial surgery. ISO 22803 specifies the necessary content of technical files for membrane materials for guided tissue regeneration in oral and maxillofacial surgery. These materials require a separate technical file.
NOTE 2        ISO 13504 gives the general requirements for specific instruments indicated to be used as part of a dental implant system. These instruments require a separate technical file.
NOTE 3        Custom-made devices are defined in IMDRF/PMD WG/N49 [5].

This part of IEC 62676 specifies the functions, performance, interfaces, environmental adaptability, test methods, performance evaluation and grading rules of real-time intelligent video analysis in surveillance systems.
This document applies to live and forensic, real-time intelligent video analysis devices and systems in video surveillance.
The document is centred on testing performance and grading device functionality which enables:
• Core capability: Classification of objects, detection of specific "object activity", such as "stopping", "starting", "direction of movement", etc.
Examples are listed in Annex A.
• Complex capability: Detection of "scenarios" which are based on combinations of object activity, such as "loitering", "perimeter intrusion detection", "person down", "tailgating", "intrusion", "abandoned object detection", explosion, fire, flood, potential terrorist attack using a vehicle, owner of an abandoned bag, etc.
Examples of current scenarios are listed and described in Annex B.
• Degree of difficulty: The application of real operating environments to test the performance under known or required operating stress levels, examples of operating stress levels that are sterile or non-sterile, indoor or outdoor, target obscuration levels, extreme weather conditions, vibrating mechanical rugged environments causing image shake resulting in degradation of image quality requirement, see Table 1 and Annex C.
The purpose of this document is to provide end users, at different levels of the service process, from users and installers, integrators and maintenance companies, to certification providers, with methods to measure the performance of video analysis systems that must also comply with other parts of the standard.

This document specifies requirements for the optical and geometrical properties of semi-finished blanks.

This document gives guidelines for establishing severity assessment criteria for anomalies identified by airborne (AB) and structure-borne (SB) ultrasound, specifies methods and requirements for carrying out ultrasonic inspection, testing, measurement and monitoring of machines, including safety recommendations and sources of error, and provides information relative to data interpretation, assessment criteria and reporting.

This document defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory gravimetric separation efficiency and system pressure tests in both open and closed crankcase ventilation systems. This document has a limitation of 0 % to 99 % for aerosol gravimetric efficiency. NOTE Gravimetric efficiencies > 99 % can be difficult to measure due to long test durations and absolute filter weight measurements. Filter life is not evaluated in this document. This test method only applies to devices that have a defined tubular inlet, outlet and drain that can be connected to the test equipment. For devices that lack such connections, for example, one that is built into a valve cover, see Annex A.

IEC 63522-41:2026 provides guidelines for the insulation coordination of electromechanical elementary, solid state, time, forcibility guided and reed relays as well reed contacts and hybrid switching solutions. This document can also be used for similar devices when specified in a detail specification.

This document specifies requirements for implantation test methods for preclinical assessment of the local effects after implantation of medical devices or materials intended for use in medical devices. This document is applicable to the evaluation of local tissue responses from medical devices that are intended to be used where skin or mucosal tissue is breached, when required. This document is applicable to medical device or materials that require implantation evaluation and can be solid or non-solid (such as porous materials, liquids, gels, pastes, powders, and particulates), absorbable, degradable, non- absorbable, or can be tissue-engineered medical products (TEMPs). These implantation tests are not intended to evaluate or determine the performance of the test sample in terms of mechanical loading or functional performance. This document also does not provide guidance on methods and study design to satisfy requirements for systemic toxicity, carcinogenicity, teratogenicity or mutagenicity. However, the study designs can be modified to also assess other biological effects.

This document specifies requirements and guidelines for: the design parameters to be provided to the heating, ventilation and air conditioning (HVAC) unit manufacturer by the rolling stock manufacturer (“Customer”) and the railway operator, the test and inspection items, requirements and methods used by the HVAC unit manufacturer to verify that the HVAC unit conforms with the design parameters. This document is applicable to HVAC units for the passenger area and driver’s cabs in urban (metro, tramway), suburban, regional and main line vehicles.

This document specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. This document helps an organization to achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. The intended outcomes of an environmental management system include: enhancing environmental performance; meeting compliance obligations; achieving environmental objectives. This document is applicable to any organization, regardless of size, type or nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. This document does not state specific environmental performance criteria. This document can be used in whole or in part to systematically improve environmental management. Claims of conformity to this document, however, are not acceptable unless all its requirements are incorporated into an organization’s environmental management system and fulfilled without exclusion.