77.150 - Products of non-ferrous metals
ICS 77.150 Details
Products of non-ferrous metals
NE-Metallprodukte
Produits en metaux non ferreux
Izdelki iz neželeznih kovin
General Information
Frequently Asked Questions
ICS 77.150 is a classification code in the International Classification for Standards (ICS) system. It covers "Products of non-ferrous metals". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 3373 standards classified under ICS 77.150 (Products of non-ferrous metals). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 77.150 - Products of non-ferrous metals
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.
- Standard52 pagesEnglish languagee-Library read for1 day
This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.
- Standard52 pagesEnglish languagee-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
This document specifies the material requirements and testing procedures applicable to wrought and cast aluminium and aluminium alloys intended for use in the production of pressure equipment.
This document covers:
- the products forms, grades and tempers of wrought and cast aluminium and aluminium alloys which are used for such applications together with data for wrought and cast alloys over their permissible working temperature ranges;
- the technical conditions for inspection and delivery, mechanical property limits and tolerances on form and dimensions by reference to the appropriate European standards for the relevant wrought and cast aluminium and aluminium alloys;
- additional requirements which are specific to pressure equipment applications.
It applies to hot-rolled plate, cold-rolled sheet/strip/circles, extruded or extruded and cold drawn rod/bar, tube, extruded open/hollow profiles, forgings and castings. Considering this, this document is intended to be used in conjunction with the EN 573 series, EN 485 series, EN 941, EN 754 series, EN 755 series, EN 586 series and EN 1706. The materials and application ranges covered by this document are those given in Annex A, Table A.1 for wrought alloys and Table A.2 for castings.
The objective of this document is to only cover the materials used for components of pressure equipment. Fabrication or fabrication methods for pressure equipment are excluded from this document.
- Standard64 pagesEnglish languagee-Library read for1 day
This document specifies the material requirements and testing procedures applicable to wrought and cast aluminium and aluminium alloys intended for use in the production of pressure equipment.
This document covers:
- the products forms, grades and tempers of wrought and cast aluminium and aluminium alloys which are used for such applications together with data for wrought and cast alloys over their permissible working temperature ranges;
- the technical conditions for inspection and delivery, mechanical property limits and tolerances on form and dimensions by reference to the appropriate European standards for the relevant wrought and cast aluminium and aluminium alloys;
- additional requirements which are specific to pressure equipment applications.
It applies to hot-rolled plate, cold-rolled sheet/strip/circles, extruded or extruded and cold drawn rod/bar, tube, extruded open/hollow profiles, forgings and castings. Considering this, this document is intended to be used in conjunction with the EN 573 series, EN 485 series, EN 941, EN 754 series, EN 755 series, EN 586 series and EN 1706. The materials and application ranges covered by this document are those given in Annex A, Table A.1 for wrought alloys and Table A.2 for castings.
The objective of this document is to only cover the materials used for components of pressure equipment. Fabrication or fabrication methods for pressure equipment are excluded from this document.
- Standard64 pagesEnglish languagee-Library read for1 day
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.
- Standard75 pagesEnglish languagee-Library read for1 day
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.
- Standard75 pagesEnglish languagee-Library read for1 day
This document specifies the tolerances on form and dimensions of the following: — wrought aluminium and aluminium alloy extruded round tubes, having diameters from 13 mm up to 450 mm. — wrought aluminium and aluminium alloy extruded square, rectangular and hexagonal tubes, having circumscribing circle up to 350 mm in diameter. This document is applicable to extruded round, square, rectangular and hexagonal tubes. Four-digit numerical designations are in line with the Registration of International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys (known as "Teal sheets").[1]
- Standard17 pagesEnglish languagesale 15% off
- Amendment7 pagesEnglish languagee-Library read for1 day
This document specifies product characteristics, assessment methods, compliance criteria of test results and a designation system for push-fit fittings for the purpose of joining tubes of copper, plated copper, multilayer pipes and plastics pipes. The fitting ends have a nominal diameter from 6 mm to 63 mm. The fittings are designed for a service lifetime up to fifty years.
This document is applicable to push-fit fittings for joining one or more of the following tubes or pipes:
- copper tubes according to EN 1057.
- plastics and multilayer pipes.
The fittings are used up to the operating temperatures and corresponding maximum operating pressures as indicated in Annex A.
This document applies to copper alloy fittings. A non-exhaustive list of these copper alloys is given in CEN/TS 13388.
Adaptor fittings can combine push-fit ends with fitting ends defined in the other parts of EN 1254.
Push-fit fittings for metallic tubes can also have flanged end connections according to EN 1092 3.
Push-fit fittings can also have a plated or other decorative surface coating.
Fittings can be produced by machining, metal forming, casting, or fabrication.
Products covered by this document are intended to be used in liquid applications:
- hot, cold or combined hot and cold water, including systems according to the EN 806 series;
- closed heating systems according to EN 12828;
- cooling systems;
- drainage systems;
- fire protection systems including sprinkler systems according to EN 12845.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies product characteristics, assessment methods, compliance criteria of test results and a designation system for fittings with compression ends for use with plastics and multilayer pipes which are defined in the applicable pipe standard. For the purposes of joining plastics pipes, the fitting ends have a nominal diameter from 6 mm to 160 mm. The fittings are designed for a service lifetime up to fifty years.
The compression fittings are used up to the operating temperatures and corresponding maximum operating pressures as indicated in Annex A.
This document applies to copper alloy fittings. A non-exhaustive list of these copper alloys is given in CEN/TS 13388.
Adaptor fittings for use with plastics and multilayer pipes may combine compression ends with fitting ends defined in the other parts of EN 1254.
Compression fittings for use with plastics and multilayer pipes may also have flanged end connections according to EN 1092-3.
Compression fittings for use with plastics and multilayer pipes may also have a plated or other decorative surface coating.
Fittings can be produced by machining, metal forming, casting, or fabrication.
Products covered by this document are intended to be used in:
a) liquid applications:
- hot, cold or combined hot and cold water, including systems according to EN 806;
- closed heating systems according to EN 12828;
- cooling systems;
- drainage systems;
- fire protection systems including sprinkler systems according to EN 12845.
b) gas applications (not valid for multilayer pipes):
- natural gas and liquefied petroleum gas systems with a maximum operating pressure less than or equal to 5 bar according to EN 1775;
- compressed air systems.
- Standard36 pagesEnglish languagee-Library read for1 day
This document specifies product characteristics, assessment methods, compliance criteria of test results and a designation system for fittings with radial and axial press ends for use with plastics and multilayer pipes. The fitting ends have a nominal diameter from 10 mm to 160 mm. The fittings are designed for a service lifetime up to fifty years.
This document applies to copper alloy fittings. A non-exhaustive list of these copper alloys is given in CEN/TS 13388.
Adaptor fittings for use with plastics and multilayer pipes may combine press ends with fitting ends defined in the other parts of EN 1254.
Press fittings for use with plastics and multilayer pipes may also have flanged end connections according to EN 1092-3.
Press fittings for use with plastics and multilayer pipes may also have a plated or other decorative surface coating.
Fittings can be produced by machining, metal forming, casting, or fabrication.
Products covered by this document are intended to be used in:
a) liquid applications:
- hot, cold or combined hot and cold water, including systems according to EN 806;
- closed heating systems according to EN 12828;
- cooling systems;
- drainage systems;
- fire protection systems including sprinkler systems according to EN 12845;
- supply systems for points of consumption with liquid fuels according to EN 12514.
b) gas applications:
- natural gas and liquefied petroleum gas systems with a maximum operating pressure less than or equal to 5 bar according to EN 1775;
- compressed air systems.
- Standard34 pagesEnglish languagee-Library read for1 day
This document contains definitions, thread dimension, reference data (minimum bore and wall thickness), supporting information (assembling instructions) and describes the test methods referenced by other parts of the EN 1254 series.
Thread dimensions comprise: wall thickness at threaded portions of fittings, dimensions of tail pipe ends for swivel fittings, dimensions of gas union connectors, thread dimensions and thread profile.
Test methods comprise: leak tightness under internal hydrostatic pressure, leak tightness under internal pneumatic pressure, integrity of fabricated fitting bodies or having an 'as cast' microstructure, resistance to pull out of joints to metallic tubes, resistance of joints with metallic tube to vibration, resistance of joints to static flexural force, leak tightness of joints under vacuum, the resistance of joints to temperature cycling, detecting non-pressed fitting ends, resistance to stress corrosion, detection of a carbon film on the surface of copper fittings, determination of mean depth of dezincification, resistance of joints to pressure cycling, disconnection and re-use, determining if the diameter and/or the length of engagement of a capillary end is/are within the specified tolerance, determining the minimum length of engagement of an integral solder or brazing ring socket having a formed groove.
- Standard64 pagesEnglish languagee-Library read for1 day
This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.
- Corrigendum2 pagesEnglish languagee-Library read for1 day
This document specifies the chemical composition limits of wrought products and ingots intended to be wrought in aluminium and aluminium alloys.
- Standard20 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy cold drawn rod/bar and tube.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.
- Standard44 pagesEnglish languagee-Library read for1 day
- Amendment5 pagesEnglish languagee-Library read for1 day
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy cold drawn rod/bar and tube.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.
- Standard44 pagesEnglish languagee-Library read for1 day
This document specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes, smooth or inner finned, used for heat exchangers and their internal connecting pipes in the manufacturing of refrigeration and air conditioning equipment.
It is applicable to tubes with an outside diameter from 3,97 mm up to and including 219 mm.
NOTE The tubes are supplied in straight length or as coils.
- Standard28 pagesEnglish languagee-Library read for1 day
This Part 11 of this European Standard specifies requirements for unfired pressure vessels and their parts made of titanium and titanium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2014 Parts 1 to 5.
NOTE 1 Cast materials, HIP and additive manufacturing are not included in this version. Details regarding such materials will be subject to an amendment to or a revision of this European Standard.
NOTE 2 Materials in Groups 51.4 and 54 are not included in this version.
- Standard34 pagesEnglish languagee-Library read for1 day
This document specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480:2024 and CEN/TR 13480-7:2017. It specifies requirements for wrought products only.
NOTE Castings is not covered in this document.
- Standard44 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
This European Standard applies to profiles with L-, T- and U-shaped cross-sections which would fit within a circumscribing circle of a maximum 180 mm diameter and to bars with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
- Standard53 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, the property requirements and tolerances on dimensions and form for copper and copper alloy die and hand forgings.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
- Standard61 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod, finally produced by drawing or extruding, specifically intended for free machining purposes.
NOTE Hollow products having an outside diameter greater than 80 mm and/or a wall thickness less than 2 mm are most frequently specified in EN 12449.
The sampling procedures, the methods of test for verification of conformity to the requirements of this document, are also specified.
- Standard40 pagesEnglish languagee-Library read for1 day
This document specifies the composition, mechanical properties and other relevant characteristics of copper and copper alloys. The sampling procedures and test methods for the verification of conformity to the requirements of this document are also specified.
This document is applicable to:
a) copper alloy ingots intended to be remelted for later processing (e.g. castings); and
b) copper and copper alloy castings which are intended for use without subsequent working other than machining.
Recommended practice for the ordering and supply of castings is included in Annex A. Optional supplementary inspection procedures for ingots and castings are included in Annex B.
NOTE Ingots are not suitable for pressure equipment applications.
- Standard66 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for forging stock of copper and copper alloys.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
- Standard27 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding intended for general purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
- Standard44 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy wire, finally produced by drawing, rolling or extruding, intended for general purposes, spring and fastener manufacturing applications.
The sampling procedures and the methods of test for verification of conformity to the requirements of this document are also specified.
- Standard48 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this document are also specified.
- Standard44 pagesEnglish languagee-Library read for1 day
IEC 60317-0-3:2024 is available as IEC 60317-0-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60317-0-3:2024 specifies the general requirements of enamelled round aluminium winding wires with or without a bonding layer. The range of nominal conductor diameters is given in the relevant specification sheet.
This edition includes the following significant technical changes with respect to the previous edition:
a) Revision to Clause 7, designating the test as inappropriate;
b) Revision to Clause 10, designating the test as inappropriate.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod, finally produced by drawing or extruding, specifically intended for free machining purposes.
NOTE Hollow products having an outside diameter greater than 80 mm and/or a wall thickness less than 2 mm are most frequently specified in EN 12449.
The sampling procedures, the methods of test for verification of conformity to the requirements of this document, are also specified.
- Standard40 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding intended for general purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
- Standard44 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for forging stock of copper and copper alloys.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
- Standard27 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy profiles including L-, T-, U-shaped cross-sections, and bars, finally produced by drawing or extruding.
This European Standard applies to profiles with L-, T- and U-shaped cross-sections which would fit within a circumscribing circle of a maximum 180 mm diameter and to bars with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
- Standard53 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this document are also specified.
- Standard44 pagesEnglish languagee-Library read for1 day
This European Standard specifies the composition, the property requirements and tolerances on dimensions and form for copper and copper alloy die and hand forgings.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
- Standard61 pagesEnglish languagee-Library read for1 day
This document specifies the composition, mechanical properties and other relevant characteristics of copper and copper alloys. The sampling procedures and test methods for the verification of conformity to the requirements of this document are also specified.
This document is applicable to:
a) copper alloy ingots intended to be remelted for later processing (e.g. castings); and
b) copper and copper alloy castings which are intended for use without subsequent working other than machining.
Recommended practice for the ordering and supply of castings is included in Annex A. Optional supplementary inspection procedures for ingots and castings are included in Annex B.
NOTE Ingots are not suitable for pressure equipment applications.
- Standard66 pagesEnglish languagee-Library read for1 day
This document specifies the composition, property requirements and dimensional tolerances for copper alloy wire, finally produced by drawing, rolling or extruding, intended for general purposes, spring and fastener manufacturing applications.
The sampling procedures and the methods of test for verification of conformity to the requirements of this document are also specified.
- Standard48 pagesEnglish languagee-Library read for1 day
This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging stock in aluminium and aluminium alloys for general engineering applications.
The chemical composition and temper designations for these alloys are specified in EN 573 3 and EN 515 respectively.
- Standard9 pagesEnglish languagee-Library read for1 day
This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging stock in aluminium and aluminium alloys for general engineering applications.
The chemical composition and temper designations for these alloys are specified in EN 573 3 and EN 515 respectively.
- Standard9 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day
- Amendment7 pagesEnglish languagee-Library read for1 day