EN ISO 5470-1:1999

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999)

This standard specifies a method for determination of the abrasion resistance of rubber or plastics coated fabrics using the taker abruder.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung des Abriebwiderstandes - Teil 1: Taber-Abriebprüfgerät (ISO 5470-1:1999)

Der vorliegende Teil von ISO 5470 beschreibt ein Verfahren zur Beurteilung des Abriebwiderstandes mit Hilfe des Taber-Abriebprüfgerätes von beschichteten Textilien.

Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance à l'usure - Partie 1: Appareil d'essai d'abrasion Taber (ISO 5470-1:1999)

La présente partie de l'ISO 5470 spécifie une méthode pour l'évaluation de la résistance à l'usure des textiles revêtus de caoutchouc ou de plastique à l'aide d'un appareil d'abrasion.

Gumirane ali plastificirane tekstilije - Ugotavljanje odpornosti proti drgnenju - 1.del: taberjev drgalnik (ISO 5470-1:1999)

General Information

• Status: Withdrawn
• Publication Date: 31-May-1999
• Withdrawal Date: 06-Dec-2016
• ICS: 59.080 - Products of the textile industry
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248/WG 4 - Coated fabrics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Dec-2016
• Ref Project: SIST EN ISO 5470-1:1999 - Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999)

Relations

• Replaced By: EN ISO 5470-1:2016 - Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
• Effective Date: 14-Dec-2016
• Child: EN ISO 5470-2:2003 - Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gumirane ali plastificirane tekstilije - Ugotavljanje odpornosti proti drgnenju - 1.del: taberjev drgalnik (ISO 5470-1:1999)Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung des Abriebwiderstandes - Teil 1: Taber-Abriebprüfgerät (ISO 5470-1:1999)Supports textiles revetus de caoutchouc ou de plastique - Détermination de la résistance a l'usure - Partie 1: Appareil d'essai d'abrasion Taber (ISO 5470-1:1999)Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999)59.080.40WHNVWLOLMHCoated fabricsICS:Ta slovenski standard je istoveten z:EN ISO 5470-1:1999SIST EN ISO 5470-1:1999en01-november-1999SIST EN ISO 5470-1:1999SLOVENSKI
STANDARD



SIST EN ISO 5470-1:1999



SIST EN ISO 5470-1:1999



SIST EN ISO 5470-1:1999



SIST EN ISO 5470-1:1999



SIST EN ISO 5470-1:1999



AReference numberISO 5470-1:1999(E)INTERNATIONALSTANDARDISO5470-1First edition1999-06-01Rubber- or plastics-coated fabrics —Determination of abrasion resistance —Part 1:Taber abraderSupports textiles revêtus de caoutchouc ou de plastique — Déterminationde la résistance à l'usure —Partie 1: Appareil d'essai d'abrasion TaberSIST EN ISO 5470-1:1999



ISO 5470-1:1999(E)©
ISO 1999All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · [e-mail] in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.International Standard ISO 5470-1 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products.It cancels and replaces ISO 5470:1980, which has been technically revised.ISO 5470 consists of the following parts, under the general title Rubber- or plastics-coated fabrics — Determinationof abrasion resistance:¾ Part 1: Taber abrader¾ Part 2: Martindale abraderAnnex A forms an integral part of this part of ISO 5470.SIST EN ISO 5470-1:1999



© ISOISO 5470-1:1999(E)iiiIntroductionIt has long been accepted that some of the parameters associated with the Taber test as given in ISO 5470:1980needed to be more closely specified if reasonable reproducibility (R) was to be obtained. Much of the work is nowcompleted and has been acknowledged by ISO/TC 61 in publishing ISO 9352, which employs a zinc plate as ameans of calibrating the initial abrasive power of the wheels. This does not, however, entirely overcome the problemof clogging or maintaining abrasion properties between and during tests. It may also be regarded as expensive andtime-consuming.This part of ISO 5470 permits the approach in ISO 9352 to be adopted if so desired. However, the majordisadvantages of the Taber abrader are that:a) end points can be somewhat subjective unless a gravimetric technique is employed;b) only a small strip of material is abraded;c) because of the velocity of interfacial friction, localized heating of the coating polymer can cause softening andthus be less representative of abrasive wear in service;d) the 6 mm diameter hole in the centre of the test piece does not permit post-abrasion assessments of propertiessuch as hydrostatic heat resistance or resistance to chemical reagents.SIST EN ISO 5470-1:1999



SIST EN ISO 5470-1:1999



INTERNATIONAL STANDARD
© ISOISO 5470-1:1999(E)1Rubber- or plastics-coated fabrics — Determination of abrasionresistancePart 1:Taber abraderWARNING — Persons using this part of ISO 5470 should be familiar with normal laboratory practice. Thispart of ISO 5470 does not purport to address all of the safety problems, if any, associated with its use. It isthe responsibility of the user to establish appropriate safety and health practices and to ensure compliancewith any national regulatory conditions.1 ScopeThis part of ISO 5470 describes a method of assessing the ab
...