EN ISO 9606-1:2013

Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012)

ISO 9606-1:2012 specifies the requirements for qualification testing of welders for fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
When qualifying welders, the emphasis is placed on the welder's ability manually to manipulate the electrode, welding torch or welding blowpipe, thereby producing a weld of acceptable quality.
The welding processes referred to in ISO 9606-1:2012 include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes.

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012 + Cor 1:2012)

Der vorliegende Teil der ISO 9606 legt die Anforderungen an die Schweißerprüfung für das Schmelz-schweißen von Stählen fest.
Er stellt eine Reihe technischer Regeln für eine systematische Prüfung von Schweißern auf und ermöglicht so, dass solche Qualifikationen unabhängig von der Art des Erzeugnisses, des Ortes und des Prüfers/der Prüfstelle einheitlich akzeptiert werden.
Wenn Schweißer qualifiziert werden, liegt der Schwerpunkt auf der Fähigkeit des Schweißers, den Elektrodenhalter/die Schweißpistole/den Schweißbrenner so zu handhaben, dass damit eine Schweißung von zulässiger Qualität erzeugt wird.
Die Schweißprozesse nach diesem Teil der ISO 9606 schließen nur solche Schmelzschweißprozesse ein, die als Handschweißen oder teilmechanisches Schweißen bezeichnet werden. Sie schließen keine voll-mechanischen und automatischen Schweißprozesse ein.
ANMERKUNG   Für derartige Verfahren siehe ISO 14732 [10].

Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1: Aciers (ISO 9606-1:2012, Cor 1:2012 et Cor 2:2013 inclus)

L'ISO 9606-1:2012 définit les exigences relatives à l'épreuve de qualification des soudeurs pour le soudage par fusion des aciers.
Elle fournit un ensemble de règles techniques pour l'épreuve de qualification systématique des soudeurs et permet à de telles qualifications d'être acceptées uniformément, indépendamment du type de produit, du lieu et de l'examinateur ou de l'organisme d'examen.
Lors de la qualification des soudeurs, l'accent est porté sur l'aptitude du soudeur à guider manuellement l'électrode, la torche ou le chalumeau de soudage afin de produire une soudure de qualité acceptable.
Les procédés de soudage concernés par l'ISO 9606-1:2012 sont les procédés de soudage par fusion désignés comme manuels ou semi-automatiques. L'ISO 9606-1:2012 n'est pas applicable aux procédés de soudage totalement mécanisés et automatisés.

Preskušanje usposobljenosti varilcev - Talilno varjenje - 1. del: Jekla (ISO 9606-1:2012, vključuje tudi Cor 1:2012)

Ta del standarda ISO 9606 določa zahteve za preskušanje usposobljenosti varilcev pri talilnem varjenju jekel. Podaja niz tehničnih pravil za sistematično preskušanje usposobljenosti varilcev in omogoča, da so taka usposabljanja povsod priznana, ne glede na vrsto izdelka, lokacijo in preizkuševalca oz. komisijo. Pri usposabljanju varilcev je največ poudarka na sposobnosti varilca, da ročno upravlja elektrode, plamena ali gorilnike za varjenje, da proizvede zvar sprejemljive kakovosti. Postopki varjenja, ki so navedeni v tem delu standarda ISO 9606, vključujejo tiste postopke talilnega varjenja, ki so zasnovani za ročno ali delno mehanizirano varjenje. Popolnoma mehaniziranih in avtomatiziranih postopkov varjenja ne obravnava v celoti.

General Information

• Status: Withdrawn
• Publication Date: 15-Oct-2013
• Withdrawal Date: 22-Aug-2017
• ICS: 03.100.30 - Management of human resources
• ICS: 25.160.01 - Welding, brazing and soldering in general
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Aug-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 9606-1:2013 - Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012)

Relations

• Replaces: EN 287-1:2011 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 17-Oct-2012
• Replaced By: EN ISO 9606-1:2017 - Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
• Effective Date: 30-Aug-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2013
1DGRPHãþD
SIST EN 287-1:2011
3UHVNXãDQMHXVSRVREOMHQRVWLYDULOFHY7DOLOQRYDUMHQMHGHO-HNOD,62
YNOMXþXMHWXGL&RU
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012
including Cor 1:2012)
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012 + Cor
1:2012)
Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1: Aciers (ISO 9606-
1:2012, Cor 1:2012 et Cor 2:2013 inclus)
Ta slovenski standard je istoveten z: EN ISO 9606-1:2013
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9606-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2013
ICS 03.100.30; 25.160.10 Supersedes EN 287-1:2011
English Version
Qualification testing of welders - Fusion welding - Part 1: Steels
(ISO 9606-1:2012 including Cor 1:2012)
Épreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 1:
fusion - Partie 1: Aciers (ISO 9606-1:2012, Cor 1:2012 et Stähle (ISO 9606-1:2012 + Cor 1:2012)
Cor 2:2013 inclus)
This European Standard was approved by CEN on 8 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9606-1:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC .4

Foreword
The text of ISO 9606-1:2012 including Cor 1:2012 has been prepared by Technical Committee ISO/TC 44
“Welding and allied processes” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 9606-1:2013 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the
latest by October 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 287-1:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9606-1:2012 including Cor 1:2012 has been approved by CEN as EN ISO 9606-1:2013
without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 97/23/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 97/23/EC

Clause(s)/sub-clause(s) of this Essential Requirements (ERs) Qualifying remarks/Notes
EN of Directive 97/23/EC
Clauses 5, 6, 7, 8, 9, 10, 11 Annex I, 3.1.2 Permanant joining

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 9606-1
Second edition
2012-07-15
Qualification testing of welders — Fusion
welding —
Part 1:
Steels
Épreuve de qualification des soudeurs — Soudage par fusion
Partie 1: Aciers
Reference number
ISO 9606-1:2012(E)
©
ISO 2012
ISO 9606-1:2012(E)
©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 9606-1:2012(E)
Contents Page
Foreword . iv
Introduction . v
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 2
4  Reference numbers, symbols and abbreviated terms . 4
4.1  General . 4
4.2  Reference numbers of welding processes . 4
4.3  Symbols and abbreviated terms . 4
5  Essential variables and range of qualification . 6
5.1  General . 6
5.2  Welding processes . 7
5.3  Product type . 8
5.4  Type of weld . 9
5.5  Filler material grouping . 9
5.6  Filler material type . 10
5.7  Dimensions . 11
5.8  Welding positions . 13
5.9  Weld details . 15
6  Examination and testing . 15
6.1  Examination . 15
6.2  Test pieces . 16
6.3  Welding conditions . 18
6.4  Test methods . 18
6.5  Test piece and test specimen . 19
6.6  Test report . 23
7  Acceptance requirements for test pieces . 23
8  Re-tests. 24
9  Period of validity . 24
9.1  Initial qualification . 24
9.2  Confirmation of the validity . 24
9.3  Revalidation of welder qualification . 24
9.4  Revocation of qualification . 24
10  Welder's qualification test certificate . 25
11  Designation . 25
Annex A (informative) Welder's qualification test certificate . 27
Annex B (informative) Job knowledge . 28
Annex C (informative) FW/BW test assembly option . 31
Bibliography . 32

ISO 9606-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bo
...