Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires

This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromaticity coordinates, correlated color temperature (CCT), Color Rendering Index (CRI), and spatial uniformity of chromaticity.
This standard does not cover LED packages and products based on OLEDs (organic LEDs).
NOTE   Where the term "LED product, LED device or DUT (device under test)" is used, the term covers LED lamps, modules, light engines or luminaires.

Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 4: LED-Lampen, -Module und -Leuchten

Diese Europäische Norm legt die Anforderungen an die Messung der elektrischen, photometrischen und farbmetrischen Größen von LED Lampen, LED Modulen und LED Leuchten beim Betrieb mit Wechsel  oder Gleichspannung, möglicherweise mit dazugehörigem LED Betriebsgerät, fest. LED Light Engines werden mit LED Modulen gleichgesetzt und entsprechend behandelt. Die photometrischen und farbmetrischen Größen, die von dieser Norm abgedeckt werden, beinhalten den Gesamtlichtstrom, Lichtausbeute, Teillichtstrom, Lichtstärke¬verteilung, Lichtstärke in Hauptausstrahlrichtung, Leuchtdichte und Leuchtdichteverteilung, Normfarbwertanteile, ähnlichste Farb-temperatur (en: correlated colour temperature, CCT), Farbwiedergabe Index (en: colour rendering index, CRI) und Gleichförmigkeit der Farbe bezüglich des Winkels.
!Dieses Dokument behandelt keine LED Packages. Die beschriebenen Messmethoden für LED Lampen oder  Leuchten können als Messmethoden für OLED Produkte angewandt werden."

Lumière et éclairage - Mesure et présentation des données photométriques des lampes et des luminaires - Partie 4 : Lampes, modules et luminaires LED

La présente norme spécifie les exigences relatives à la mesure des grandeurs électriques, photométriques et colorimétriques des lampes, modules, moteurs lumière et luminaires à LED, destinés à fonctionner avec des tensions d'alimentation alternatives ou continue, éventuellement avec un appareillage associé. Les grandeurs photométriques et colorimétriques couvertes par la présente norme comprennent le flux lumineux total, l'efficacité lumineuse, la répartition de l'intensité lumineuse, l'intensité dans l'axe du faisceau, la luminance et la répartition de la luminance, les coordonnées trichromatiques, la température de couleur proximale (CCT), l'indice de rendu des couleurs (IRC) et l'uniformité spatiale de la chromaticité.
La présente norme ne traite pas des boîtiers de LED et des produits basés sur les OLED (LED organiques).
NOTE   Lorsque le terme « produit LED, dispositif à LED ou DSE (dispositif soumis à essai) » est utilisé, le terme couvre les lampes, modules, moteurs lumière ou luminaires LED.

Svetloba in razsvetljava - Merjenje in podajanje fotometričnih podatkov sijalk in svetilk - 4. del: LED-sijalke, moduli in svetilke

Ta evropski standard določa zahteve za merjenje električnih, fotometričnih in kolorimetričnih količin svetilk LED, modulov, svetilnih mehanizmov in svetil za delovanje pri enosmerni ali izmenični napajalni napetosti, po možnosti s pripadajočo krmilno opremo. Fotometrične in kolorimetrične količine, zajete v tem standardu, vključujejo skupen svetlobni tok, svetlobno učinkovitost, delni svetlobni tok, porazdelitev svetilnosti, intenzivnost osrednjega žarka, svetilnost in porazdelitev svetilnosti, kromatske koordinate, korelirano temperaturo barve svetlobe (SCT), indeks barvne reprodukcije (CRI) in prostorsko kromatsko enotnost. Ta standard ne zajema paketov LED in izdelkov, ki temeljijo na diodah OLED (organske diode LED). OPOMBA: Kadar je uporabljen izraz »izdelek LED«, »naprava LED« ali »DUT« (naprava, ki se preskuša), ta zajema LED-sijalke, module, svetilne mehanizme ali svetila.

General Information

Status
Published
Publication Date
25-Jun-2019
Withdrawal Date
30-Dec-2019
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2020
Completion Date
02-Dec-2020

Relations

Buy Standard

Standard
EN 13032-4:2015+A1:2019
English language
71 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2019
Svetloba in razsvetljava - Merjenje in podajanje fotometričnih podatkov sijalk in
svetilk - 4. del: LED-sijalke, moduli in svetilke
Light and lighting - Measurement and presentation of photometric data of lamps and
luminaires - Part 4: LED lamps, modules and luminaires
Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen
und Leuchten - Teil 4: LED-Lampen, -Module und -Leuchten
Lumière et éclairage - Mesure et présentation des données photométriques des lampes
et des luminaires - Partie 4 : Lampes, modules et luminaires LED
Ta slovenski standard je istoveten z: EN 13032-4:2015+A1:2019
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
91.160.01 Razsvetljava na splošno Lighting in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13032-4:2015+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 17.180.20; 29.140.99 Supersedes EN 13032-4:2015
English Version
Light and lighting - Measurement and presentation of
photometric data of lamps and luminaires - Part 4: LED
lamps, modules and luminaires
Lumière et éclairage - Mesure et présentation des Licht und Beleuchtung - Messung und Darstellung
données photométriques des lampes et des luminaires photometrischer Daten von Lampen und Leuchten -
- Partie 4 : Lampes, modules et luminaires LED Teil 4: LED-Lampen, -Module und -Leuchten
This European Standard was approved by CEN on 19 March 2015 and includes Amendment 1 approved by CEN on 21 March
2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13032-4:2015+A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Laboratory requirements . 17
4.1 General . 17
4.1.1 Standard Test Conditions . 17
4.1.2 Tolerance Interval . 18
4.2 Laboratory and Environmental Conditions . 19
4.2.1 Test Room . 19
4.2.2 Ambient Temperature . 19
4.2.3 Surface Temperature (t -Point Temperature) . 20
p
4.2.4 Air Movement . 20
4.2.5 Operating Position . 21
4.3 Electrical Test Conditions and Electrical Equipment . 21
4.3.1 Test Voltage and Test Current . 21
4.3.2 Electrical Measurements . 21
4.3.3 Electrical Power Supply . 22
4.4 Stabilization before Measurement . 23
4.4.1 General . 23
4.4.2 LED Lamps and LED Luminaires . 23
4.4.3 LED Modules . 24
4.5 Photometric and Colorimetric Measurement Instruments . 24
4.5.1 General . 24
4.5.2 Spectral Responsivity Requirements for Photometers . 25
4.5.3 Integrating Sphere (all Types) . 25
4.5.4 Goniophotometer (all Types) . 27
4.5.5 Luminance Meters . 29
5 Preparation, mounting and operating conditions . 29
5.1 Ageing . 29
5.2 Test device . 30
5.3 Mounting . 30
5.3.1 Operating orientation . 30
5.3.2 Coordinate system . 30
5.3.3 Photometric Centre . 30
5.4 Operating conditions of the LED devices . 31
5.4.1 General . 31
5.4.2 LED lamps . 31
5.4.3 LED modules . 31
5.4.4 LED luminaires . 31
6 Measurement of photometric quantities . 32
6.1 General . 32
6.2 Measurement of total luminous flux . 32
6.3 Partial Luminous Flux . 33
6.3.1 !General" . 33
6.3.2 !Useful luminous flux (according regulation (EU) No 1194/2012) . 34
6.4 Luminous efficacy . 34
6.5 Luminous intensity distribution and data presentation . 35
6.5.1 General . 35
6.5.2 LED-lamps and LED-modules . 35
6.5.3 LED-luminaires . 35
6.6 Centre beam intensity and beam angles . 35
6.7 Luminance Measurements . 36
7 Measurement of colour quantities . 36
7.1 Colorimetric Measurements . 36
7.1.1 General aspects . 36
7.1.2 Correlated Colour Temperature (white LED light sources) . 37
7.1.3 Colour Rendering Indices (white LED light sources) . 38
7.1.4 Angular Colour Uniformity . 38
8 Measurement Uncertainties . 38
8.1 General . 38
8.2 Guidance for Measurement uncertainty budgets . 39
8.2.1 Common parameters to all measurements . 39
8.2.2 Luminous flux . 39
8.2.3 Luminous intensity and luminance . 41
8.2.4 Colour quantities . 41
8.2.5 Electrical power . 41
8.2.6 Luminous efficacy . 42
9 Presentation of test results . 42
9.1 Test report . 42
9.1.1 Introduction . 42
9.1.2 General information . 42
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.