EN 12385-3:2004+A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

This document specifies the type of information for use and maintenance of steel wire ropes to be provided by the
rope manufacturer or to be included in the manufacturer’s handbook that accompanies a machine, piece of
equipment or installation of which the steel wire rope forms a part.
The particular hazards covered by this document are identified in clause 4.
For steel wire ropes conforming to Parts 8 and 9 used on cableway installations designed to carry persons,
additional information for use and maintenance is given in prEN 12927-7.
For steel wire rope slings, specific information on use and maintenance is given in EN 13414-2.
This document is not applicable to steel wire ropes manufactured before the date of publication of this document by
CEN.

Drahtseile aus Stahldraht - Sicherheit - Teil 3: Informationen für Gebrauch und Instandhaltung

Dieser Teil dieser Europäischen Norm legt die Art der Informationen für den Gebrauch und die Instandhaltung von Drahtseilen aus Stahldraht fest, die der Seilhersteller bereitstellen muss oder die in der Betriebsanleitung für eine Maschine, ein Geräteteil oder eine Anlage, wovon das Seil ein Bestandteil ist, enthalten sein muss.
Die besonderen Gefährdungen nach diesem Teil der Norm werden in Abschnitt 4 behandelt.
Besondere Informationen für den Gebrauch und die Instandhaltung von Stahldrahtseilen nach Teil 8 und Teil 9 für Seilbahnen zum Transport von Personen sind in prEN 12927-7 angegeben.
Besondere Informationen für den Gebrauch und die Instandhaltung von Anschlagseilen aus Drahtseilen sind in EN 13414-2 angegeben.
Diese Europäische Norm ist nicht für Stahldrahtseile anwendbar, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden

Câbles en acier - Sécurité - Partie 3: Informations pour l'utilisation et la maintenance

Le présent document spécifie le type d’informations pour l’utilisation et la maintenance des câbles en acier que doit
fournir le fabricant de câbles ou qui doivent être incluses dans le manuel du fabricant qui accompagne une machine,
un équipement ou une installation équipée d’un câble en acier.
Les phénomènes dangereux particuliers couverts par le présent document sont identifiés à l’article 4.
Les informations spécifiques sur l’utilisation et la maintenance des câbles en acier conformes aux parties 8
et 9 utilisés sur les installations équipées de câbles prévues pour le transport de personnes sont données
dans le prEN 12927-7.
Les informations spécifiques relatives à l’utilisation et à la maintenance des élingues en acier sont données dans
l’EN 13414-2.
Le présent document n’est pas applicable aux câbles en acier fabriqués avant la date de publication de ce document
par le CEN.

Jeklene žične vrvi - Varnost - 3. del: Podatki za uporabo in vzdrževanje

General Information

• Status: Withdrawn
• Publication Date: 18-Mar-2008
• Withdrawal Date: 08-Dec-2020
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
• Drafting Committee: CEN/TC 168/WG 2 - Steel wire ropes, their terminations and wire rope slings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 09-Dec-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2014/33/EU - Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (recast)
• Directive: 95/16/EC - European Parliament and Council Directive 95/16/EC of 29 June 1995 on the approximation of the laws of the Member States relating to lifts
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Mandate: M/BC/CEN/92/3 - Standardization mandate assigned to CEN/CENELEC concerning Lifts
• Ref Project: SIST EN 12385-3:2004+A1:2008 - Steel wire ropes - Safety - Part 3: Information for use and maintenance

Relations

• Merged From: EN 12385-3:2004 - Steel wire ropes - Safety - Part 3: Information for use and maintenance
• Effective Date: 18-Jan-2023
• Replaced By: EN 12385-3:2020 - Steel wire ropes - Safety - Part 3: Information for use and maintenance
• Effective Date: 16-Dec-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel wire ropes - Safety - Part 3: Information for use and maintenanceåHYDQMHCâbles en acier - Sécurité - Partie 3: Informations pour l'utilisation et la maintenanceDrahtseile aus Stahldraht - Sicherheit - Teil 3: Informationen für Gebrauch und InstandhaltungTa slovenski standard je istoveten z:EN 12385-3:2004+A1:2008SIST EN 12385-3:2004+A1:2008en,fr77.140.65ICS:SLOVENSKI
STANDARDSIST EN 12385-3:2004+A1:200801-junij-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12385-3:2004+A1
March 2008 ICS 77.140.65 Supersedes EN 12385-3:2004 English Version
Steel wire ropes - Safety - Part 3: Information for use and maintenance
Câbles en acier - Sécurité - Partie 3: Informations pour l'utilisation et la maintenance
Drahtseile aus Stahldraht - Sicherheit - Teil 3: Informationen für Gebrauch und Instandhaltung This European Standard was approved by CEN on 22 July 2004 and includes Amendment 1 approved by CEN on 14 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12385-3:2004+A1:2008: E



EN 12385-3:2004+A1:2008 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 List of significant hazards.5 5 Safety instructions and information for use and maintenance.6 Annex A (informative)
Example of general information for use and maintenance.7 Annex B (informative)
Guidance on rope selection.13 Annex C (informative)
Material health and safety information on steel wire rope and its component parts.18 Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.21 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC.22 Annex ZC (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 95/16/EC.23 Bibliography.24



EN 12385-3:2004+A1:2008 (E) 3 Foreword This document (EN 12385-3:2004+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety”, the secretariat of w
...