EN ISO 18542-1:2012
(Main)Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
ISO 18542 is structured in two parts:
Part 1 defines a framework and a process for agreeing terms;
Part 2 defines the process implementation requirements for a terminology management system and for a Registration Authority with a digital annex.
The basic purpose of ISO 18542 is to facilitate searching of vehicle manufacturer (VM) repair and maintenance information (RMI) websites by independent operators (IOs).
ISO 18542-1:2012 provides a general overview and structure of each part of ISO 18542. It also specifies use cases related to repair and maintenance information (RMI) terminology in order to standardize the access to RMI for IOs.
The provision of the agreed automotive RMI terminology itself is outside the remit of ISO 18542 and therefore outside the scope of ISO 18542-1:2012. Rather, it is foreseen that the agreed automotive RMI terminology will follow a lifecycle beyond the timeframe of ISO 18542. It will be dependent upon the work of a Registration Authority, a Terminology Review Group for its creation and management, and of a digital annex for its publication. For the development of the digital annex, existing standards will be reviewed and elements included where appropriate and practical.
Straßenfahrzeuge - Standardisierte Terminologie für Reparatur- und Wartungsinformationen (RMI) - Teil 1: Allgemeine Informationen und Beschreibung der Anwendungsfälle (ISO 18542-1:2012)
ISO 18542 besteht aus 2 Teilen:
- Teil 1 legt die Grundstruktur und den Prozess für übereinstimmende Begriffe fest.
- Teil 2 behandelt die Definition von Anforderungen für die Prozessimplementierung für ein Terminologie-Managementsystem und für eine Registrierungsstelle mit einem digitalen Anhang.
Die Grundabsicht von ISO 18542 ist die Unterstützung der Suche der unabhängigen Marktteilnehmer (IOs) von Reparatur- und Instandhaltungsinformationen (RMI) auf Websites der Fahrzeughersteller (VM).
Dieser Teil der ISO 18542 beinhaltet allgemeine Informationen, die einen allgemeinen Überblick und Struktur über jeden Teil der ISO 18542 geben. Die Norm legt außerdem Anwendungsfälle bezogen auf die Terminologie von Reparatur- und Wartungsinformationen (RMI) fest, um den Zugriff von RMI für unabhängige Markteilnehmer zu standardisieren.
Die Bereitstellung der festgelegten Terminologie für RMI von Fahrzeugen liegt außerhalb der Aufgabenstellung der ISO 18542 und ist deshalb nicht Teil des Anwendungsbereiches der ISO 18542. Es ist eher vorherzusehen, dass die Beschäftigung mit festgelegter Terminologie für RMI von Fahrzeugen über den Zeitrahmen der ISO 18542 hinausgehen wird. Dies hängt von der Erstellung und Verwaltung der Terminologie durch eine Registrierungsstelle und eine Terminologie Prüfungsgruppe ab sowie von der Entwicklung eines digitalen Anhangs für die Veröffentlichung der Terminologie. Für die Entwicklung eines digitalen Anhangs werden bereits vorhandene Normen überprüft und geeignete und praktische Elemente eingeschlossen.
Véhicules routiers - Terminologie normalisée pour l'information sur la réparation et la maintenance (RMI) - Partie 1: Informations générales et définition de cas d'utilisation (ISO 18542-1:2012)
L'ISO 18542 comporte deux parties:
la Partie 1 définit un cadre et un processus d'approbation de termes;
la Partie 2 définit les exigences de mise en ?uvre d'un processus relatif à un système de gestion terminologique et à une autorité d'enregistrement, avec une annexe numérique.
L'objectif fondamental de l'ISO 18542 est de faciliter la recherche par des opérateurs indépendants (OI) sur les sites Web d'information sur la réparation et la maintenance (RMI, repair and maintenance information) des constructeurs de véhicules (VM, vehicle manufacturers).
L'ISO 18542-1:2012 donne un aperçu général et la structure de chaque partie de la norme. Elle spécifie également des cas d'utilisation relatifs à la terminologie pour l'information sur la réparation et la maintenance (RMI) afin de normaliser l'accès aux RMI pour des opérateurs indépendants.
La fourniture de la terminologie RMI convenue pour l'automobile ne relève pas de l'ISO 18542 et ne fait donc pas partie du domaine d'application de l'ISO 18542-1:2012. Il est plutôt prévu que la terminologie RMI convenue pour l'automobile suive un cycle de vie allant au-delà de l'échéance de l'ISO 18542. Elle dépendra des travaux d'une autorité d'enregistrement, d'un groupe de révision de la terminologie pour sa création et sa gestion et d'une annexe numérique pour sa publication. En ce qui concerne l'élaboration de l'annexe numérique, des normes existantes seront revues et des éléments seront inclus si cela est approprié et possible.
Cestna vozila - Standardizirana terminologija za popravila in vzdrževanje - 1. del: Splošna informacija in definicija primera uporabe (ISO 18542-1:2012)
Standard ISO 18542 je sestavljen iz dveh delov: – ta del standarda ISO 18542 določa okvir in postopek za usklajevanje izrazov; – 2. del določa zahteve za izvajanje postopka za sistem vodenja terminologije in za registracijski organ z digitalnim dodatkom. Osnovni namen standarda ISO 18542 je olajšati iskanje spletnih mest proizvajalca vozila z informacijami o popravilih in vzdrževanju s strani samostojnih izvajalcev. Ta del standarda ISO 18542 podaja splošen pregled in sestavo vsakega dela standarda ISO 18542. Prav tako določa primere uporabe, povezane s terminologijo za popravila in vzdrževanje, za standardizacijo dostopa do informacij o popravilih in vzdrževanju za samostojne izvajalce. Zagotovitev dogovorjene terminologije za popravila in vzdrževanje za motorna vozila ni v pristojnosti standarda ISO 18542, zato je ta del standarda ISO 18542 ne obravnava. Življenjski cikel dogovorjene terminologije za popravila in vzdrževanje za motorna vozila bo predvidoma presegel časovni okvir standarda ISO 18542. Od dela registracijskega organa in skupine za pregled terminologije bosta odvisna njegov nastanek in vodenje, od digitalnega dodatka pa njegova objava. Za pripravo digitalnega dodatka se bodo pregledali veljavni standardi, ki jim bodo dodani elementi, kadar bo to primerno in praktično.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2013
Cestna vozila - Standardizirana terminologija za popravila in vzdrževanje - 1. del:
Splošna informacija in definicija primera uporabe (ISO 18542-1:2012)
Road vehicles - Standardized repair and maintenance information (RMI) terminology -
Part 1: General information and use case definition (ISO 18542-1:2012)
Straßenfahrzeuge - Standardisierte Terminologie für Reparatur- und
Wartungsinformationen (RMI) - Teil 1: Allgemeine Informationen und Beschreibung der
Anwendungsfälle (ISO 18542-1:2012)
Véhicules routiers - Terminologie normalisée pour l'information sur la réparation et la
maintenance (RMI) - Partie 1: Informations générales et définition de cas d'utilisation
(ISO 18542-1:2012)
Ta slovenski standard je istoveten z: EN ISO 18542-1:2012
ICS:
01.040.43 Cestna vozila (Slovarji) Road vehicle engineering
(Vocabularies)
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 18542-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 01.040.43; 43.180; 43.040.15
English Version
Road vehicles - Standardized repair and maintenance
information (RMI) terminology - Part 1: General information and
use case definition (ISO 18542-1:2012)
Véhicules routiers - Terminologie normalisée pour Straßenfahrzeuge - Standardisierte Terminologie für
l'information sur la réparation et la maintenance (RMI) - Reparatur- und Wartungsinformationen (RMI) - Teil 1:
Partie 1: Informations générales et définition de cas Allgemeine Informationen und Beschreibung der
d'utilisation (ISO 18542-1:2012) Anwendungsfälle (ISO 18542-1:2012)
This European Standard was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18542-1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword . 3
Foreword
This document (EN ISO 18542-1:2012) has been prepared by Technical Committee CEN/TC 301 “Road
vehicles”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 22
"Road vehicles".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
INTERNATIONAL ISO
STANDARD 18542-1
First edition
2012-12-01
Road vehicles — Standardized repair
and maintenance information (RMI)
terminology —
Part 1:
General information and use case
definition
Véhicules routiers — Terminologie normalisée pour l’information sur
la réparation et la maintenance (RMI) —
Partie 1: Informations générales et définition de cas d’utilisation
Reference number
ISO 18542-1:2012(E)
©
ISO 2012
ISO 18542-1:2012(E)
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 18542-1:2012(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 4
4 Standard and implementation . 4
4.1 Overview of ISO 18542 . 4
5 Standardized RMI terminology - General information and overview .5
5.1 Fundamental principles . 5
5.2 Scope of the agreed VM RMI terminology . 5
5.3 Usage of the RMI terminology in the context of the RMI system . 6
5.4 Implementation aspects of the process . 6
6 TMS use case overview . 7
6.1 Use case clusters . 7
7 Process and object descriptions . 8
7.1 Process users . 8
7.2 Process objects . 9
8 TMS terminology use case definition . 9
8.1 UC1 User Registration, User Administration, TMS Administration and Change
Control Board . 9
8.2 UC2 Terminology Interrogation .12
8.3 UC 3 Term proposal .13
8.4 UC 4 Term translation process .15
8.5 UC5 Terminology output provided for VM use .16
8.6 UC 6 Publish terminology output for digital annex .16
Annex A (informative) Terminology guidelines - Guidelines for selecting and creating terms .18
Bibliography .23
ISO 18542-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18542-1 was prepared by Technical Committee CEN/CENELEC/TC 301, Road vehicles in collaboration
with Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment.
ISO 18542 consists of the following parts, under the general title Road vehicles — Standardized repair
and maintenance information (RMI) terminology:
— Part 1: General information and use case definition
— Part 2: Standardized process implementation requirements, Registration Authority
iv © ISO 2012 – All rights reserved
ISO 18542-1:2012(E)
Introduction
ISO 18542 includes the requirements to be fulfilled by repair and maintenance information (RMI)
systems as applied by the:
EUROPEAN COMMISSION - ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL, Consumer goods -
Automotive industry EC mandate M/421 [3]
“MANDATE TO THE EUROPEAN STANDARDIZATION ORGANISATIONS FOR STANDARDIZATION IN
THE FIELD OF VEHICLE OBD, REPAIR AND MAINTENANCE INFORMATION”
dated Brussels, 21 January 2008.
This mandate relates to the EC type-approval system for vehicles falling into the scopes of Directives
2002/24/EC [5], 2003/37/EC [6] and 2007/46/EC) [7], and, in particular, to requirements for access to
vehicle repair and maintenance information by independent operators.
At this time, ISO 18542 only covers the terminology for access to automotive repair and maintenance
1)
information for light passenger and commercial vehicles based on Directive 2007/46/EC [7].
The purpose of the EC Mandate M/421 [3] is to develop a standard or set of standards which specif
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.