SIST EN ISO 8618:1999

Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995)

Kunststoffe - Flüssige Phenolharze - Konventionsverfahren zur Bestimmung der nichtflüchtigen Anteile (ISO 8618:1995)

Diese Internationale Norm legt ein Verfahren zur konventionellen Bestimmung der nichtflüchtigen Anteile von flüssigen Phenolharzen (Resolen, Novolak-Lösungen usw.) fest. Sie kann für die käuflichen Marktprodukte oder die Harze während der verschiedenen Stadien ihrer Verarbeitung verwendet werden. ANMERKUNG 1: Der Begriff "nichtflüchtige Anteile" bezieht sich bei Phenolharzen auf bestimmte definierte Versuchsbedingungen (siehe 4.2, Anmerkung 1). Die nach diesem Verfahren erzielten Ergebnisse können von denen bei der industriellen Anwendung der Harze abweichen.

Plastiques - Résines phénoliqes liquides - Détermination de l'extrait sec conventionnel (ISO 8618:1995)

Polimerni materiali – Tekoče fenolne smole - Določevanje nehlapne snovi s klasično metodo (ISO 8618:1995)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1999
• Withdrawal Date: 30-Jun-2003
• ICS: 83.080.10 - Thermosetting materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jul-2003
• Due Date: 01-Jul-2003
• Completion Date: 01-Jul-2003
• Ref Project: EN ISO 8618:1998 - Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995)

Relations

• Replaced By: SIST EN ISO 3251:2003 - Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2003)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8618:1999
01-maj-1999
3ROLPHUQLPDWHULDOL±7HNRþHIHQROQHVPROH'RORþHYDQMHQHKODSQHVQRYLV
NODVLþQRPHWRGR,62
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO
8618:1995)
Kunststoffe - Flüssige Phenolharze - Konventionsverfahren zur Bestimmung der
nichtflüchtigen Anteile (ISO 8618:1995)
Plastiques - Résines phénoliqes liquides - Détermination de l'extrait sec conventionnel
(ISO 8618:1995)
Ta slovenski standard je istoveten z: EN ISO 8618:1998
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 8618:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8618:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 8618:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 8618:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 8618:1999
INTERNATIONAL
STANDARD
Second edition
1995-12-15
Plastics - Liquid phenolic resins -
Conventional determination of non-volatile
matter
Plas tiques - Rbsines phbnoliques liquides - Determination de I’extrait
sec conven tionnel
Reference number
ISO 8618:1995(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 8618:1999
ISO 8618:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bedies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 8618 was prepared by Technical Committee
lSO/TC 61, Plastics, Subcommittee SC 12, Thermosetting materjak.
This second edition cancels and replaces the first edition (ISO 8618:1987)
which has been revised to include an air circulation oven as an alternative
to the static convection oven.
Annex A forms an integral part of this International Standard.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronie or mechanical, including
photocopying and microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 8618:1999
INTERNATIONAL STANDARD @ ISO ISO 8618:1995(E)
- Liquid phenolic resins - Conventional
Plastics
determination of non-volatile matter
3.2 . Precision balance, accurate to 1 mg.
1 Scope
This International Standard specifies a method for the
3.3 Static convection oven, with natura1 Ventilation,
conventional determination of the non-volatile matter
with a perforated metal shelf placed at one-third of the
of liquid phenolic resins (resols, novolak solutions,
height of the oven and capable of being maintained at
etc.). lt tan be used for commercial products or for
the test temperature (see 4.2).
resins in their various stages of manufacture.
or
NOTE 1 For phenolic resins, the term “non-volatile mat-
ter” is based upon arbitrary test conditions (see 4.2, Air circulation oven, with horizontal Ventilation, having
note 3). Results obtained by this method may not agree
an air circulation Speed of 0,8 m/s to 1,2 m/s.
with the results obtained in industrial applications of these
resins.
The type of oven used shall be stated in the test re-
port since the results of the test depend on the type
used (static convection or air circulation).
2 Definition
3.4 Desiccator, containing dehydrated Calcium chloride
or other suitable drying agent.
For the purpose of this International Standard, the
following definition applies.
2. l non-volatile matter: The percentage residue
4 Procedure
obtained when the volatile components of a specific
mass of a liquid phenolic resin are evaporated under
4.1 Degrease a small dish (3.11, dry it in the oven
specified conditions of temperature and time.
(3.3), maintained at 135 “C (or the selected test tem-
perature, see 4.2),
...