SIST EN 13375:2019
(Main)Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation
This document is one of a series of documents applicable to flexible sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles.
This document specifies:
- the composition, the characteristics and the preparation procedure of the base specimen concrete slabs;
- the composition, the characteristics and the preparation procedure of different bituminous mixtures for the asphalt layer;
- the rules for the preparation of specimens.
This document outlines the specimen preparation for tests on the waterproofing systems which are referred to in the different test standards.
Abdichtungsbahnen - Abdichtung für Betonbrücken und andere Verkehrsflächen aus Beton - Probenvorbereitung
Dieses Dokument ist Teil einer Reihe von Dokumenten für flexible Abdichtungsbahnen für Betonbrücken und andere Verkehrsflächen aus Beton.
Dieses Dokument enthält Festlegungen für:
- die Zusammensetzung, die Eigenschaften und das Verfahren der Vorbereitung von Grundkörpern aus Betonplatten;
- die Zusammensetzung, die Eigenschaften und das Verfahren der Vorbereitung von unterschiedlichen Bitumenmischungen für die Asphaltschicht;
- die Regeln für die Vorbereitung der Probekörper.
Dieses Dokument behandelt die Herstellung der Probekörper für Prüfungen an den Abdichtungssystemen, auf die in den verschiedenen Prüfnormen Bezug genommen wird.
Feuilles souples d'étanchéité - Étanchéité des tabliers de ponts en béton et autres surfaces en béton circulables par les véhicules - Préparation des éprouvettes
La présente Norme européenne fait partie d'une série de normes applicables aux feuilles souples d'étanchéité pour les tabliers de ponts en béton et autres surfaces en béton destinées à la circulation des véhicules.
Le présent document spécifie :
- la composition, les caractéristiques et la méthode de préparation des dalles en béton utilisées comme supports d'éprouvettes;
- la composition, les caractéristiques et la méthode de préparation des différents mélanges bitumineux constituant la couche bitumineuse;
- les règles de préparation des éprouvettes.
Ce document décrit la préparation des échantillons pour les essais sur les systèmes d’étanchéité mentionnés dans les différentes normes d’essais.
Hidroizolacijski trakovi - Hidroizolacija betonskih premostitvenih objektov in drugih betonskih povoznih površin - Priprava preskušancev
Ta evropski standard spada v skupino standardov, ki se uporabljajo za hidroizolacijske trakove za betonske premostitvene objekte in druge betonske povozne površine.
Ta dokument določa:
– sestavo, lastnosti in postopek priprave osnovnih betonskih plošč preskušancev;
– sestavo, lastnosti in postopek priprave različnih bitumenskih zmesi za asfaltno plast;
– pravila za pripravo preskušancev.
General Information
- Status
- Published
- Public Enquiry End Date
- 14-Jan-2018
- Publication Date
- 30-May-2019
- Technical Committee
- VLA - Water proofing
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 25-Apr-2019
- Due Date
- 30-Jun-2019
- Completion Date
- 31-May-2019
Relations
- Effective Date
- 01-Jul-2019
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN 13108-1:2016 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 13375:2019 specifies the procedures for the preparation of test specimens used for evaluating waterproofing systems applied to concrete bridge decks and other concrete surfaces trafficable by vehicles. This European standard is essential for ensuring the consistency and reliability of tests performed on flexible sheets for waterproofing, helping manufacturers, laboratories, and project owners to accurately assess product performance.
This standard covers:
- Preparation and characteristics of concrete slabs used as base specimens
- Composition and preparation procedures for bituminous mixtures used in asphalt layers
- Rules for preparing and handling specimens as referenced in test standards
SIST EN 13375 is part of a series focused on flexible sheet waterproofing systems, forming a cornerstone in the quality assurance and durability testing of waterproofing membranes for concrete infrastructure.
Key Topics
- Base Specimen Concrete Slabs: Outlines requirements for concrete composition, slab thickness, surface cleanliness, and roughness based on EN 1766 guidelines.
- Bituminous Mixture Preparation: Specifies procedures for mastic asphalt, asphalt concrete, and porous asphalt overlays following EN 13108-1, EN 13108-6, and EN 13108-7.
- Specimen Types: Defines various specimen configurations including combinations of base slab, waterproofing system, and asphalt layer.
- Application of Waterproofing Systems: Details correct methods for applying waterproofing sheets and any protective asphalt layers, in accordance with manufacturer instructions and relevant standards.
- Specimen Handling and Storage: Provides instructions for sawing, storing, and timing test specimens to ensure testing integrity.
- Comprehensive Test Reporting: Specifies information requirements for documenting specimen preparation and conditions in accordance with referenced test procedures.
Applications
The procedures and requirements specified in SIST EN 13375:2019 are widely applicable within the construction and infrastructure sectors, particularly for:
- Bridge Deck Waterproofing: Ensures repeatable, reliable specimen preparation for performance testing of membranes used under vehicular traffic.
- Roadway and Concrete Structure Protection: Supports quality control and compliance in projects requiring durable protection against water ingress for trafficable concrete surfaces.
- Product Development and Certification: Provides laboratories and manufacturers with clear specimen preparation guidance for the independent testing and certification of flexible waterproofing sheets.
- Tendering and Regulatory Compliance: Offers project owners and contractors a recognized reference for verifying that waterproofing systems have undergone rigorous and standardized testing.
Applying this standard helps deliver higher confidence in the long-term waterproofing performance of critical concrete infrastructure, supporting both safety and asset longevity.
Related Standards
SIST EN 13375:2019 references several key European standards to ensure specimen preparation aligns with broader test and material specifications, including:
- EN 1766: Reference concretes for testing protection and repair products.
- EN 13036-1: Measurement of pavement surface macrotexture depth.
- EN 13108 series: Specifications for asphalt concrete, mastic asphalt, and porous asphalt.
- EN 13596: Determination of bond strength for waterproofing systems.
- EN 13653: Measurement of shear strength.
- EN 14224: Testing crack bridging ability of waterproofing membranes.
- EN 14692: Resistance to compaction of asphalt layers.
- EN 14693: Behavior of waterproofing sheets during mastic asphalt application.
- EN 14695, EN 17048: Definitions and characteristics of bituminous and plastic/rubber waterproofing sheets.
These related standards underpin specimen characterization and ensure cross-compatibility and recognition across the European construction and testing sectors.
By adhering to SIST EN 13375:2019, stakeholders ensure that flexible waterproofing systems for concrete bridge decks and other vehicle-trafficked surfaces are tested under uniform and rigorous conditions, improving trust in certification results and optimizing infrastructure durability.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Zavod za gradbeništvo Slovenije (ZAG) - Inšpekcija
ZAG inspection body for construction products, structures, and materials.
Sponsored listings
Frequently Asked Questions
SIST EN 13375:2019 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation". This standard covers: This document is one of a series of documents applicable to flexible sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. This document specifies: - the composition, the characteristics and the preparation procedure of the base specimen concrete slabs; - the composition, the characteristics and the preparation procedure of different bituminous mixtures for the asphalt layer; - the rules for the preparation of specimens. This document outlines the specimen preparation for tests on the waterproofing systems which are referred to in the different test standards.
This document is one of a series of documents applicable to flexible sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. This document specifies: - the composition, the characteristics and the preparation procedure of the base specimen concrete slabs; - the composition, the characteristics and the preparation procedure of different bituminous mixtures for the asphalt layer; - the rules for the preparation of specimens. This document outlines the specimen preparation for tests on the waterproofing systems which are referred to in the different test standards.
SIST EN 13375:2019 is classified under the following ICS (International Classification for Standards) categories: 91.100.30 - Concrete and concrete products; 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13375:2019 has the following relationships with other standards: It is inter standard links to SIST EN 13375:2005, SIST EN 14224:2010, SIST EN 13108-6:2016, SIST EN 13596:2005, SIST EN 1766:2017, SIST EN 13108-1:2016, SIST EN 14695:2010, SIST EN 13036-1:2010, kSIST prEN 17048:2017, SIST EN 13108-7:2016, SIST EN 13653:2017, SIST EN 14692:2017, SIST EN 14693:2017, SIST-TS CEN/TS 17048:2024, SIST EN ISO 13141:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13375:2019 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 13375:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 13375:2005
Hidroizolacijski trakovi - Hidroizolacija betonskih premostitvenih objektov in
drugih betonskih povoznih površin - Priprava preskušancev
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other
concrete surfaces trafficable by vehicles - Specimen preparation
Abdichtungsbahnen - Abdichtung für Betonbrücken und andere Verkehrsflächen aus
Beton - Probenvorbereitung
Feuilles souples d'étanchéité - Étanchéité des tabliers de ponts en béton et autres
surfaces en béton circulables par les véhicules - Préparation des éprouvettes
Ta slovenski standard je istoveten z: EN 13375:2019
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13375
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 13375:2004
English Version
Flexible sheets for waterproofing - Waterproofing of
concrete bridge decks and other concrete surfaces
trafficable by vehicles - Specimen preparation
Feuilles souples d'étanchéité - Étanchéité des tabliers Abdichtungsbahnen - Abdichtung für Betonbrücken
de ponts en béton et autres surfaces en béton und andere Verkehrsflächen aus Beton -
circulables par les véhicules - Préparation des Probenvorbereitung
éprouvettes
This European Standard was approved by CEN on 18 February 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13375:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Specimens . 6
5 Base specimens . 7
5.1 General . 7
5.2 Specification of the concrete . 8
5.3 Surface roughness . 8
6 Application of the waterproofing system . 8
7 Asphalt layer . 9
7.1 Specifications . 9
7.1.1 General . 9
7.1.2 Mastic asphalt (MA, LMA) . 9
7.1.3 Asphalt concrete (AC) . 10
7.1.4 Porous asphalt (PA). 10
7.2 Laying and compaction . 10
7.3 Specimens type 2 . 10
8 Preparation of test specimens . 10
9 Storing . 11
10 Test report . 11
Bibliography . 12
European foreword
This document (EN 13375:2019) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for
waterproofing”, the secretariat of which is held by NEN.
This document shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by October 2019, and conflicting national standards shall be withdrawn at the latest
by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13375:2004.
— Change of Foreword into European Foreword;
— Clause 2, Normative references has been updated with citation of Bituminous mixtures specifications
EN13108-1, and -6 and -7; prEN17048 has been introduced;
— Clause 4, Table 1 has been updated with citation of EN numbers at each test method;
— Subclause 5.2 updated with the use of CEM I 52.5 N;
— Clause 6, Note 1 has been split into Note 1 and Note 2;
— Section 7.1.2, Mastic asphalt has been updated to EN13108-6 standard, and Grading (Figure 3) has been
deleted;
— Section 7.1.3, now “Asphalt Concrete", has been updated according to EN 13108-1 (previous title was
"Coarse bituminous mixture”);
— Section 7.1.4 “Porous Asphalt“ has been introduced as new section, according to EN13108-7.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Introduction
The purpose of this document is to give rules for the preparation of specimens for performance related tests
on waterproofing systems. This document also includes specifications for the base specimen concrete and for
the bituminous mixes for the asphalt layer in contact with the waterproofing and used for the test.
1 Scope
This document is one of a series of documents applicable to flexible sheets for waterproofing of concrete
bridge decks and other concrete surfaces trafficable by vehicles.
This document specifies:
— the composition, the characteristics and the preparation procedure of the base specimen concrete slabs;
— the composition, the characteristics and the preparation procedure of different bituminous mixtures for
the asphalt layer;
— the rules for the preparation of specimens.
This document outlines the specimen preparation for tests on the waterproofing systems which are referred
to in the different test standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 1766:2017, Products and systems for the protection and repair of concrete structures — Test methods —
Reference concretes for testing
EN 13036-1, Road and airfield surface characteristics — Test methods — Part 1: Measurement of pavement
surface macrotexture depth using a volumetric patch technique
EN 13108-1, Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete
EN 13108-6, Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt
EN 13108-7, Bituminous mixtures — Material specifications — Part 7: Porous Asphalt
EN 13596, Flexible sheets for waterproofing
...