Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire (IEC 60317-0-3:2008/A2:2019)

This part of IEC 60317 specifies the general requirements of enamelled round aluminium winding wires with or without a bonding layer. The range of nominal conductor diameters is given in the relevant specification sheet. When reference is made to a winding wire according to a standard of the IEC 60317 series mentioned under Clause 2, the following information is given in the description: - reference to IEC specification; - nominal conductor diameter, in millimetres; - grade.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3: Allgemeine Anforderungen - Runddrähte aus Aluminium, lackisoliert (IEC 60317-0-3:2008/A2:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences générales - Fil de section circulaire en aluminium émaillé (IEC 60317-0-3:2008/A2:2019)

Specifikacije za posebne vrste navijalnih žic - 0-3. del: Splošne zahteve - Emajliran okrogel aluminijev vodnik - Dopolnilo A2 (IEC 60317-0-3:2008/A2:2019)

General Information

Status
Published
Publication Date
03-Nov-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Oct-2019
Due Date
28-Dec-2019
Completion Date
04-Nov-2019

RELATIONS

Buy Standard

Amendment
SIST EN 60317-0-3:2008/A2:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60317-0-3:2008/A2:2019
01-december-2019

Specifikacije za posebne vrste navijalnih žic - 0-3. del: Splošne zahteve - Emajliran

okrogel aluminijev vodnik - Dopolnilo A2 (IEC 60317-0-3:2008/A2:2019)

Specifications for particular types of winding wires - Part 0-3: General requirements -

Enamelled round aluminium wire (IEC 60317-0-3:2008/A2:2019)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3:
Allgemeine Anforderungen - Runddrähte aus Aluminium, lackisoliert (IEC 60317-0-
3:2008/A2:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences

générales - Fil de section circulaire en aluminium émaillé (IEC 60317-0-3:2008/A2:2019)

Ta slovenski standard je istoveten z: EN 60317-0-3:2008/A2:2019
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 60317-0-3:2008/A2:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60317-0-3:2008/A2:2019
---------------------- Page: 2 ----------------------
SIST EN 60317-0-3:2008/A2:2019
EUROPEAN STANDARD EN 60317-0-3:2008/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 0-3:
General requirements - Enamelled round aluminium wire
(IEC 60317-0-3:2008/A2:2019)

Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von

Partie 0-3: Exigences générales - Fil de section circulaire Wickeldrähten - Teil 0-3: Allgemeine Anforderungen -

en aluminium émaillé Runddrähte aus Aluminium, lackisoliert
(IEC 60317-0-3:2008/A2:2019) (IEC 60317-0-3:2008/A2:2019)

This amendment A2 modifies the European Standard EN 60317-0-3:2008; it was approved by CENELEC on 2019-09-24. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 60317-0-3:2008/A2:2019 E
---------------------- Page: 3 ----------------------
SIST EN 60317-0-3:2008/A2:2019
EN 60317-0-3:2008/A2:2019 (E)
European foreword

The text of document 55/1783/FDIS, future IEC 60317-0-3/A2, prepared by IEC/TC 55 "Winding wires"

was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60317-0-3:2008/A2:2019.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2020-06-24

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2022-09-24

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 60317-0-3:2008/A2:2019 was approved by CENELEC as a

European Standard without any m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.