SIST EN ISO 18273:2004
(Main)Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004)
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004)
This standard specifies requirements for classification of solid wires and rods for fusion welding of aluminium and aluminium alloys. The classification of the solid wires and rods is based on their chemical composition.
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Aluminium und Aluminiumlegierungen - Einteilung (ISO 18273:2004)
Diese Norm legt Anforderungen für die Einteilung von Massivdrähten und Massivstäben zum Schmelz-schweißen von Aluminium und Aluminiumlegierungen fest. Die Einteilung der Massivdrähte und Massivstäbe erfolgt nach ihrer chemischen Zusammensetzung.
Produits consommables pour le soudage - Fils-électrodes, fils et baguettes pour le soudage de l'aluminium et les alliages d'aluminium - Classification (ISO 18273:2004)
La présente norme spécifie les exigences pour la classification des fils pleins et des baguettes pleines pour le soudage par fusion de l'aluminium et des alliages d'aluminium. La classification des fils pleins et des baguettes pleines est basée sur leur composition chimique.
Dodajni materiali za varjenje - Žice in palice za varjenje aluminija in aluminijevih zlitin - Razvrstitev (ISO 18273:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18273:2004
01-september-2004
Dodajni materiali za varjenje - Žice in palice za varjenje aluminija in aluminijevih
zlitin - Razvrstitev (ISO 18273:2004)
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and
aluminium alloys - Classification (ISO 18273:2004)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Aluminium und
Aluminiumlegierungen - Einteilung (ISO 18273:2004)
Produits consommables pour le soudage - Fils-électrodes, fils et baguettes pour le
soudage de l'aluminium et les alliages d'aluminium - Classification (ISO 18273:2004)
Ta slovenski standard je istoveten z: EN ISO 18273:2004
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 18273:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18273:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 18273:2004
EUROPEAN STANDARD
EN ISO 18273
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2004
ICS 25.160.20
English version
Welding consumables - Wire electrodes, wires and rods for
welding of aluminium and aluminium alloys - Classification (ISO
18273:2004)
Produits consommables pour le soudage - Fils-électrodes, Schweißzusätze - Massivdrähte und -stäbe zum
fils et baguettes pour le soudage de l'aluminium et les Schmelzschweißen von Aluminium und
alliages d'aluminium - Classification (ISO 18273:2004) Aluminiumlegierungen - Einteilung (ISO 18273:2004)
This European Standard was approved by CEN on 10 October 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18273:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18273:2004
EN ISO 18273:2004 (E)
Contents Page
Foreword. 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Classification. 5
4 Symbols and requirements. 5
4.1 Symbols for the product form . 5
4.2 Symbol for the chemical composition. 5
5 Mechanical properties of the weld metal. 5
6 Chemical analysis. 6
7 Retest . 6
8 Technical delivery conditions. 6
9 Designation. 9
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18273:2004
EN ISO 18273:2004 (E)
Foreword
This document (EN ISO 18273:2004) has been prepared by Technical Committee CEN/TC 121 “Welding”, the
secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 44 “Welding and allied
processes”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2004, and conflicting national standards shall be
withdrawn at the latest by September 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18273:2004
EN ISO 18273:2004 (E)
Introduction
For aluminium welding consumables there is no unique relationship between the product form (solid wire or
rod) and the welding process used (e.g. gas shielded metal arc welding, gas tungsten arc welding, plasma arc
welding or other welding processes). For this reason the solid wires or rods may be classified on the basis of
any of the above product forms and can be used as appropriate, for more than one of the above processes.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 18273:2004
EN ISO 18273:2004 (E)
1 Scope
This standard specifies requirements for classification of solid wires and rods for fusion welding of aluminium
and aluminium alloys. The classification of the solid wires and rods is based on their chemical composition.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to
this European Standard only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies (including amendments).
EN ISO 544, Welding consumables – Technical delivery conditions for welding filler metals – Type of product,
dimensions, tolerances and markings (ISO 544:2003).
ISO 31-0:1992, Quantities and units – Part 0: General principles.
ISO 14344, Welding and allied processes – Flux and gas shielded electrical welding processes – Procurement
guidelines for consumables.
3 Classification
The classification is divided into two parts:
a) the fi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.