iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 287-1:1996/A1:2001

(Amendment)

Approval testing of welders - Fusion welding - Part 1: Steels

Approval testing of welders - Fusion welding - Part 1: Steels

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle

Qualification des soudeurs - Soudage par fusion - Partie 1: Aciers

Preskušanje za odobritev varilcev - Talilno varjenje - 1. del: Jekla - Dopolnilo 1

General Information

Status
Withdrawn
Publication Date
30-Nov-2001
Withdrawal Date
31-Oct-2004
ICS
25.160.10 - Welding processes
Technical Committee
VAR - Welding
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Nov-2004
Due Date
01-Nov-2004
Completion Date
01-Nov-2004
Ref Project
EN 287-1:1992/A1:1997 - Approval testing of welders - Fusion welding - Part 1: Steels

Relations

Replaced By
SIST EN 287-1:2004/AC:2004 - Qualification test of welders - Fusion welding - Part 1: Steels
Effective Date
01-Nov-2004
Replaced By
SIST EN 287-1:2004 - Qualification test of welders - Fusion welding - Part 1: Steels
Effective Date
01-Nov-2004
Amends
SIST EN 287-1:1996 - Approval testing of welders - Fusion welding - Part 1: Steels
Effective Date
01-Dec-2001

Buy Standard

EN 287-1:1996/A1:2001EN 287-1:1996/A1:2001
PreviousNext
Amendment
EN 287-1:1996/A1:2001
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 287-1:1996/A1:2001
01-december-2001
Preskušanje za odobritev varilcev - Talilno varjenje - 1. del: Jekla - Dopolnilo 1
Approval testing of welders - Fusion welding - Part 1: Steels
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle
Qualification des soudeurs - Soudage par fusion - Partie 1: Aciers
Ta slovenski standard je istoveten z: EN 287-1:1992/A1:1997
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN 287-1:1996/A1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 287-1:1996/A1:2001

---------------------- Page: 2 ----------------------

SIST EN 287-1:1996/A1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 17663:2023(Main)
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2023)
EN ISO 17663:2023

ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels, but can be used for other materials, as appropriate.
ISO 17663:2009 provides guidance for manufacturers that perform heat treatment or produce heat-treated products or components. ISO 17663:2009 can also be used as a basis for assessing the manufacturer in respect to its heat treatment capability.
ISO 17663:2009 is intended to be a flexible framework for the control of heat treatment processes. The fulfilment of a requirement can be waived where justification can be provided that a specific requirement is not applicable to a specific process.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25980:2023(Main)
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023)
EN ISO 25980:2023

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind.
The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m.
Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2.
This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15610:2023(Main)
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2023)
EN ISO 15610:2023

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607.
In addition, it gives the range of qualification.
Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service.
This document is limited to:
—    parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2);
—    fillet welds with throat thickness a ≥ 1 mm.
This document is not applicable when any of the following is specified for the welded joint:
a)      hardness;
b)      impact properties;
c)       preheating;
d)      controlled heat input;
e)      interpass temperature;
f)       post-weld heat treatment.
The use of this document can also be restricted by an application standard, specification or other documents.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25901-2:2023(Main)
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
EN ISO 25901-2:2023

This document contains terms and definitions applicable to health and safety in welding and allied processes. It is intended to be referenced in other documents dealing with this subject. In cases where such documents provide terms and definitions differing from those contained herein, the terms and definitions given in those documents apply.
In the main body of this document, terms are arranged in a systematic order. Annex A to C provide indexes in which all terms are listed alphabetically in English, French and German, with reference to the appropriate subclauses and translations of the terms in each and other languages.

  • Standard
    86 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18278-1:2022(Main)
Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
EN ISO 18278-1:2022

This document specifies procedures for assessing the generic weldability for resistance spot, seam and
projection welding of uncoated and coated metals.
The purpose of the tests described in this document are to
a) compare the metallurgical weldability of different metals,
b) assess the weldability of differing component designs, e.g. dimensional configuration, stack-up,
projection geometry, etc.,
c) investigate the effect of changes in welding parameters such as welding current, weld time,
electrode force or complex welding schedules including pulse welding, current stepping etc. on
weldability, and/or
d) compare the performance of resistance welding equipment.
Precise details of the test procedure to be used depend on which aspect of items a) to d) will be
evaluated relative to the welding result obtained

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15614-13:2022(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2021)
EN ISO 15614-13:2021

This document specifies tests for the qualification of welding procedure specifications applicable to
upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or
circular cross-section. Its basic principles can also be applied to other resistance welding processes
when this is stated in the specification.
This document defines the conditions for carrying out tests and the limits of validity of a qualified
welding procedure for all the practical welding operations that it covers.
It covers the following resistance welding processes, as defined in ISO 4063:
— 24 flash welding, using direct current or alternating current with various movement sequences,
constant flashing and pulsed flashing;
— 25 resistance upset welding, using direct current or alternating current with various pressure
sequences.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15614-12:2022(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021)
EN ISO 15614-12:2021

This document specifies the tests which can be used for qualification of welding procedure specifications
for spot, seam, and projection welding processes.
NOTE The procedures are written for embossed projection welding. They can be adapted for solid
projections as well, e.g. nut welding, stud welding. cross wire welding.
This document defines the conditions for carrying out tests and the limits of validity of a qualified
welding procedure for all practical welding operations covered by this document.
It covers the following resistance welding processes, as defined in ISO 4063:
— 21 – resistance spot welding;
— 211 – indirect spot welding;
— 212 – direct spot welding;
— 22 – resistance seam welding;
— 221 – lap seam welding;
— 222 – mash seam welding;
— 223 – Prep-lap seam welding;
— 224 – Wire seam welding;
— 225 – foil butt-seam welding;
— 226 – seam welding with strip;
— 23 – projection welding;
— 231 – indirect projection welding;
— 232 – direct projection welding

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3834-5:2022(Main)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
EN ISO 3834-5:2021

This document specifies the International Standards, including clauses and subclauses, with which
conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 can be claimed.
NOTE For brazing, see ISO 22688.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3834-1:2021(Main)
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
EN ISO 3834-1:2021

This document specifies a general outline of the ISO 3834 series and criteria to be taken into account for
the selection of the appropriate level of quality requirements for fusion welding of metallic materials,
among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4.
It is applicable to manufacturing, both in workshops and at field installation sites.
This document does not specify requirements for a total quality management system (QMS). However,
Clause 6 identifies QMS elements where their inclusion complements the ISO 3834 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13918:2018/A1:2021(Amendment)
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
EN ISO 13918:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day