Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)

ISO 14451-1:2013 establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles.

Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 1: Begriffe (ISO 14451-1:2013)

Dieser Teil von ISO 14451 legt die mit den Prüfverfahren und Anforderungen an pyrotechnische Gegenstände für Fahrzeuge verbundenen Begriffe fest.
ANMERKUNG   Zusätzlich zu den Benennungen die in Englisch und Französisch angegeben werden, was zwei der drei offiziellen ISO-Sprachen entspricht, enthält dieses Dokument die entsprechenden Benennungen in Deutsch. Diese werden unter der Verantwortung des Mitglieds für Deutschland (DIN) veröffentlicht und sind nur zur Information angegeben. Nur die Begriffe, die in den offiziellen Sprachen angegeben sind, können als ISO Begriffe angesehen werden.

Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 1: Terminologie (ISO 14451-1:2013)

L'ISO 14451-1:2013 établit une terminologie des méthodes d'essai et des exigences relatives aux articles pyrotechniques pour véhicules.

Pirotehnični izdelki - Pirotehnični izdelki za vozila - 1. del: Terminologija (ISO 14451-1:2013)

Ta standard določa terminologijo za preskusne metode in zahteve za pirotehnične izdelke za vozila.

General Information

Status
Published
Publication Date
19-Mar-2013
Withdrawal Date
29-Sep-2013
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Mar-2013
Due Date
02-Aug-2013
Completion Date
20-Mar-2013

Buy Standard

Standard
EN ISO 14451-1:2013
English, French and German language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 1: Begriffe (ISO 14451-1:2013)Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 1: Terminologie (ISO 14451-1:2013)Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)71.100.30Eksplozivi. PirotehnikaExplosives. Pyrotechnics43.040.99Drugi sistemi za cestna vozilaOther road vehicle systems01.040.71Kemijska tehnologija (Slovarji)Chemical technology (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN ISO 14451-1:2013SIST EN ISO 14451-1:2013en,fr01-maj-2013SIST EN ISO 14451-1:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 14451-1
March 2013 ICS 43.040.80; 01.040.43 English Version
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 1: Terminologie (ISO 14451-1:2013)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 1: Begriffe (ISO 14451-1:2013) This European Standard was approved by CEN on 9 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14451-1:2013: ESIST EN ISO 14451-1:2013

Relationship between this European Standard and the Essential Requirements of EC Directive 2007/23/EC on the placing on the market of pyrotechnic articles .4
Relationship between this European Standard and the Essential Requirements of EC Directive 2007/23/EC on the placing on the market of pyrotechnic articles This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. SIST EN ISO 14451-1:2013

Reference numberNuméro de référenceISO 14451-1:2013(E/F)© ISO 2013
INTERNATIONAL STANDARD NORME INTERNATIONALE
ISO14451-1First editionPremière édition2013-03-15Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 1: Terminology Articles pyrotechniques — Articles pyrotechniques pour véhicules — Partie 1: Terminologie
ISO 14451-1:2013(E/F)
ISO 2013 The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are: that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications offered for sale; and that this International Standard is referenced as the source document. With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale est citée comme document source. À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur. ISO copyright office Case postale 56  CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland/Publié en Suisse
ii
ISO 14451-1:2013(E/F) © ISO 2013 – All rights reserved/Tous droits réservés
iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14451-1 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 212, Pyrotechnic articles, in collaboration with Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). ISO 14451 consists of the following parts, under the general title Pyrotechnic articles — Pyrotechnic articles for vehicles:  Part 1: Terminology  Part 2: Test methods  Part 3: Labelling  Part 4: Requirements and categorization for micro gas generators  Part 5: Requirements and categorization for airbag gas generators  Part 6: Requirements and categorization for airbag modules  Part 7: Requirements and categorization for seatbelt pretensioners  Part 8: Requirements and categorization for igniters  Part 9: Requirements and categorization for actuators  Part 10: Requirements and categorization for semi-finished products
ISO 14451-1:2013(E/F) iv
INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 14451-1:2013(E/F) © ISO 2013 – All rights reserved/Tous droits réservés
1 Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 1: Terminology Articles pyrotechniques — Articles pyrotechniques pour véhicules — Partie 1: Terminologie
Scope
Domaine d'application This part of ISO 14451 establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles. NOTE In addition to terms used in English and French, two of the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN), and are given for information only. Only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
La présente partie de l'ISO 14451 établit une terminologie des méthodes d'essai et des exigences relatives aux articles pyrotechniques pour véhicules. NOTE En complément des termes utilisés anglais et français, deux des trois langues officielles de l'ISO (anglais, français et russe), le présent document donne les termes équivalents en allemand; ces termes sont publiés sous la responsabilité du comité membre allemand (DIN), et sont donnés uniquement pour information. Seuls les termes et définitions dans les langues officielles peuvent être considérés comme étant des termes et définitions de l'ISO.
1 Terms and definitions
1 Termes et définitions 1Begriffe und Defin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.