EN 14612:2003
(Main)Space product assurance - Verification and approval of automatic machine wave soldering
Space product assurance - Verification and approval of automatic machine wave soldering
This specification defines the basic requirements for the verification and approval of automatic machine wave soldering for use in spacecraft hardware. The process requirements for wave soldering of double-sided and multilayer boards are also defined.
Luft- und Raumfahrt - Raumfahrtproduktsicherung - Verifikation und Zulassung von Maschinenschwalllötverfahren
Diese Norm legt Grundanforderungen an Verfahren zur Verifikation und Zulassung des Maschinenschwall-lötens für Hardware in Anwendungen in der Raumfahrt fest, unter besonderer Berücksichtigung von Fertigungsverfahren für zweiseitige Leiterplatten und Mehrschichtleiterplatten.
Assurance produits des projets spatiaux - Validation et approbation du brasage automatique à la vague
La présente norme définit les exigences de base pour la validation et l'approbation du procédé de brasage à la vague effectué par machine automatique à l'usage des véhicules spatiaux. La présente norme définit également les exigences concernant le brasage à la vague des cartes double face et multicouches.
Space product assurance - Verification and approval of automatic machine wave soldering
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Space product assurance - Verification and approval of automatic machine wave solderingLuft- und Raumfahrt - Raumfahrtproduktsicherung - Verifikation und Zulassung von MaschinenschwalllötverfahrenAssurance produits des projets spatiaux - Validation et approbation du brasage automatique a la vagueSpace product assurance - Verification and approval of automatic machine wave soldering49.140Vesoljski sistemi in operacijeSpace systems and operations25.160.50Trdo in mehko lotanjeBrazing and solderingICS:Ta slovenski standard je istoveten z:EN 14612:2003SIST EN 14612:2004en01-maj-2004SIST EN 14612:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14612August 2003ICS 25.160.50; 49.140English versionSpace product assurance - Verification and approval ofautomatic machine wave solderingAssurance produits des projets spatiaux - Validation etapprobation du brasage automatique à la vagueThis European Standard was approved by CEN on 27 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14612:2003 ESIST EN 14612:2004
Process requirements for wave soldering of printed circuit boards.11Annex B (informative)
Solder joint desprepancy log (Example).13Bibliography.15SIST EN 14612:2004
1)ECSS-Q-70-07A.SIST EN 14612:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.