Solid biofuels - Determination of bulk density (ISO 17828:2015)

This document describes a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all solid biofuels with a nominal top size of maximum 100 mm.
Bulk density is not an absolute value, therefore conditions for its determination have to be standandised in order to gain comparative measuring results.
Note 1: The nominal top size is defined as the aperture size of the sieve where at least 95 % by mass of the material passes (ISO DIS 16559 (14588)).
Note 2: Bulk density of solid biofuels is subject to variation due to several factors such as vibration, shock, pressure, biodegradation, drying and wetting. Measured bulk density can therefore deviate from actual conditions during transportation, storage and transhipment.

Feste Biobrennstoffe - Bestimmung der Schüttdichte (ISO 17828:2015)

Diese Internationale Norm definiert ein Verfahren zur Bestimmung der Schüttdichte von biogenen Festbrennstoffen unter Verwendung eines Standard-Messbehälters. Dieses Verfahren gilt für sämtliche schüttbaren biogenen Festbrennstoffe mit einer nominellen Siebgröße von höchstens 100 mm.
Die Schüttdichte ist kein absoluter Wert; daher müssen die Bedingungen für deren Bestimmung genormt sein, um vergleichbare Messergebnisse zu erreichen.
ANMERKUNG   Die Schüttdichte von biogenen Festbrennstoffen unterliegt einer Schwankung aufgrund mehrerer Faktoren, wie z. B. Erschütterung, Stoß, Druck, biologischer Abbau, Trocknen und Nässe/Benetzung. Die gemessene Schüttdichte kann daher von den tatsächlich vorherrschenden Bedingungen während des Transports, der Lagerung oder Umladung abweichen.

Biocombustibles solides - Détermination de la masse volumique apparente (ISO 17828:2015)

ISO 17828:2015 définit une méthode de détermination de la masse volumique apparente des biocombustibles solides à l'aide d'un récipient-mesure standard. Cette méthode s'applique à tout biocombustible solide versable d'une dimension supérieure nominale maximale de 100 mm.
La masse volumique apparente n'étant pas une valeur absolue, il est indispensable de normaliser les conditions de sa détermination afin d'obtenir des résultats de mesure comparatifs.
NOTE          La masse volumique apparente des biocombustibles solides est soumise à des variations aux causes diverses telles que vibrations, chocs, pression, biodégradation, séchage et mouillage. La masse volumique apparente mesurée peut par conséquent s'écarter de celle observée en conditions réelles lors du transport, stockage ou transbordement.

Trdna biogoriva - Določevanje prostorninske mase (ISO 17828:2015)

Ta dokument opisuje metodo za določanje prostorninske mase trdnih biogoriv z uporabo standardnega merilnega vsebnika. Metoda se uporablja za vsa trdna biogoriva z največjo nazivno zrnatostjo 100 mm. Prostorninska masa ni absolutna vrednost, zato je za pridobivanje primerljivih merilnih rezultatov treba standardizirati pogoje njenega določanja. Opomba 1: Nazivna zrnatost je opredeljena kot velikost odprtine sita, skozi katero preide vsaj 95 % mase materiala (ISO DIS 16559 (14588)). Opomba 2: Prostorninska masa trdnih biogoriv se lahko spreminja zaradi različnih dejavnikov, kot so vibracije, udarci, pritisk, biorazgradljivost, sušenje in močenje. Izmerjena prostorninska biomasa se zato med prevozom, shranjevanjem in pretovarjanjem lahko razlikuje od dejanske.

General Information

Status
Published
Public Enquiry End Date
04-Dec-2013
Publication Date
10-Feb-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jan-2016
Due Date
02-Apr-2016
Completion Date
11-Feb-2016

Relations

Buy Standard

Standard
EN ISO 17828:2016
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17828:2016
01-marec-2016
1DGRPHãþD
SIST EN 15103:2010
7UGQDELRJRULYD'RORþHYDQMHSURVWRUQLQVNHPDVH ,62
Solid biofuels - Determination of bulk density (ISO 17828:2015)
Feste Biobrennstoffe - Bestimmung der Schüttdichte (ISO 17828:2015)
Biocombustibles solides - Détermination de la masse volumique apparente (ISO
17828:2015)
Ta slovenski standard je istoveten z: EN ISO 17828:2015
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
SIST EN ISO 17828:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17828:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 17828:2016


EN ISO 17828
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2015
EUROPÄISCHE NORM
ICS 75.160.10; 27.190 Supersedes EN 15103:2009
English Version

Solid biofuels - Determination of bulk density (ISO
17828:2015)
Biocombustibles solides - Détermination de la masse Biogene Festbrennstoffe - Bestimmung der
volumique apparente (ISO 17828:2015) Schüttdichte (ISO 17828:2015)
This European Standard was approved by CEN on 17 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17828:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17828:2016
EN ISO 17828:2015 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17828:2016
EN ISO 17828:2015 (E)
European foreword
This document (EN ISO 17828:2015) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 15103:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17828:2015 has been approved by CEN as EN ISO 17828:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 17828:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 17828:2016
INTERNATIONAL ISO
STANDARD 17828
First edition
2015-12-15
Solid biofuels — Determination of
bulk density
Biocombustibles solides — Détermination de la masse volumique
apparente
Reference number
ISO 17828:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 17828:2016
ISO 17828:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17828:2016
ISO 17828:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
5.1 Measuring containers. 1
5.1.1 General. 1
5.1.2 Large container . 2
5.1.3 Small container . 2
5.2 Balances . 3
5.2.1 Balance 1 . 3
5.2.2 Balance 2 . 3
5.3 Scantlings . 3
5.4 Wooden board . 3
6 Sample preparation . 3
7 Procedure. 3
7.1 Determination of the container volume . 3
7.2 Container selection . 3
7.3 Measurement procedure . 3
8 Calculation . 4
8.1 Calculation of bulk density as received . 4
8.2 Calculation of bulk density on dry basis . 5
9 Performance characteristics . 5
9.1 General . 5
9.2 Repeatability . 5
9.3 Reproducibility . 5
10 Test report . 5
Annex A (informative) Measuring differences of sample treatment with and without
shock impact . 7
Bibliography . 8
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 17828:2016
ISO 17828:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 238, Solid biofuels.
iv © ISO 2015 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 17828:2016
ISO 17828:2015(E)

Introduction
Bulk density is an important parameter for fuel deliveries on volume basis, and together with the net
calorific value, it determines the energy density. It also facilitates the estimation of space requirements
for transport and storage. This International Standard describes the determination of the bulk density
of pourable solid biofuels, which can be conveyed in a continuous material flow.
For practical reasons, two standard measuring containers with a volume of 5 l or 50 l were chosen for the
determination. Due to the limited volume of these containers, some fuels are therefore excluded from
the scope of this International Standard. This, for example, applies for chunk wood, non-comminuted
bark, baled material and larger briquettes. The bulk density of such fuels can be calculated from their
mass an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.