SIST EN ISO 780:2000

Packaging - Pictorial marking for handling of goods (ISO 780:1997)

Verpackung - Bildzeichen für Handhabung von Gütern (ISO 780:1997)

Diese Internationale Norm legt eine Reihe von Bildzeichen fest, die üblicherweise für die Markierung von Transportverpackung bei der physischen Warenverteilung benutzt werden, um Anweisungen für die Handhabung zu geben. Die Bildzeichen sollten nur benutzt werden, wenn dies erforderlich ist. Diese Internationale Norm wird für Verpackungen für jeglichen Inhalt angewendet, aber sie beinhaltet keine spezielle Anweisungen für die Handhabung von gefährlichen Gütern.

Emballages - Marquages graphiques relatifs a la manutention des marchandises (ISO 780:1997)

L'IEC 60598-2-21:2014 spécifie les exigences applicables aux cordons lumineux (guirlandes lumineuses scellées) munis de sources lumineuses montées en série, en parallèle ou en combinaison série/parallèle pour emploi à l'intérieur ou à l'extérieur, pour des tensions d'alimentation ne dépassant pas 250 V.
Cette publication doit être lue conjointement avec la CEI 60598-1:2014.

Embalaža - Slikovno označevanje za ravnanje z izdelki (ISO 780:1997)

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2000
• Withdrawal Date: 03-Jan-2016
• ICS: 01.080.20 - Graphical symbols for use on specific equipment
• ICS: 55.020 - Packaging and distribution of goods in general
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Dec-2015
• Due Date: 15-Jan-2016
• Completion Date: 04-Jan-2016
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN ISO 780:1999 - Packaging - Pictorial marking for handling of goods (ISO 780:1997)

Relations

• Replaced By: SIST EN ISO 780:2016 - Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)
• Effective Date: 01-Feb-2016
• Replaced By: SIST EN ISO 780:2016 - Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)
• Effective Date: 08-Jun-2022
• Replaces: SIST EN 20780:1997 - Packaging - Pictorial marking for handling of goods (ISO 780:1985)
• Effective Date: 01-Apr-2000

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 780:2000
01-april-2000
1DGRPHãþD
SIST EN 20780:1997
(PEDODåD6OLNRYQRR]QDþHYDQMH]DUDYQDQMH]L]GHONL,62
Packaging - Pictorial marking for handling of goods (ISO 780:1997)
Verpackung - Bildzeichen für Handhabung von Gütern (ISO 780:1997)
Emballages - Marquages graphiques relatifs a la manutention des marchandises (ISO
780:1997)
Ta slovenski standard je istoveten z: EN ISO 780:1999
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
SIST EN ISO 780:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 780:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 780:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 780:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 780:2000
INTERNATIONAL ISO
STANDARD 780
Fourth edition
1997-11-15
Packaging — Pictorial marking for handling
of goods
Emballages — Marquages graphiques relatifs à la manutention des
marchandises
A
Reference number
ISO 780:1997(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 780:2000
ISO 780:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 780 was prepared by Technical Committee ISO/TC 122, Packaging.
This fourth edition cancels and replaces the third edition (ISO 780:1985), which has been technically revised.
Annex A of this international Standard is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 780:2000
© ISO
ISO 780:1997(E)
Introduction
Packages are often marked with handling instructions in the language of the country of origin. While this may
safeguard the consignment to some extent, it is of little value for goods consigned to, or through, countries using
different languages, and of no value at all if people handling the packages are illiterate.
Pictorial symbols offer the best possibility of conveying the consignor’s intention and their adoption will, therefore,
undoubtedly reduce loss and damage through incorrect handling.
The symbols specified are in accordance with the rules of ISO/TC 145, Graphical symbols.
The use of pictorial symbols does not provide any guarantee of satisfactory handling; proper protective packaging is
therefore of primary importance.
iii

---------------------- Page: 7 ----------------------

SIST EN ISO 780:2000

---------------------- Page: 8 ----------------------

SIST EN ISO 780:2000
INTERNATIONAL STANDARD  © ISO ISO 780:1997(E)
Packaging — Pictorial marking for handling goods
1 Scope
This International Standard specifies a set of symbols conventionally used for marking of transport packages in their
physical distribution chain to convey handling instructions. The symbols should be used only when necessary.
This International Standard is applicable to packages containing any kind of goods, but does not include instructions
specific to the handling of dangerous goods.
2 Symbols
2.1  Display of symbols
Symbols should preferably be stencilled directly on the package or may appear on a label. It is recommended that
the symbols be painted, printed or otherwise reproduced as specified in this International Standard. They need not
be framed by border lines.
The graphical design of each symbol shall have only one meaning; symbols are purposely designed so that they
can also be stencilled without changing the graphics.
2.2  Colour of symbols
The colour used for symbols shall be black.
If the colour of the package is such that the black symbol would not show clearly, a panel of a suitable contrasting
colour, preferably white, shall be provided as a background.
Care shall be taken to avoid the use of colours which could result in confusion with the labelling of dangerous
goods. The use of red, orange or yellow shall be avoided unless regional or national regulations require such use.
2.3  Size of symbols
For normal purposes the overall height of the symbols shall be 100 mm, 150 mm or 200 mm.
The size or shape o
...