SIST EN ISO 683-17:2023

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)

This document specifies the technical delivery requirements for five groups of wrought ball and roller
bearing steels as listed in Table 3, namely
— through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr),
— case-hardening bearing steels,
— induction-hardening bearing steels (unalloyed and alloyed),
— stainless bearing steels, and
— high-temperature bearing steels.
This document is applicable to the products and heat-treatment conditions given in Table 1 and the
surface conditions given in Table 2.

Für eine Wärmebehandlung bestimmte Stähle, legierte Stähle und Automatenstähle - Teil 17: Wälzlagerstähle (ISO 683-17:2023)

1.1   Dieser Teil von ISO 683 enthält die technischen Lieferbedingungen für fünf Gruppen von Wälzlager-stählen, wie in Tabelle 3 aufgeführt, nämlich
durchhärtende Wälzlagerstähle (Stähle mit ungefähr 1 % C und 1 % bis 2 % Cr),
einsatzhärtende Wälzlagerstähle,
induktionshärtende Wälzlagerstähle (unlegiert und legiert),
nichtrostende Wälzlagerstähle,
warmharte Wälzlagerstähle.
1.2   Dieser Teil von ISO 683 gilt für die in Tabelle 1 angegebenen Erzeugnisse und Wärmebehandlungs-zustände und die Oberflächenzustände nach Tabelle 2.
1.3   Zusätzlich zu diesem Teil von ISO 683 gelten die allgemeinen technischen Lieferbedingungen nach ISO 404.

Aciers pour traitement thermique, aciers alliés et aciers pour décolletage - Partie 17: Aciers pour roulements (ISO 683-17:2023)

l'ISO 683-17:2014 spécifie les prescriptions techniques de livraison pour les cinq groupes d'aciers pour roulements: aciers pour roulements trempés à c?ur (aciers contenant environ 1 % de C et 1 % à 2 % de Cr); aciers de cémentation pour roulements; aciers pour trempe par induction (non alliés et alliés) pour roulements; aciers inoxydables pour roulements; et aciers pour roulements résistant à chaud.

Toplotno obdelana jekla, legirana in avtomatna jekla - 17. del: Jekla za kroglične in valjčne ležaje (ISO 683-17:2023)

Ta dokument določa tehnične dobavne pogoje za pet skupin gnetnih krogličnih in valjčnih
ležajev, kot je navedeno v preglednici 3, in sicer:
– prekaljeni ležaji (jekla s približno 1 % C in 1 % do 2 % Cr);
– cementacijsko kaljeni ležaji;
– indukcijsko kaljeni ležaji (nelegirani in legirani);
– nerjavni ležaji in
– visokotemperaturni ležaji.
Dokument se uporablja za izdelke in pogoje toplotne obdelave, ki so podani v preglednici 1, ter
površinska stanja, podana v preglednici 2.

General Information

• Status: Published
• Public Enquiry End Date: 17-Jul-2022
• Publication Date: 24-Oct-2023
• ICS: 21.100.20 - Rolling bearings
• ICS: 77.140.10 - Heat-treatable steels
• ICS: 77.140.20 - Stainless steels
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Oct-2023
• Due Date: 16-Dec-2023
• Completion Date: 25-Oct-2023
• Ref Project: EN ISO 683-17:2023 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)

Relations

• Revised: SIST EN ISO 683-17:2015 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 683-17:2023
01-december-2023
Toplotno obdelana jekla, legirana in avtomatna jekla - 17. del: Jekla za kroglične in
valjčne ležaje (ISO 683-17:2023)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing
steels (ISO 683-17:2023)
Für eine Wärmebehandlung bestimmte Stähle, legierte Stähle und Automatenstähle -
Teil 17: Wälzlagerstähle (ISO 683-17:2023)
Aciers pour traitement thermique, aciers alliés et aciers pour décolletage - Partie 17:
Aciers pour roulements (ISO 683-17:2023)
Ta slovenski standard je istoveten z: EN ISO 683-17:2023
ICS:
21.100.20 Kotalni ležaji Rolling bearings
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.20 Visokokakovostna jekla Stainless steels
SIST EN ISO 683-17:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 683-17:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 683-17:2023


EN ISO 683-17
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2023
EUROPÄISCHE NORM
ICS 21.100.20; 77.140.10 Supersedes EN ISO 683-17:2014
English Version

Heat-treated steels, alloy steels and free-cutting steels -
Part 17: Ball and roller bearing steels (ISO 683-17:2023)
Aciers pour traitement thermique, aciers alliés et Für eine Wärmebehandlung bestimmte Stähle, legierte
aciers pour décolletage - Partie 17: Aciers pour Stähle und Automatenstähle - Teil 17: Wälzlagerstähle
roulements (ISO 683-17:2023) (ISO 683-17:2023)
This European Standard was approved by CEN on 5 September 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 683-17:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 683-17:2023
EN ISO 683-17:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 683-17:2023
EN ISO 683-17:2023 (E)
European foreword
This document (EN ISO 683-17:2023) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 5 “Steels for heat treatment, alloy steels, free-
cutting steels and stainless steels” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 683-17:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
Uni
...

SLOVENSKI STANDARD
oSIST prEN ISO 683-17:2022
01-junij-2022
Toplotno obdelana jekla, legirana in avtomatna jekla - 17. del: Jekla za kroglične in
valjčne ležaje (ISO/DIS 683-17:2022)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing
steels (ISO/DIS 683-17:2022)
Für eine Wärmebehandlung bestimmte Stähle, legierte Stähle und Automatenstähle -
Teil 17: Wälzlagerstähle (ISO/DIS 683-17:2022)
Aciers pour traitement thermique, aciers alliés et aciers pour décolletage - Partie 17:
Aciers pour roulements (ISO/DIS 683-17:2022)
Ta slovenski standard je istoveten z: prEN ISO 683-17
ICS:
21.100.20 Kotalni ležaji Rolling bearings
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.20 Visokokakovostna jekla Stainless steels
oSIST prEN ISO 683-17:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 683-17:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 683-17:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 683-17
ISO/TC 17/SC 4 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-04-26 2022-07-19
Heat-treatable steels, alloy steels and free-cutting steels —
Part 17:
Ball and roller bearing steels
Partie 17: Aciers pour roulements
ICS: 21.100.20; 77.140.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 683-17:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 683-17:2022
ISO/DIS 683-17:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 683-17:2022
ISO/DIS 683-17:2022(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and designation . 2
4.1 Classification . 2
4.2 Designation . 2
5 Information to be supplied by the purchaser . 2
5.1 Mandatory information .
...