SIST EN 288-3:1996

Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels

This standard specifies how a welding procedure specification is approved by welding procedure tests.   It defines the conditions for the execution of welding procedure approval tests and the limits of validity of an approved welding procedure for all practical welding operations within the range of variables listed in clause 8.  Tests shall be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard or contract when these shall apply.  This standard applies to the arc welding of steels. The principles of this standard may be applied to other fusion welding processes subject to agreement between the contracting parties.  Note: Specific service, material or manufacturing conditions may require more comprehensive testing than is specified by this standard in order to gain more information and to avoid repeating the welding procedure test at a later date just to obtain additional test data.  Such tests may include:  - longitudinal weld tensile test; - all weld metal bend test; - Charpy V-notch impact test; - yield strength or 0,2 % proof stress; - elongation; - chemical analysis; - micro examination; - delta ferrite determination in austenitic stainless steels.  Arc welding is covered by the following processes in accordance with EN 24063:  111 - metal-arc welding with covered electrode; 114 - flux-cored wire metal-arc welding without gas shield; 121  - submerged arc welding with wire electrode;1) 122 - submerged arc welding with strip electrode;1) 131 - metal-arc inert gas welding (MIG welding); 135 - metal-arc active gas welding (MAG welding); 136 - flux-cored wire metal-arc welding with active gas shield; 141 - tungsten inert gas arc welding (TIG welding); 15  - plasma arc welding;  other fusion welding processes by agreement e.g. metal cored wire arc welding.  1. As modified by Amendment A1 :1997

Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe - Teil 3: Schweißverfahrensprüfungen für das Lichtbogenschweißen von Stählen

Diese Norm legt fest, wie eine Schweissanweisung durch eine Schweissverfahrensprüfung anerkannt wird. Sie erklärt die Bedingungen für die Durchführung der Schweissverfahrensprüfung und die Grenzen der Gültigkeit eines anerkannten Schweissverfahrens für alle praktischen schweisstechnischen Tätigkeiten innerhalb des Bereiches der Einflussgrössen nach Abschnitt 8. Die Prüfungen sind nach dieser Norm durchzuführen, es sei denn, dass durch die entsprechende Anwendungsnorm oder durch den Vertrag schärfere Prüfungen festgelegt werden und diese anzuwenden sind.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Partie 3: Epreuve de qualification d'un mode opératoire de soudage a l'arc sur acier

La présente norme spécifie comment un descriptif de mode de soudage est qualifié par epreuve. Elle définit les conditions d'exécution des épreuves de qualification et les limites de validité d'un mode opératoire qualifié, pour toutes les opérations pratiques de soudage englobant la liste des variables mentionnées au paragraphe 8. Les épreuves de qualification sont réalisés conformément a la présente norme, sauf si une norme d'application ou un contrat prescrit des essais plus séveres au regard de leur domaine d'application.

Popis in odobritev varilnih postopkov za kovinske materiale - 3. del: Preskusi varilnih postopkov za obločno varjenje jekel

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-1994
• Withdrawal Date: 31-Aug-2004
• ICS: 25.160.10 - Welding processes
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: EN 288-3:1992 - Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels

Relations

• Replaced By: SIST EN ISO 15614-1:2004 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
• Effective Date: 01-Jun-1996
• Replaced By: SIST EN 288-3:1996 - Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
• Effective Date: 01-Jun-1996
• Amended By: SIST EN 288-3:1996/A1:1999 - Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
• Effective Date: 22-Dec-2008
• Replaces: SIST EN 288-3:1996 - Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
• Effective Date: 01-Jun-1996