SIST EN 15016-3:2023
(Main)Railway applications - Technical documents - Part 3: Handling of modifications of technical documents
Railway applications - Technical documents - Part 3: Handling of modifications of technical documents
This document applies throughout the total life span of the documents. This document applies to all the railway organisations and partners concerned with technical documents and to suppliers preparing documents on behalf of railway companies or railway network users.
This document describes the basis of revising technical design documents for railway applications, without considering additional company requirements.
These basic requirements apply to all technical design documents independent of the material form: e.g. transparency originals, plotter drawings, aperture cards, computer readable data media, photoprints, COM-fiches etc., also for a computerised set of information.
Bahnanwendungen - Technische Dokumente - Teil 3: Behandlung von Änderungen technischer Dokumente
Dieses Dokument gilt während der gesamten Nutzungsdauer der Dokumente. Dieses Dokument gilt für alle Bahnorganisationen und deren Partner, die für technische Dokumente zuständig sind, und für Lieferanten, die Dokumente im Auftrag von Bahnunternehmen oder Benutzern von Bahnnetzen ausarbeiten.
Dieses Dokument beschreibt die grundlegenden Anforderungen an die Änderung technischer Konstruktions-Dokumente für Bahnanwendungen, ohne weitere Anforderungen von Unternehmen zu berücksichtigen.
Die grundlegenden Anforderungen gelten für alle technischen Konstruktions-Dokumente, unabhängig von ihrer materiellen Form, z. B. Diapositiv-Originale, Plotter-Zeichnungen, Lochkarten, rechnerlesbare Datenmedien, Fotoabzüge, COM-Mikrofiches usw., sowie für rechnergestützte Datensätze.
Applications ferroviaires - Documents techniques - Partie 3 : Gestion des modifications des documents techniques
Le présent document s'applique pendant toute la durée de validité des documents. Il s'applique à toutes les organisations ferroviaires et à tous les partenaires concernés par les documents techniques, ainsi qu'aux fournisseurs qui rédigent des documents pour le compte de sociétés ferroviaires ou d'usagers des réseaux de chemins de fer.
Le présent document décrit le principe de base de la révision de documents techniques dans le domaine des applications ferroviaires, sans tenir compte des autres exigences des sociétés.
Ces exigences fondamentales s'appliquent à tous les documents techniques, quelle que soit leur forme matérielle : par exemple, transparents d'origine, dessins tracés, cartes à fenêtre, supports de données lisibles sur ordinateur, photographies imprimées, fiches COM etc., ainsi qu'aux ensembles d'informations sur support informatique.
Železniške naprave - Tehnična dokumentacija - 3. del: Obvladovanje sprememb tehnične dokumentacije
Ta dokument se uporablja vso življenjsko dobo dokumentacije. Ta dokument se uporablja za vse železniške organizacije in partnerje, ki se ukvarjajo s tehnično dokumentacijo, ter za dobavitelje, ki pripravljajo dokumentacijo v imenu železniških podjetjih ali uporabnikov železniškega omrežja.
Ta dokument opisuje osnovo za revizijo tehnične konstrukcijske dokumentacije za železniške naprave, brez upoštevanja dodatnih zahtev podjetja.
Te osnovne zahteve veljajo za vso tehnično konstrukcijsko dokumentacijo neodvisno od materialne oblike: npr. izvirniki prosojnic, ploskovne risbe, aperturne kartice, računalniško berljivi nosilci podatkov, fototiski, COM-fiši itd., tudi za računalniški nabor informacij.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15016-3:2023
01-oktober-2023
Železniške naprave - Tehnična dokumentacija - 3. del: Obvladovanje sprememb
tehnične dokumentacije
Railway applications - Technical documents - Part 3: Handling of modifications of
technical documents
Bahnanwendungen - Technische Dokumente - Teil 3: Behandlung von Änderungen
technischer Dokumente
Applications ferroviaires - Documents techniques - Partie 3 : Gestion des modifications
des documents techniques
Ta slovenski standard je istoveten z: EN 15016-3:2023
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
45.020 Železniška tehnika na Railway engineering in
splošno general
SIST EN 15016-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15016-3:2023
---------------------- Page: 2 ----------------------
SIST EN 15016-3:2023
EN 15016-3
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 01.100.01; 45.020 Supersedes EN 15016-3:2004
English Version
Railway applications - Technical documents - Part 3:
Handling of modifications of technical documents
Applications ferroviaires - Documents techniques - Bahnanwendungen - Technische Dokumente - Teil 3:
Partie 3 : Gestion des modifications des documents Behandlung von Änderungen technischer Dokumente
techniques
This European Standard was approved by CEN on 9 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15016-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15016-3:2023
EN 15016-3:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Reference to revised documents . 6
5 Revision procedure . 6
5.1 Designation of revisions . 6
5.2 Revision notification . 6
5.2.1 Documentation procedure . 6
5.2.2 Revision notification number . 6
5.2.3 Structure of a revision notification . 6
5.2.4 Archiving .
...
SLOVENSKI STANDARD
oSIST prEN 15016-3:2022
01-junij-2022
Železniške naprave - Tehnična dokumentacija - 3. del: Obvladovanje sprememb
tehnične dokumentacije
Railway applications - Technical documents - Part 3: Handling of modifications of
technical documents
Bahnanwendungen - Technische Dokumente - Teil 3: Behandlung von Änderungen
technischer Dokumente
Applications ferroviaires - Documents techniques - Partie 3 : Gestion des modifications
des documents techniques
Ta slovenski standard je istoveten z: prEN 15016-3
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN 15016-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15016-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN 15016-3:2022
DRAFT
EUROPEAN STANDARD
prEN 15016-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 01.100.01; 45.020 Will supersede EN 15016-3:2004
English Version
Railway applications - Technical documents - Part 3:
Handling of modifications of technical documents
Applications ferroviaires - Documents techniques - Bahnanwendungen - Technische Dokumente - Teil 3:
Partie 3 : Gestion des modifications des documents Behandlung von Änderungen technischer Dokumente
techniques
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15016-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15016-3:2022
prEN 15016-3:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Reference to revised documents . 6
5 Revision procedure . 6
5.1 Designation of revisions . 6
5.2 Revision notification . 6
5.2.1 Documentation procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.